Skip to main content
Sleeveless Neck Arrival Printed Round Cartoon Tee Loose New Tank 3D Sports 1SBAqAY Sleeveless Neck Arrival Printed Round Cartoon Tee Loose New Tank 3D Sports 1SBAqAY Sleeveless Neck Arrival Printed Round Cartoon Tee Loose New Tank 3D Sports 1SBAqAY Sleeveless Neck Arrival Printed Round Cartoon Tee Loose New Tank 3D Sports 1SBAqAY Sleeveless Neck Arrival Printed Round Cartoon Tee Loose New Tank 3D Sports 1SBAqAY Sleeveless Neck Arrival Printed Round Cartoon Tee Loose New Tank 3D Sports 1SBAqAY
Specifications

Sleeveless Neck Arrival Printed Round Cartoon Tee Loose New Tank 3D Sports 1SBAqAY

See other formats


TOSHIBA 

Leading Innovation 


Integrated High Definition LED 
Television Usefs Guide: 

42L6200U 

47L6200U 

55L6200U 

47L7200U 

55L7200U 

If you need assistance: 

Toshiba's Support Web site support.toshiba.com 
Toshiba Customer Support Center: 

Calling within the United States at (800) 631-3811 

Calling from outside the United States at (949) 583-3050 

For more information, see "Troubleshooting’' on page 181 in this guide. 

Owner's Record 

The model number and serial number are on the back and side of your television. 
Record these numbers, whenever you communicate with your Toshiba dealer 
about this Television. 

Model name:_ 

Serial number:_ 

Register your Toshiba Television at register.toshiba.com 


LED 


Note: To display a High Definition 
picture, the TV must be receiving a 
High Definition signal (such as an over- 
the-air High Definition TV broadcast, a 
High Definition digital cable program, or 
a High Definition digital satellite 
program). For details, contact your TV 
antenna installer, cable provider, or 
satellite provider 


GMA300007010 

3/12 





2 


Dear Customer, 

Thank you for purchasing this Toshiba LED TV. This 
manual will help you use the many exciting features of 
your new LED TV. Before operating your LED TV, 
carefully read this manual completely. 


Safety Precautions 

WARNING : TO REDUCE THE RISK OF FIRE OR 
ELECTRIC SHOCK, DO NOT EXPOSE THIS 
APPLIANCE TO RAIN OR MOISTURE. 



WARNING: TO REDUCE THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE COVER (OR BACK). 

NO USER-SERVICEABLE PARTS INSIDE. REFER 
SERVICING TO QUALIFIED SERVICE PERSONNEL. 


The lightning flash with arrowhead 
symbol, within an equilateral triangle, is 
intended to alert the user to the presence 
of uninsulated “dangerous voltage" within 
the product's enclosure that may be of 
sufficient magnitude to constitute a risk of 
electric shock to persons. 

The exclamation point within an 
/1\ equilateral triangle is intended to alert the 
/ I \ user to the presence of important 
/ • \ °P erat ' n 9 ar, d maintenance (servicing) 

L ---instructions in the literature 

accompanying the appliance. 


WARNING 

To prevent injury, this apparatus must be securely 
attached to the floor/wall in accordance with the 
installation instructions. See item 26) on page 4. 


WARNING: If you decide to wall mount this 
television, always use a mounting bracket that has 
been Listed by an independent laboratory (such as 
UL, CSA ETL) and is appropriate for the size and 
weight of this television. The use of inappropriate or 
non-Listed mounting brackets could result in serious 
bodily injury and/or property damage. See “To 
Display your LED TV using a Wall Bracket:” on 
page 5. 


NOTE TO CATV INSTALLERS 

This is a reminder to call the CATV system installer’s 
attention to Article 820-40 of the U.S. NEC, which 
provides guidelines for proper grounding and, in 
particular, specifies that the cable ground shall be 
connected to the grounding system of the building, as 
close to the point of cable entry as practical. For 
additional antenna grounding information, see items 
33) and 34) on page 4. 


CHILD SAFETY: 

It Makes A Difference How and Where You Use Your Flat 
Panel Display 


Congratulations on your purchasel As you enjoy your 
new product, please keep these safety tips in mind: 

The Issue 

• The home theater entertainment experience is a growing trend 
and larger flat panel displays are popular purchases. However, 
flat panel displays are not always supported on the proper stands 
or installed according to the manufacturer’s recommendations. 

• Flat panel displays that are 

inappropriately situated on dressers, 
bookcases, shelves, desks, 
speakers, chests or carts may fall 
over and cause injury. 

TOSHIBA Cares! 

• The consumer electronics industry 
is committed to making home 
entertainment enjoyable and safe. 

Tune Into Safety 

• One size does NOT fit all. Follow the manufacturer’s recommendations 
for the safe installation and use of your flat panel display. 

• Carefully read and understand all enclosed instructions for 
proper use of this product. 

• Don’t allow children to climb on or play with furniture and 
television sets. 

• Don’t place flat panel displays on furniture 
that can easily be used as steps, such 
as a chest of drawers. 

• Remember that children can 
become excited while watching a 
program, especially on a “larger 
than life” flat panel display. Care 
should be taken to place or install 
the display where it cannot be 
pushed, pulled over, or knocked down. 

• Care should be taken to route all cords and 
cables connected to the flat panel display so that they cannot be 
pulled or grabbed by curious children. 

Wall Mounting: If you decide to wall mount your 
flat panel display, always: 

• Use a mount that has been recommended by the display 
manufacturer and/or listed by an independent laboratory (such 
as UL, CSA, ETL). 

• Follow all instructions supplied by the display and wall mount 
manufacturers. 

• If you have any doubts about your ability to safely install your 
flat panel display, contact your retailer about professional 
installation. 

• Make sure that the wall where you are mounting the display is 
appropriate. Some wall mounts are not designed to be mounted 
to walls with steel studs or old cinder block construction. If you 
are unsure, contact a professional installer. 

• A minimum of two people are 
required for installation. Flat panel 
displays can be heavy. 

www.CE.org/safety 

























3 


Important Safety Instructions 

1) Read these instructions. 

2) Keep these instructions. 

3) Heed all warnings. 

4) Follow all instructions. 

5) Do not use this apparatus near water. 


glass and a toxic liquid. If the liquid comes in 
contact with your mouth or eyes, or your skin is 
cut by broken glass, rinse the affected area 
thoroughly with water and contact your doctor 
immediately. 

ALWAYS contact a service technician to inspect 
the TV any time it has been damaged or 
dropped. 


6) Clean only with dry cloth. 

7) Do not block any ventilation openings. Install in 
accordance with the manufacturer’s instructions. 

8) Do not install near any heat sources such as 
radiators, heat registers, stoves, or other products 
(including amplifiers) that produce heat. 

9) Do not defeat the safety purpose of Wide blade 

the polarized or grounding type “ \ (jS 

plug. A polarized plug has two 

blades with one wider than the < 0 %^® 

other. A grounding type plug has 

two blades and a third grounding 

prong. The wide blade or the third prong are 

provided for your safety. If the provided plug does 

not fit into your outlet, consult an electrician for 

replacement of the obsolete outlet. 

10) Protect the power cord from being walked on or 
pinched, particularly at plugs, convenience 
receptacles, and the point where they exit from the 
apparatus. 

11) Only use attachments/accessories specified by 
the manufacturer. 


12) Use only with the cart, stand, 
tripod, bracket, or table 
specified by the manufacturer, 
or sold with the apparatus. 

When a cart is used, use caution 
when moving the cart/apparatus 
combination to avoid injury from 
tip-over. 


15) CAUTION: 

• To reduce the risk of electric shock, do not use 
the polarized plug with an extension cord, 
receptacle, or other outlet unless the blades can 
be inserted completely to prevent blade 
exposure. 

• To prevent electric shock, match wide blade of plug 
to wide slot; fully insert. 

16) CAUTION: 

• Do not let children swallow any small parts 
included on or with the product or play with the 
plastic bag. Keep the small parts and the plastic 
bag out of the reach of children. 

17) CAUTION: 

• Do not let water or other liquids come into 
contact with the product, as it may result in 
damage. 

18) WARNING: 

• To prevent the spread of fire, keep candles or 
other open flames away from this product at all 
times. 

• Keep the product away from direct sunlight, fire 
or a heat source such as a heater. This may 
reduce the product lifetime or result in fire. 

Installation, Care, and Service 

Installation 

Follow these recommendations and precautions and 

heed all warnings when installing your TV: 



13) Unplug this apparatus during lightning storms 
or when unused for long periods of time. 

14) Refer all servicing to qualified service 
personnel. Servicing is required when the 
apparatus has been damaged in any way, such as 
power-supply cord or plug is damaged, liquid has 
been spilled or objects have fallen into the 
apparatus, the apparatus has been exposed to rain 
or moisture, does not operate normally, or has been 
dropped. 


Additional Safety Precautions 

14a) CAUTION: If the TV is dropped and the cabinet or 
enclosure surface has been damaged or the TV 
does not operate normally, take the following 
precautions: 

• ALWAYS turn off the TV and unplug the power cord 
to avoid possible electric shock or fire. 

• NEVER allow your body to come in contact with 
any broken glass or liquid from the damaged 
television. The LCD panel inside the TV contains 


19) WARNING: NEVER expose 

batteries to excessive heat such as 
/ 5 \ sunshine, fire, or the like. 


20) ALWAYS plug the product into an outlet that is 
located in such a manner that it can be easily 
unplugged in case the product requires service. 

21) NEVER route the product’s power cord inside a 
wall or similar enclosed area. 


22) Never modify this equipment. Changes or 

modifications may void: a) the warranty, and b) the 
user’s authority to operate this equipment under 
the rules of the Federal Communications 
Commission. 


DANGER: RISK OF 
SERIOUS PERSONAL 
INJURY, DEATH, OR 
EQUIPMENT DAMAGE! 

Never place the TV on an unstable 
cart, stand, or table. The TV may 
fall, causing serious personal injury, 
death, or serious damage to the TV. 


! 
























4 


24) When selecting a location for the TV, 

• NEVER allow any part of the TV to hang over 
the edge of the supporting furniture, 

• NEVER place the TV on tall furniture (for 
example, entertainment centers or bookcases) 
without anchoring both the furniture and the TV 
to a suitable support, 

• Never place cloth or other material between the 
TV and the supporting furniture. 

• NEVER allow children to climb on the TV 

25) To avoid damage to this product, never place or 
store the TV in direct sunlight; hot, humid areas; or 
areas subject to excessive dust or vibration. 

26) Always place the TV on the floor or a sturdy, level, 
stable surface that can support the weight of the 
unit. To secure the TV, use a sturdy strap from the 
hook(s) on the rear of the TV to a wall stud, pillar, 
or other immovable structure. Make sure the strap 
is tight, secure, and parallel to the floor. 


Mounting screw 
(supplied) 


TV back 


Screw hole 


27) The apparatus shall not be exposed to dripping or 
splashing, and that no objects filled with liquids, 
such as vases, shall be placed on the apparatus. 

28) Never block or cover the slots or openings in the 
TV cabinet back, bottom, and sides. Never place 
the TV: 

• on a bed, sofa, rug, or similar surface; 

• too close to drapes, curtains, or walls; or 

• in a confined space such as a bookcase, built-in 
cabinet, or any other place with poor ventilation. 

The slots and openings are provided to protect the 
TV from overheating and to help maintain reliable 
operation of the TV. Leave a space of at least 4 
(four) inches around the TV. 

29) Always leave a space of at least 4 (four) inches 
around the TV. The slots and openings are 
provided to protect the TV from overheating and to 
help maintain reliable operation of the TV. 

30) Never allow anything to rest on or roll over the 
power cord, and never place the TV where the 
power cord is subject to wear or abuse. 

31) Never overload wall outlets and extension cords. 

32) Always operate this equipment from a 120V AC, 
60 Hz power source. 

33) Always make sure the antenna system is properly 
grounded to provide adequate protection against 
voltage surges and built-up static charges (see 
Section 810 of the National Electric Code). 



I DANGER: RISK OF SERIOUS 
! PERSONAL INJURY OR DEATH! 

Use extreme care to make sure you are never in 
a position where your body (or any item you are 
in contact with, such as a ladder or screwdriver) 
can accidentally touch overhead power lines. 
Never locate the antenna near overhead power 
lines or other electrical circuits. 

Never attempt to install any of the following 
during lightning activity: a) an antenna system; 
or b) cables, wires, or any home theater 
component connected to an antenna or phone 
system. 


Care 

For better performance and safer operation of your 
TOSHIBA TV, follow these recommendations and 
precautions: 

35) If you use the TV in a room whose temperature is 
32° F (0° C) or below, the picture brightness may 
vary until the LCD warms up. This is not a sign of 
malfunction. 

36) 


WARNING: RISK OF SERIOUS 
PERSONAL INJURY OR 
EQUIPMENT DAMAGE! 

• Never use chemicals (such as air fresheners, 
cleaning agents, etc.) on or near the TV 
pedestal. Studies indicate that plastics may 
weaken and crack over time from the combined 
effects of chemical agents and mechanical 
stress (such as the weight of the TV). Failure to 
follow these instructions could result in serious 
injury and/or permanent damage to TV and TV 
pedestal. 

• Always unplug the TV before cleaning. Gently 
wipe the display panel surface (the TV screen) 
using a dry, soft cloth (cotton, flannel, etc.). A 
hard cloth may damage the surface of the panel. 
Avoid contact with alcohol, thinner, benzene, 
acidic or alkaline solvent cleaners, abrasive 
cleaners, or chemical cloths, which may damage 
the surface. Never spray volatile compounds 
such as insecticide on the cabinet. Such 
products may damage or discolor the cabinet. 

37) Never hit, press, or place anything on the back 
cover. These actions will damage internal parts. 


























5 


38) 

L WARNING: I 

7 RISK OF ELECTRIC SHOCK! ! 

Never spill liquids or push objects of any kind into 
the TV cabinet slots. 

39) During a lightening storm, do not touch the 
connecting cables or product. 

40) For added protection of your TV from lightning and 
power surges, always unplug the power cord and 
disconnect the antenna from the TV if you leave 
the TV unattended or unused for long periods of 
time. 


41) Always unplug the TV to completely disconnect 
from mains power. When the TV is turned off using 
the on/off switch, it is not completely disconnected 
from power and a minute amount of current is still 
consumed. 


42) During normal use, the TV may make occasional 
snapping or popping sounds. This is normal, 
especially when the unit is being turned on or off. If 
these sounds become frequent or continuous, 
unplug the power cord and contact a Toshiba 
Authorized Service Provider. 

43) WARNING: RISK OF SERIOUS 

L PERSONAL INJURY OR 

7 EQUIPMENT DAMAGE! 

Never strike the screen with a sharp or heavy 
object. 

44) • The LCD screen of this product can be damaged 

by ultraviolet radiation from the sun. When 
selecting a location for the television, avoid 
locations where the screen may be exposed to 
direct sunlight, such as in front of a window. 

• Never touch, press, or place anything on the 
LCD screen. These actions will damage the LCD 
screen. If you need to clean the LCD screen 
follow the instructions (in item 36) on page 4. 

Service 

L WARNING: I 

7 RISK OF ELECTRIC SHOCK! ! 

Never attempt to service the TV yourself. Opening 
and removing the covers may expose you to 
dangerous voltage or other hazards. Failure to 
follow this WARNING may result in death or 
serious injury. Refer all servicing not specified in 
this manual to a Toshiba Authorized Service 
Provider. 


45) If you have the TV serviced: 

• Ask the service technician to use only 
replacement parts specified by the 
manufacturer. 

• Upon completion of service, ask the service 
technician to perform routine safety checks to 
determine that the TV is in safe operating 
condition. 


Choosing a location for your LED TV 

To Display your LCD TV on the included Pedestal 
Stand: 

Observe the following safety precautions: 

1) Read and follow the pedestal assembly 
instructions included with the pedestal. 

CAUTION: Before beginning pedestal assembly, 
carefully lay the front of the LCD Panel face down 
on a flat, cushioned surface such as a quilt or 
blanket. Leave the bottom of the unit protruding 
over the edge of the surface and assemble the 
pedestal as indicated below. 

Note: Extreme care should always be used when 
attaching the pedestal stand to avoid damage to 
the LCD panel. 

2) Place the TV on a sturdy, level surface that can 
support the weight of the TV. 

3) Be sure to secure the TV to a wall, pillar, surface, 
or other immovable structure see item 26) page 4 
for additional details. 

To Display your LED TV using a Wall Bracket: 

If you decide to wall mount your LED TV, always use a 
wall bracket Listed by an independent laboratory 
(such as UL, CSA, ETL) that is appropriate for the size 
and weight of the TV (see page 2): 

1) CAUTION: Two people are required for 
installation. 

2) Unplug and remove any cables and/or other 
component connectors from the rear of the TV. 

3) Remove the screws of the VESA Mounting Pattern 
show in the table below. 

CAUTION: Do not use the screws removed from 
the back cover to attach the wall mount bracket to 
the TV. 

4) Always use the screws supplied or recommended 
by the wall mount manufacturer. 

5) Follow the instructions provided with your wall 
bracket. Before proceeding, make sure the 
appropriate bracket(s) are attached to the wall and 
the back of the TV as described in the instructions 
provided with the wall bracket. 

6) After attaching the appropriate bracket(s) to the 
wall and the back of the TV, remove the pedestal 
stand from the TV, as described below. 

7) VESA Mounting Pattern 


TV Size 

Hole Pattern (HxV) 

Screw Size 

42L6200U 

400x400 mm 

M6 

47L6200U 

400x400 mm 

M6 

55L6200U 

400x400 mm 

M6 

47L7200U 

400x400 mm 

M6 

55L7200U 

400x400 mm 

M6 


(unit in mm) 

















6 


Removing the Pedestal Stand 

1) Carefully lay the front of the unit face down on a 
flat, cushioned surface such as a quilt or blanket. 
Leave the stand protruding over the edge of the 
surface. 

Note: Extreme care should always be used when 
removing the pedestal stand to avoid damage to 
the LCD panel. 

2) Remove the screws shown in the below diagram. 
This will allow removal of the pedestal stand. 

3) Once you have removed all of the screws holding 
the pedestal stand in place, remove the pedestal 
stand from the TV. 



CAUTION: Always place the TV on the floor or a 
sturdy, level, stable surface that can support the 
weight of the unit. Secure the TV with the 
securement clip and a sturdy strap from the hooks 
on the rear of the TV pedestal to a wall stud, pillar, 
or other immovable structure. Make sure the strap 
is tight, secure, and parallel to the floor. 

Safety Precautions for 3D glasses 

About handling the 3D glasses 

• Do not repair, modify, or disassemble the 3D glasses 
by yourself. Doing so may cause you to become 
indisposed while viewing 3D images. 

CAUTION: 

About the 3D glasses 

• Carefully read instructions provided with your 
display and/or 3D glasses before 3D viewing. 

• Do not use the 3D glasses if they are cracked, 
broken, or not working properly. 

Continuing to use them in such a state may cause 
injury, eye strain, or indisposition. 

• Do not drop, exert pressure on, or step on the 3D 
glasses. Doing so may damage the glass section which 
may result in injury. Exposing the 3D glasses to liquid or 
excessive heat may damage the function. 

• Do not stand or walk while wearing 3D glasses. 

You may lose your balance which could result in falls 
or other accidents. 

• Do not wear the 3D glasses for any purpose other 
than viewing 3D programming. 


3D glasses do not function as sunglasses. 

• If your nose or temple turns red, or you feel any pain 
or discomfort, stop using the 3D glasses. 

Such symptoms may occur when wearing 3D 
glasses for long periods of time. 

Cautions on watching the 3D images 

• Some viewers may experience a seizure or blackout 
when exposed to certain flashing images or lights 
contained in certain 3D television pictures or video 
games. 

Anyone who has had a seizure, loss of awareness, or 
other symptom linked to an epileptic condition, or has 
a family history of epilepsy, should contact a health 
care professional before using the 3D function. 

• Avoid using the 3D function when under the 
influence of alcohol. 

• Some individuals may experience health-related 
complications when exposed to certain 3D images. 
Parents should monitor and/or supervise their children's 
use of this 3D technology. If you or your child should 
experience any problem, immediately stop using this 3D 
technology and consult a physician. 

• If you are ill or feel ill, you should refrain from 
viewing 3D images, and consult your health care 
provider as may be appropriate. 

• If you experience any of the following symptoms 
when viewing 3D video images, stop viewing and 
contact your health care provider: 

Convulsions, Eye or muscle twitching, Loss of 
awareness, Altered vision, Involuntary movements, 
Disorientation, Eye Strain, Nausea/Vomiting, 
Dizziness, Headaches, Fatigue. 

• If you feel eye fatigue or other discomfort from 
viewing 3D video images, stop viewing and take a 
rest until the condition improves. 

• Viewing in 3D may cause dizziness and/or 
disorientation for some viewers. 

Therefore, to avoid injury do not place your TV near 
open stairwells, balconies, or wires. 

Also do not sit near objects that could be broken if 
accidentally hit. 

• When viewing 3D images, always wear 3D glasses. 

Watching 3D images without specified 3D glasses 
may cause eye strain. 

• Do not wear 3D glasses or watch 3D images from 
steep angles or while lying down. 

The 3D effect is lost in these conditions and eye 
strain may result. 

• It is recommended that the viewer’s eyes and 3D 
glasses are level with the screen. 

• If you have prescription eye glasses or contact 
lenses, wear the 3D glasses over them. 

Watching 3D images without appropriate eyewear 
may cause eye strain. 

• If 3D images often appear doubled or if you cannot 
see the images in 3D, stop viewing. 

Continuous viewing may cause eye strain. 

• Due to the possible impact on vision development, 
viewers of 3D video images should be age 6 or 
above. 































7 


Children and teenagers may be more susceptible to 
health issues associated with viewing in 3D and 
should be closely supervised to avoid prolonged 
viewing without rest. 

• Watching TV while sitting too close to the screen for 
an extended period of time may cause eye strain. 

• For optimal 3D effect and to avoid eye fatigue it is 
important that you properly select your viewing 
position. 

The best viewing position is at the indicated viewing 
distance with your eyes at the same level as the 
center of the display as shown below. The center of 
the optimum viewing area varies from set to set. The 
usable viewing area is generally over the range 
shown in the table below (actual angle not depicted 
in drawing). 



-Viewing Distance 


Model 

Viewing angle 

Viewing distance 

42L6200U 

Approx. 20 degrees 

Over 62 inches 

47L6200U 

Approx. 20 degrees 

Over 69 inches 

55L6200U 

Approx. 20 degrees 

Over 81 inches 

47L7200U 

Approx. 26 degrees 

Over 69 inches 

55L7200U 

Approx. 26 degrees 

Over 81 inches 


Important: If you see a double image, your eyes are 
either too high or too low in relation to the horizontal 
center of the screen. Adjust your position so that it is 
closer to the center to avoid eye fatigue and to enjoy 
optimum 3D effects. 

FCC Caution 

To assure continued compliance, follow the 
attached installation instructions. Any changes 
or modifications not expressly approved by 
Toshiba America Information Systems, Inc. could 
void the user’s authority to operate this device. 
Service Center or an experienced radio/TV 
technician for help. 


FCC Declaration of Conformity 
Compliance Statement (Part 15): 

Toshiba television models 42L6200U, 47L6200U, 
55L6200U, 47L7200U, and 55L7200U comply with Part 
15 of the FCC Rules. 

Operation is subject to the following two conditions: 

(1) This device may not cause harmful interference, and 

(2) This device must accept any interference received, 
including interference that may cause undesired operation. 
The party responsible for compliance to these rules is: 
Toshiba America Information Systems, Inc. 

9740 Irvine Blvd., Irvine, CA 92618. 

Ph: 800-631-3811 

Note: This equipment has been tested and found to 
comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against 
harmful interference in a residential installation. This 
equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful 
interference to radio communications. However, there 
is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause 
harmful interference to radio or television reception, 
which can be determined by removing and applying 
power to the equipment, the user is encouraged to try 
to correct the interference by one of the following 
measures: 

• Reorient or relocate the receiving antenna. 

• Increase the separation between the equipment and 
receiver. 

• Connect the equipment into an outlet on a circuit different 
from that to which the receiver is connected. 

• Consult the dealer or an experienced radio/TV technician 
for help. 

Caution: Changes or modifications to this equipment 
not expressly approved by Toshiba could void the 
user's authority to operate this equipment. 

Wireless Radio 

For product available in the USA/Canada market, only channel 
1-11 can be operated. Selection of other channels is not possible. 
The device could automatically discontinue transmission in case 
of absence of information to transmit, or operational failure. 
Note that this is not intended to prohibit transmission of control 
or signaling information or the use of repetitive codes where 
required by the technology. If this device is going to be operated 
in 5.15-5.25GHz frequency range, then it is restricted to an 
indoor environment only. 

Important: Any changes or modifications not expressly 
approved by the party responsible for compliance could 
void the useTs authority to operate this equipment. This 
device and its antenna(s) must not be co-located or 
operating in conjunction with any other antenna or 
transmitter. 

















8 


FCC Radiation Exposure Statement: This 
equipment complies with FCC radiation exposure 
limits set forth for an uncontrolled environment. This 
equipment should be installed and operated with 
minimum distance 20cm between the radiator & your 
body. 


Canada - Industry Canada Statement 

This device complies with RSS-210. 

Operation is subject to the following two conditions: 

(1) This device may not cause harmful interference, and 

(2) This device must accept any interference received, 
including interference that may cause undesired operation 
of the device. 

This device and its antenna(s) must not be co-located or 
operating in conjunction with any other antenna or 
transmitter. 

Wireless Radio 

For product available in the USA/Canada market, only 
channel 1-11 can be operated. Selection of other channels is 
not possible. 

The device could automatically discontinue transmission in 
case of absence of information to transmit, or operational 
failure. Note that this is not intended to prohibit 
transmission of control or signaling information or the use 
of repetitive codes where required by the technology. 
Important: Any changes or modifications not 
expressly approved by the party responsible for 
compliance could void the user's authority to operate 
this equipment. 

IMPORTANT NOTE: 

1C Radiation Exposure Statement: This equipment 
complies with 1C RSS-102 radiation exposure limits 
set forth for an uncontrolled environment. This 
equipment should be installed and operated with 
minimum distance 20cm between the radiator & your 
body. 


ENERGY STAR® User Information 

ENERGY STAR User Information Statement: the factory 
default settings of this television meet ENERGY STAR® 
requirements. Changing Picture Settings may increase 
energy consumption, possibly beyond the limits required 
for ENERGY STAR qualification. 

To ensure your television is operating at optimal energy 
efficiency, select [Home] mode during initial activation. To 
return to [Home] mode settings, select [Standard] picture 
mode. [Standard] mode is recommended for normal home 
use. 


^— ENERGY STAR® qualified TV. Products 
that earn the ENERGY STAR prevent 
jjjS/ygi green house gas emissions by meeting 
strict guidelines set by the U.S. 

R il VArlLJ Environmental Protection Agency. 

ENERGY STAR and the ENERGY STAR 
mark are registered U.S. marks. 


Important notes about your TV 

The following symptoms are technical limitations of 
LCD Display technology and are not an indication of 
malfunction; therefore, Toshiba is not responsible for 
perceived issues resulting from these symptoms. 

1) An afterimage (ghost) may appear on the screen if 
a fixed, non-moving image appears for a long 
period of time. The afterimage is not permanent 
and will disappear in a short period of time. 

2) The LCD panel contained in this TV is 
manufactured using an extremely high level of 
precision technology; however, there may be an 
occasional pixel (dot of light) that does not operate 
properly (does not light, remains constantly lit, 
etc.). This is a structural property of LCD 
technology, is not a sign of malfunction, and is not 
covered under your warranty. Such pixels are not 
visible when the picture is viewed from a normal 
viewing distance. 

Note: Interactive video games that involve shooting a 
“gun” type of joystick at an on-screen target may not 
work with this TV. 









9 


Trademark Information 

• Cinema Series, ClearScan, ColorStream, Dynalight, 
GameTimer, Native Mode, Surflock, and Trivector are 
trademarks or registered trademarks of Toshiba America 
Information Systems, Inc. and/or Toshiba Corporation. 

• Android is a trademark of Google Inc. 


. Audyssey EQ® provides clear, accurate 
and natural sound right out of the box. This 
technology ensures you enjoy your audio experience as 
much as your video. 

• Audyssey ABX™ technology uses 
ABX sophisticated driver analysis and low 

frequency monitoring to extend the range and bass of 
small speakers. This enables the system to produce 
lower frequencies than would be possible with a 
traditional system of the same size. 

• Audyssey Dynamic Volume® 

dynam.c volume automatically adjusts volume to provide a 
consistent sound level between television programs, 
commercials, and between the loud and soft passages of 
movies. 

GEESTS • Audyssey Volume Extension™ doubles 
volume extension v0 | ume capability in small speakers 

while blocking distortion, so your TV gets loud and still 
sounds great. 

• Audyssey Premium Television™ is a suite 

premium TELEV.S.ON ^ t ec h n0 | 0 gj es re move the acoustical 

problems caused by small speakers and drivers. 
Working together these technologies deliver a better 
translation of the audio content and make the television 
experience sound closer to the original. 

• Manufactured under license from Audyssey 
Laboratories, Inc. U.S. and foreign patents pending. 
Audyssey EQ®, Audyssey ABX™, Audyssey Dynamic 
Volume®, Audyssey Volume Extension™, and 
Audyssey Premium Television™ are registered and 
licensed trademarks of Audyssey Laboratories, Inc. 

• Blu-ray Disc™, Blu-ray™, and the logos are trademarks 
of the Blu-ray Disc Association 

• CinemaNow is a registered trademark of Best Buy, Inc. 

• ENERGY STAR and the ENERGY STAR mark are 
registered U.S. marks. 

d] DOLBY . Manufactured under license from Dolby 
(mgitalpuis Laboratories. Dolby and the double-D 
symbol are trademarks of Dolby Laboratories. 

powe red • www.espial.com 

^9BuZ3l 

• HDMI, the HDMI Logo, and High-Definition Multimedia 
Interface are trademarks or registered trademarks of 
HDMI Licensing LLC in the United States and other 
countries. 

• MPEG Layer-3 audio coding technology licensed from 
Fraunhofer IIS and Thomson. 

• Netflix is a registered trademark of Netflix, Inc. 


pow e »dbyrow • Rovi is a trademark of Rovi Corporation 
and/or its subsidiaries. The Rovi Guide 
system is manufactured under license from Rovi 
Corporation and/or its subsidiaries. 

• VUDU, Vudu Apps, and Vudu Movies are licensed and 
registered trademarks of VUDU, Inc 

• YouTube is a registered trademark of Google, Inc. 

ujEi • Designed with UEI Technology™. Under 

License from Universal Electronics inc. 
Portions ©UEI 2000-2012. 

• THIS PRODUCT IS LICENSED UNDER THE AVC 
PATENT PORTFOLIO LICENSE FOR THE PERSONAL 
AND NONCOMMERCIAL USE OF A CONSUMER TO 
(i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC 
STANDARD 

(“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO 
THAT WAS ENCODED BY A CONSUMER ENGAGED 
IN A PERSONAL AND NON-COMMERCIAL ACTIVITY 
AND/OR WAS OBTAINED FROM A VIDEO PROVIDER 
LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS 
GRANTED OR SHALL BE IMPLIED FOR ANY OTHER 
USE. ADDITIONAL INFORMATION MAY BE 
OBTAINED FROM MPEG LA, LLC. SEE HTTP:// 
WWW.MPEGLA.COM 

• THIS PRODUCT IS LICENSED UNDER THE VC-1 
PATENT PORTFOLIO LICENSE FOR THE PERSONAL 
AND NONCOMMERCIAL USE OF A CONSUMER TO 
(i) ENCODE VIDEO IN COMPLIANCE WITH THE VC-1 
STANDARD 

(“VC-1 VIDEO”) AND/OR (ii) DECODE VC-1 VIDEO 
THAT WAS ENCODED BY A CONSUMER ENGAGED 
IN A PERSONAL AND NON-COMMERCIAL ACTIVITY 
AND/OR WAS OBTAINED FROM A VIDEO PROVIDER 
LICENSED TO PROVIDE VC-1 VIDEO. NO LICENSE 
IS GRANTED OR SHALL BE IMPLIED FOR ANY 
OTHER USE. ADDITIONAL INFORMATION MAY BE 
OBTAINED FROM MPEG LA, LLC. SEE HTTP:// 
WWW.MPEGLA.COM 

• THIS PRODUCT IS LICENSED UNDER THE MPEG-4 
VISUAL PATENT PORTFOLIO LICENSE FOR THE 
PERSONAL AND NON-COMMERCIAL USE OF A 
CONSUMER FOR (i) ENCODING VIDEO IN 
COMPLIANCE WITH THE MPEG-4 VISUAL 
STANDARD (“MPEG-4 VIDEO”) AND/OR (ii) 
DECODING MPEG4 VIDEO THAT WAS ENCODED 
BY A CONSUMER ENGAGED IN A PERSONAL AND 
NON-COMMERCIAL ACTIVITY AND/OR WAS 
OBTAINED FROM A VIDEO PROVIDER LICENSED 
BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO 
LICENSE IS GRANTED OR SHALL BE IMPLIED FOR 
ANY OTHER USE. ADDITIONAL INFORMATION 
INCLUDING THAT RELATING TO 
PROMOTIONAL,INTERNAL AND COMMERCIAL 
USES AND LICENSING MAY BE OBTAINED FROM 
MPEG LA,LLC. SEE http://WWW.MPEGLA.COM 














10 


Copyright 

This guide is copyrighted by Toshiba America Information 
Systems, Inc. with all rights reserved. Under the copyright 
laws, this guide cannot be reproduced in any form without 
the prior written permission of Toshiba. No patent liability 
is assumed, however, with respect to the use of the 
information contained herein. 

©2012 by Toshiba America Information Systems, Inc. All 
rights reserved. 


Notice 

The information contained in this manual, including but not 
limited to any product specifications, is subject to change 
without notice. 

TOSHIBA CORPORATION AND TOSHIBA 
AMERICA INFORMATION SYSTEMS, INC. 
(TOSHIBA) PROVIDES NO WARRANTY WITH 
REGARD TO THIS MANUAL OR ANY OTHER 
INFORMATION CONTAINED HEREIN AND 
HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED 
WARRANTIES OF MERCHANTABILITY OR 
FITNESS FOR ANY PARTICULAR PURPOSE WITH 
REGARD TO ANY OF THE FOREGOING. TOSHIBA 
ASSUMES NO LIABILITY FOR ANY DAMAGES 
INCURRED DIRECTLY OR INDIRECTLY FROM 
ANY TECHNICAL OR TYPOGRAPHICAL ERRORS 
OR OMISSIONS CONTAINED HEREIN OR FOR 
DISCREPANCIES BETWEEN THE PRODUCT AND 
THE MANUAL. IN NO EVENT SHALL TOSHIBA BE 
LIABLE FOR ANY INCIDENTAL, 
CONSEQUENTIAL, SPECIAL, OR EXEMPLARY 
DAMAGES, WHETHER BASED ON TORT, 
CONTRACT OR OTHERWISE, ARISING OUT OF 
OR IN CONNECTION WITH THIS MANUAL OR 
ANY OTHER INFORMATION CONTAINED 
HEREIN OR THE USE THEREOF. 





Contents 

Chapter 1: Introduction.20 

Features.21 

Overview of installation, setup, and use.22 

TV front and side panel controls and connections ..23 

Front panel.23 

Left side.23 

TV back panel controls and connections.24 

Back panel controls.25 

Back panel connections.25 

Chapter 2: Connecting Your TV.27 

Overview of cable types.27 

Coaxial cable (F-type).27 

Standard A/V cables (red/white/yellow).27 

Component video cables (red/green/blue).28 

HDMI® cable (with HDMI Logo).28 

Dual-wand IR blaster cable.29 

Optical audio cable.29 

Analog RGB (15-pin) computer cable.29 

3.5mm Stereo to RCA Y-cable.29 


11 




















12 


Contents 


LAN cable.30 

About the connection illustrations.30 

Connecting an antenna, satellite receiver, and 

cable TV box.30 

Connecting DVD to ColorStream® or VCR to 

composite video.31 

Connecting remote IR devices.33 

Using the IR blaster OUT terminal.33 

Connecting a digital audio system.35 

Connecting an HDMI® or DVI device to the 

HDMI® input.36 

Using the TV remote and HDMI® CEC Control to 

control other devices.38 

Connecting an HDMI® audio system.39 

Connecting a computer.39 

Connecting a computer to the TV’s PC IN 

terminal:.40 

Connect a computer to the TV’s HDMI® 

terminal.41 

Connecting to a home network.42 

Connecting the TV directly to a computer 

without an Internet connection.43 

Connecting the TV to a home network 

without an Internet connection.43 

Connecting the TV to a home network with an 

Internet connection - wired.44 

Connecting the TV to a home network with an 
Internet connection - wireless.44 

Chapter 3: Using the Remote Control.46 

Controlling other devices.46 

Installing batteries.46 

Remote control effective range.48 

Learning about the remote control.49 

Chapter 4: Initial Setup and Menu.51 


























Contents 


13 


Initial setup.51 

Performing the initial setup.52 

IR Blaster Setup.55 

Network Setup.58 

MediaGuide Setup.59 

Navigating the menu system.61 

Main menu layout.62 

Quick Menu.63 

Chapter 5: Setting up your TV.64 

How to navigate the menu.64 

Changing initial settings.64 

Individual settings.65 

Storing channels in memory (optional).66 

Skipping channels.68 

Skipping video inputs.68 

Labeling analog TV channels.69 

Labeling video inputs.70 

Configuring shared inputs.70 

Setting the Auto Input feature.70 

Chapter 6: Basic features.72 

Viewing 3D images.72 

Using 3D functions.74 

Switching display mode or selecting 3D 

format.76 

The 3D button operation.76 

Switching to 3D mode.77 

Selecting 3D format from the Quick menu 

in 3D mode.78 

Switching to 2D mode.79 

Selecting 2D format from the Quick menu 

in 2D mode.79 

Switching to Native mode.80 

Setting the auto start mode.81 

Setting the 3D PIN code.81 

































14 


Contents 


Enter a new PIN code. 

Change or delete your PIN code. 

Forgotten PIN codes. 

Setting the 3D start message. 

Setting the 3D Lock. 

Setting the 3D Timer Lock. 

Setting the Enable 3D Timer. 

Displaying 3D Important Information. 

Adjusting 2D to 3D depth. 

Switching left and right images. 

Tuning Channels. 

Tuning to the next programmed channel. 

Tuning to a specific channel (programmed or 

unprogrammed). 

Using Channel Return. 

Using SurfLock™. 

Selecting the video input to view. 

Using closed captions. 

Analog CC mode. 

Digital CC settings. 

Setting the PIN code. 

Entering a new PIN code. 

Changing or deleting your PIN code. 

Forgotten PIN code. 

Using parental controls. 

Blocking TV programs and movies by 

rating (V-Chip). 

Downloading an additional rating system. 

Displaying ratings. 

Unlocking programs. 

Locking specific channels. 

Locking video inputs. 

Setting a time limit for games. 

Locking the control panel. 

Using HDMI®CEC Control. 

Controlling HDMI® CEC playback devices. 


CD CO CD CD CD CD CD CD CD CD COCOCOCOCOOOOOOOOOOOOOOO OOOOOOOOOOOOOOOOOOOOOOOO 




































Contents 


15 

HDMI® CEC Control input source selection.100 

Adjusting the amplifier’s audio.100 

Other HDMI® CEC Control functions.101 

Using the HDMI® RGB Range feature.101 

Viewing the HDMI® signal information.102 

Using your computer with the TV.102 

Adjusting the image.102 

Setting the computer audio.103 

Setting the timer to turn on the TV.104 

Setting the sleep timer.105 

Setting No Signal Power Down.106 

Displaying TV status information.106 

Viewing support information.107 

Resetting to Factory Defaults.107 

Power failure.108 

Chapter 7: Picture and Sound Controls.109 

Selecting the picture size.109 

Native.110 

4:3.Ill 

Full.Ill 

TheaterWide 1.112 

TheaterWide 2.112 

TheaterWide 3.112 

Normal.113 

Dot by Dot.113 

Scrolling the picture.113 

Using the Auto Aspect feature.114 

Using the 4:3 Stretch.114 

Adjusting the picture.115 

Selecting the picture mode.115 

Adjusting the picture quality.115 

Using the advanced picture settings features.117 

Edge Enhancer.117 

Dynamic Contrast.117 

DynaLight®.118 





































16 


Contents 


Static Gamma.118 

ClearScan®.118 

Cinema Mode.119 

MPEG NR.119 

DNR.119 

Auto Brightness Sensor.120 

Backlight Adjustment Pro.120 

ColorMaster™.121 

Base Color Adjustment.121 

Color temperature.122 

Resetting to the factory default.122 

Setting the expert picture settings.122 

Test Pattern.122 

RGB Filter.123 

White Balance.123 

Locking the picture settings.124 

Adjusting the audio.125 

Muting the sound.125 

Selecting stereo/SAP broadcasts.125 

Adjusting the audio balance.125 

Adjusting the range.126 

Selecting the optical audio output format.126 

Using the Dolby® Digital Dynamic Range 

Control feature.126 

Audyssey Premium Television™.127 

Using Audyssey EQ® for Wall Mounted or 

Table-top TVs.127 

Using Audyssey Dynamic Volume ®.127 

Audyssey ABX™.128 

Using the surround sound feature.128 

Chapter 8: Advanced features.129 

Using your home network.129 

When using a Wireless network connection: ..130 

Setting up the Network.131 

Wireless Setup.131 


































Contents 


17 


Advanced Network Setup.136 

DNS Setup.137 

Network Connection Test.139 

Using the software keyboard.139 

Enter text using the keypad.139 

Enter text using the full keyboard.139 

Performing a Software Upgrade.140 

Viewing the Software Licenses.141 

Using the SmartTV features.142 

eMANUAL.142 

ePORTAL page.142 

ePORTAL SearchAII.142 

ePORTAL Apps.144 

Netflix®.144 

VUDU™.145 

YouTube™.146 

CinemaNow®.147 

ePORTAL Internet.147 

ePORTAL Messages.151 

ePORTAL Events.151 

ePORTAL Favorite Sites.152 

Edit ePORTAL Favorites.152 

ePORTAL Preferences.153 

MediaGuide.153 

ePORTAL MediaShare (Videos, Music, and 

Photos).157 

MediaShare (Media Player) specifications.157 

Basic operation.158 

Viewing movie files.160 

Playing music files.162 

Viewing photo files.164 

Search.167 

Network Device Setup.167 

External Control Setup.167 

Setting up the Media Renderer feature.168 

Apps Control Profile.171 





































18 


Contents 


Toshiba A/V Remote App.171 

Initial setup.172 

Controlling devices.173 

Mouse control.175 

Touchpad control.176 

Combo.176 

Toshiba MediaGuide app.177 

Toshiba Send & Play App.178 

Launching the app.179 

Text input.180 

Chapter 9: Troubleshooting.181 

General troubleshooting.181 

Picture problems.182 

Sound problems.184 

Remote control problems.184 

Channel tuning problems.184 

Closed caption problems.185 

Rating blocking (V-Chip) problems.185 

HDMI® CEC Control operation.185 

HDMI® problems.186 

Network problems.186 

Wireless network problems.188 

MediaShare (Media Player) problems.188 

Light Indicator .189 

Power On/Standby light.189 

If the problem persists after trying the solutions ..190 

Appendix A: Specifications.191 

Television system.191 

Channel coverage.191 

Power source.192 

Power consumption.192 

Audio power.192 

Speaker type.192 

Video/audio terminals.193 



































Contents 


19 


Video/audio input.193 

ColorStream® (component video) HD input...193 

HDMI® input.193 

Digital audio output.193 

PC input.193 

Wireless connection.193 

Ethernet.194 

USB.194 

Dimensions (include foot stand).194 

Mass (weight).194 

Operating conditions.194 

Supplied accessories.195 

Acceptable signal formats for PC IN, HDMI®, 

and 3D.195 

PC IN signal formats.195 

HDMI® signal formats.196 

3D Signal formats*.198 

Operating the TV with combination buttons.199 

. 201 


Index. 



















Chapter 1 


Introduction 


Safety icons 

This manual contains safety instructions that must be observed to avoid potential 
hazards that could result in personal injuries, damage to your equipment, or loss 
of data. These safety cautions have been classified according to the seriousness of 
the risk, and icons highlight these instructions as follows: 


A DANGER 


Indicates an imminently hazardous situation which, if not avoided, will result 
in death or serious injury. 


iBBBittlMma Indicates a potentially hazardous situation which, if not avoided, could result 
in death or serious injury. 


acaut i on Indicates a potentially hazardous situation which, if not avoided, may result 
in minor or moderate injury. 


caution Indicates a potentially hazardous situation which, if not avoided, may result 
in property damage. 


NOTE Provides important information. 


20 












Introduction 

Features 


21 


Features 

❖ Integrated digital tuning (8VSB ATSC and QAM)— 

Eliminates the need for a separate digital converter set-top box 
(in most cases). 

❖ 1920 x 1080 output resolution. 

❖ Four HDMI®—Digital, High-Definition Multimedia 
Interfaces with 1080p input support 

❖ HDMI® capabilities 

ARC (Audio Return Channel)—Enables the audio signal of 
the TV to be sent to an AV amplifier via an HDMI® cable. 

RGB Range—Adjusts RGB full range signal automatically. 

❖ HDMI® CEC Control—Allows control of external devices 
from the TV remote via HDMI® connection 

❖ ColorStream® HD—High-resolution component video input. 

❖ Digital Audio Out—Optical audio connection with Dolby® 
Digital optical output format, see “Connecting a digital audio 
system” on page 35. 

❖ PC IN (Analog RGB)—Computer terminal, see “Connecting 
a computer” on page 39. 

❖ IR Blaster Out— Controls infrared remote controlled devices 
from the TV. 

❖ Built-in WLAN—Allows the television to access your home 
wireless network without an external Dual Band WLAN 
Adapter. 

❖ ColorMaster™—Allows you to adjust the TV’s standard 
colors, see “ColorMaster™” on page 121. 

❖ ClearScan® —Provides picture clarity for fast motion video 
using new Backlight Scanning technology. 

❖ AutoView®—Allows you to automatically adjust picture 
settings based on ambient light conditions and input signal 
content, see “ENERGY STAR® User Information” on page 8. 

❖ Dynamic Volume (Audyssey Dynamic Volume®)— 

Eliminates inconsistent TV volume when changing channels or 
viewing commercials, see “Audyssey Premium Television™” 
on page 127. 

❖ MediaShare (Media Player)—Allows you to view photo files 
and play music or movie files, see “ePORTAL MediaShare 
(Videos, Music, and Photos)” on page 157. 


22 


Introduction 

Overview of installation, setup, and use 


❖ 3D capability—Allows you to view and experience 3D 
content on the television while using special glasses. 

❖ ENERGY STAR® qualified 

Overview of installation, setup, and use 

Follow these steps to set up your TV and begin using its many 
exciting features. 

1 Carefully read the important safety, installation, care, and 
service information. Keep this manual for future reference. 

2 To choose a location for the TV: 

❖ Read "Important notes about your TV” on page 8. 

❖ Place the TV on the floor or a sturdy, level, stable surface 
that can support the weight of the unit. Secure the TV to a 
wall, pillar, or other immovable structure, see 24) on 
page 4. 

❖ Place the TV in a location where light does not reflect on 
the screen. 

❖ Place the TV far enough from walls and other objects to 
allow proper ventilation. Inadequate ventilation may cause 
overheating, which will damage the TV. THIS TYPE OF 
DAMAGE IS NOT COVERED UNDER THE TOSHIBA 
WARRANTY. 

3 Do not plug in any power cords until after you have connected 
all cables and devices to your TV. 

4 Before connecting cables or devices to the TV, learn the 
functions of the TV’s connections and controls, see “Overview 
of cable types” on page 27. 

5 Connect your other electronic device(s) to the TV, see 
“Connecting Your TV” on page 27. 

6 Install the batteries in the remote control, see “Installing 
batteries” on page 46 

7 See “Using the Remote Control” on page 46 for an overview of 
the buttons on the remote control. 

8 After connecting all cables and devices, plug in the power 
cords for your TV and other devices. Then press the POWER 
button on the TV control panel or remote control to turn on the 
TV. If the TV stops responding to the buttons on the remote 
control or TV control panel and you cannot turn the TV off or 




Introduction 

TV front and side panel controls and connections 


23 


on, unplug the power cords for a few seconds and then plug 
them in and try again. 

9 See “Navigating the menu system” on page 61 for a quick 
overview of navigating the TV’s menu system. 

10 Program channels into the TV’s channel memory, see “Auto 
Tuning” on page 66. 

11 For details on using the TV’s features, see chapters 6, 7, and 8. 

12 For help, refer to “Troubleshooting” on page 181. 

13 For technical specifications, see “Specifications” on page 191. 

TV front and side panel controls and connections 




(Sample Illustration) L6200U/L7200U Series front and side panel 

controls and connections 

Front panel 

1 Power On/Standby LED —Power indicator light, (glows 
green when the TV power is On). 

2 Brightness Sensor —This sensor detects the ambient light 
conditions to optimize the backlighting levels, see “Auto 
Brightness Sensor” on page 120. 

3 Remote Sensor —Point the remote control toward this remote 
sensor, see “Remote control effective range” on page 48. 

Left side 

4 2 LTSB Ports —Used to access video, music, or photo files with 
USB device. 









24 


introduction 

TV back panel controls and connections 


5 IR Blaster OUT —Used to connect and control infrared 
remote-controlled devices. 

6 Digital Audio Jack —Optical audio output in Dolby® Digital 
or PCM (pulse-code modulation) format for connecting an 
external Dolby® Digital decoder, amplifier, A/V receiver, or 
home theater system with optical audio input. 

7 Analog Audio Port —Analog audio outputs for connecting an 
audio amplifier. 

8 3 HDMI Ports —High-Definition Multimedia Interface input 
receives digital audio and uncompressed digital video from an 
HDMI® device or uncompressed digital video from a DVI 
device. HDMI® connection is necessary to receive 1080p 
signals. 

TV back panel controls and connections 

For explanations of cable types and connections, see “Connecting 

Your TV” on page 27. 


□ 



t ■ 



iTCW, 



ess** 

ft 


ColorStream® HD-i 

I 

PC/HDMI® IN- 

PC IN J 


LAN- 




Video 2 IN 
Video 




•Tt 

1 IN J L . 


Channel Up 
Channel Down 
Volume Up 
Volume Down 
Menu button -j-j-i 

1 

Input button -j-j-i 


Ur- 


IR Blaster OUT 

S|1 -Digital Audio OUT 

?fS «a- —Analog Audio OUT 

Iffl 


-■—ARC HDMI® only port 


-HDMI® IN ports 


Antenna/Cable 


(Sample Illustration) L6200U/L7200U Series back panel controls 
and connections 


















































Introduction 

TV back panel controls and connections 


25 


Back panel controls 

1 POWER —Turns the TV On and Off. 

2 VOL +-Adjusts the volume level. When an onscreen menu 

appears, these keys function as menu navigation 

buttons. 

3 CH Up/Down arrow buttons —Changes the channel. When 
an onscreen menu appears, these buttons function as (A/T) 
menu navigation buttons. 

4 MENU —Accesses the menu. When an onscreen menu 
appears, the MENU button on the TV’s control panel functions 
as the BACK button. 

5 INPUT —Changes the source you are viewing. When an 
onscreen menu appears, the INPUT button on the TV’s control 
panel functions as the OK button. 

Back panel connections 

6 LAN IN —Connects the TV to your home network. 

7 PC/ColorStream HD2 IN —For use when connecting a 
personal computer. 

8 PC/HDMI-4 (Audio) IN —PC audio input terminals are 
shared with HDMI®-4 analog audio input terminals, and their 
use can be configured in the Configuring shared inputs menu, 
see “Configuring shared inputs” on page 70. 

9 ColorStream® HD1 IN —These include standard A/V 
connections, see “Connecting DVD to ColorStream® or VCR 
to composite video” on page 31 . 

10 Video 2 IN —Video input. 

11 Video 1 IN —Video input. 

12 ANT/CABLE —Antenna input that supports analog (NTSC) 
and digital (ATSC) off-air antenna signals and analog and 
digital Cable TV (QAM) signals. 

13 HDMI® IN —High-Definition Multimedia Interface input 
receives digital audio and uncompressed digital video from an 
HDMI® device or uncompressed digital video from a DVI 
device. HDMI® connection is necessary to receive 1080p 
signals. 

14 ARC HDMI® only port— Audio Return Channel (ARC) 
enables the audio signal of the TV to be sent to an AV 
amplifier via the HDMI cable. 


26 


Introduction 

TV back panel controls and connections 


15 Analog Audio OUT —Analog audio outputs for connecting an 
audio amplifier. 

16 Digital Audio OUT —Optical audio output in Dolby® Digital 
or PCM (pulse-code modulation) format for connecting an 
external Dolby® Digital decoder, amplifier, A/V receiver, or 
home theater system with optical audio input. 

17 IR Blaster OUT —Used to connect and control infrared 
remote controlled devices. 

18 2 USB ports —To access video, music, or photo files with 
USB device. 


N ot E Component/Standard (composite) video cables carry only video 
information; separate audio cables are required. 



Chapter 2 


Connecting Your TV 


Overview of cable types 


Before purchasing cables, know the connector types your devices 
require. You can purchase cables from most stores that sell 
audio/video devices. 


Coaxial cable (F-type) 



m cdo 


(Sample Illustration) Coaxial cable 

Coaxial (F-type) cable connects your antenna, cable TV service, 
and/or cable converter box to the ANT/CABLE input on your TV. 


Standard A N cables (red/white/yellow) 



(Sample Illustration) Standard AVcables 

Standard A/V cables (composite video) usually come in sets of 
three, and connects to video devices with analog audio and 
composite video output. These cables (and the related inputs on 
your TV) are typically color-coded according to use: yellow for 


27 





Connecting Your TV 

Overview’ of cable types 


video, red for stereo right audio, and white for stereo left (or mono) 
audio. 

Component video cables (red/green/blue) 



(Sample Illustration) Component video cables 

Component video cables come in sets of three and are for use with 
video devices with component video output. (ColorStream® is 
Toshiba’s brand of component video.) These cables are typically 
color-coded red, green, and blue. Separate audio cables are required 
for a complete connection. 


N ot E Component video cables provide better picture quality than 
composite video cables. 


HDMI® cable (with HDMI Logo) 



(Sample Illustration) HDMI® cable 


HDMI® (High-Definition Multimedia Interface) cable connects to 
devices that have an HDMI® output. An HDMI® cable delivers 
digital audio and video in its native format. Separate audio cables 
are not required, see “Connect a computer to the TV’s HDMI® 
terminal” on page 41. 


HDMI® cables provide the best audio and picture quality. 


NOTE 













Connecting Your TV 

Overview of cable types 



Dual-wand IR blaster cable 

Connect the dual-wand IR blaster cable to the IR blaster terminal to 
control infrared remote controlled devices from the TV. 


Optical audio cable 


(Sample Illustration) Optical audio cable 

Optical audio cable connects receivers with Dolby® Digital or PCM 
(pulse-code modulation) optical audio input to the TV’s Digital 
Audio Out terminal, see “Connecting a digital audio system” on 
page 35. 


□ c j=l i Sifr 


Analog RGB (15-pin) computer cable 



(Sample Illustration) Analog RGB ( 15-pin) computer cable 


Analog RGB (15-pin) computer cable connects a computer to the to 
the TV’s PC IN terminal, see “Connecting a computer to the TV’s 
PC IN terminal:” on page 40. 


note Separate audio cables are required. 

3.5mm Stereo to RCA Y-cable 



(Sample Illustration) 3.5mm Stereo to RCA Y- cable 

3.5mm Stereo to RCA Y-cable connects an audio signal from DVI 
device to TV. 

LAN cable 

a a 

(Sample Illustration) LAN cable 

Standard LAN cable connects the TV to your home network, see 
“Connecting the TV to a home network with an Internet connection 
- wired” on page 44. 



























30 


Connecting Your TV 

Connecting an antenna, satellite receiver, and cable TV box 


Crossover LAN cable connects the TV directly to a computer, see 
“Connecting the TV directly to a computer without an Internet 
connection” on page 43. 

About the connection illustrations 

You can connect different types and brands of devices to your TV 
in several different configurations. The connection illustrations in 
this manual are representative of typical device connections only. 
The input/output terminals on your devices may differ from those 
illustrated herein. For details on connecting and using your specific 
devices, refer to each device’s owner’s manual. 

Connecting an antenna, satellite receiver, and cable TV box 



(Sample Illustration) L6200U/L7200U Series—Connecting to an 
antenna, satellite receiver, and cable TV box 


Items needed: 

❖ Coaxial cables 

❖ Standard AV cables 

❖ Component video cables (red/green/blue) 

N ot E When you use a cable box, you may not be able to use the remote 

control to program or access certain features on the TV. 

To view the antenna or cable signal: 

Select ANT/CABLE video input source on the TV.* 

To view basic and premium cable channels: 

Select the ANT/CABLE video input source on the TV.* Tune the 
TV to channel 3 or 4 (whichever channel the cable box output is set 
to). Use the cable box controls to change channels. 

































Connecting Your TV 

Connecting DVD to ColorStream' or VCR to composite video 



To view the VCR or camcorder video: 

Turn On the VCR or camcorder video. Select VIDEO input source 
on the TV.* 

*To select the video input source, press the INPUT button on the 
remote control, see "Selecting the video input to view” on page 86. 


note The unauthorized recording, use, distribution, or revision of 
television programs, videotapes, DVDs, and other materials is 
prohibited under the Copyright Laws of the United States and other 
countries, and may subject you to civil and criminal liability. 


Connecting DVD to ColorStream® or VCR to composite video 



(Sample Illustration) L6200U/L7200U Series—Connecting a DVD 

with ColorStream ® or a VCR with composite video 

Items needed: 

❖ Coaxial cables 

❖ Standard AV cables 

❖ Standard audio cables 

❖ Composite or component video cables 

❖ You can connect the component video cables (plus audio 
cables) from the DVD player or satellite receiver to the 
COLOR STREAM HD terminal in the TV. The COLOR 
STREAM HD terminal can be used to display Progressive 
(480p, 720p) and Interlaced (480i, 1080i) scan systems. 
Note that 1080p is not supported. Check the User’s Guide 
of the DVD player in order to determine the best output 
signal available. 

































Connecting Your TV 

Connecting remote IR devices 

If your DVD player or satellite receiver does not have 
component video, connect a standard A/V cable to the 
AUDIO/VIDEO terminal. If your DVD player has HDMI‘ 
video, see “Connecting an HDMI® or DVI device to the 
HDMI® input” on page 36. 


N OT E When you use ColorStream® HD or Video, please switch to the 
appropriate AV mode. 

To view antenna or Cable channels: 

Select the ANT/CABLE video input source on the TV.* 

To view the DVD player: 

Turn ON the DVD player. Select the ColorStream® HD video 
input source on the TV.* 

To view satellite programs using the component video 
connections: 

Turn ON the satellite receiver. Select the ColorStream® HD video 
input source on the TV.* 

To view the VCR or view and record antenna channels: 

Turn ON the VCR. Tune the VCR to the channel you want to 
watch. Select the VIDEO video input source on the TV.* 

To record a TV program while watching a DVD: 

Turn ON the VCR. Tune the VCR to the channel to record. Select 
the ColorStream® HD video input source on the TV* to view the 
DVD. 

*To select the video input source, press the INPUT button on the 
remote control, see “Selecting the video input to view” on page 86. 


N ot E The unauthorized recording, use, distribution, or revision of 
television programs, videotapes, DVDs, and other materials is 
prohibited under the Copyright Laws of the United States and other 
countries, and may subject you to civil and criminal liability. 

Connecting remote IR devices 

Using the IR blaster OUT terminal 

You can use the TV’s IR OUT terminal to remotely operate many 
infrared remote-controlled devices enclosed in an entertainment 
center or similar cabinet. 


Items needed: 




Connecting Your TV 

Comiecting remote IR devices 



❖ Dual-wand IR blaster cable (see “Dual-wand IR blaster cable” 
on page 29) 

❖ Other cables as required to connect the device(s) to the TV (see 
“Overview of cable types” on page 27) 

See the remote IR blaster setup section. 

To connect the IR blaster cable: 

1 Locate the infrared sensor on the front of your device. This 
sensor is marked on some devices.If you are having issues 
locating the device's infrared sensor, see “If you cannot locate 
the device’s infrared sensor:” on page 35. 

2 Align one of the IR blaster cable’s wands approximately 1 inch 
away from the infrared sensor on the front of the device and 
attach it using double-sided mounting tape. If you have a 
second device, attach the second wand in a similar manner. 


note If you do not have a second device, coil the second wand with a 
rubber band and leave it behind the TV. 


3 Plug the IR blaster cable’s plug into the TV’s IR Blaster Out 
terminal. 


Front of IR-controlled DVD player (for example) 



Dual¬ 
wand IR 
blaster 
cable 


(Sample Illustration) L6200U/L7200U Series—Using the IR blaster 
OUT terminal 


To control the device(s): 

































Connecting Your TV 

Connecting a digital audio system 


Point the TV remote control toward the front of the TV and press 
the button for the desired function. The signal passes from the 
remote control through the TV to the device via the IR Blaster 
cable. For more information, see “IR Blaster Setup” on page 55. 



(Sample Illustration) Controlling the device(s) - remote control 


N ot E The IR pass-through feature does not support all IR controlled 
devices. Satisfactory quality may not be attainable with certain 
devices. 

If you cannot locate the device’s infrared sensor: 

1 Turn off the device. 

2 Starting at the device’s lower-left corner, place the end of the 
device’s remote control (with the infrared emitter) so it touches 
the front of the device. Press the POWER button. 

(Do not use the TV’s remote control for this step.) 

3 If the device turns on, the sensor is located where the remote 
control touched the device. 

4 If the device does not turn on, move the remote control slightly 
to the right and press the POWER button again. 

5 Repeat the previous steps if necessary. 

Connecting a digital audio system 

The TV’s Digital Audio Out terminal outputs a Dolby® Digital or 
2-channel down-mixed PCM (pulse-code modulation) signal for 














Connecting Your TV 

Connecting an HDMI® or DVI de\>ice to the HDMI® input 



use with an external Dolby Digital decoder or other external audio 
system with optical audio input. 

You will need an Optical audio cable (Use an optical audio cable 
that has the larger “TosLink” connector and not the smaller 
“mini-optical” connector.) 



Optical audio 
cable 


(Sample Illustration) L6200U/L7200U Series—Connecting a 
digital audio system 


Before controlling the audio, see “Selecting the optical audio 
output format” on page 126. 


note Some audio systems may not be compatible with Dolby Digital 

bitstream signals. Older audio systems that are not compatible with 
standard optical out signals may not work properly, creating a high 
noise level that may damage speakers or headphones. THIS 
DAMAGE IS NOT COVERED BY YOUR WARRANTY. 

The DIGITAL AUDIO OUT terminal may not output some digital audio 
sources because of copy restrictions. 

The Dolby Digital format is available in the following situations: 

❖ When tuned to a digital RF channel 

❖ When an HDMI input is used 

❖ When DLNA Certified products are used 


Connecting an HDMI® or DVI device to the HDMI® input 

The HDMI® input on your TV receives digital audio and 
uncompressed digital video from an HDMI® source device, or 























Connecting Your TV 

Connecting an HDMI® or DVI device to the HDMI® input 


uncompressed digital video from a DVI (Digital Visual Interface) 
source device. 

This input is designed to accept HDCP (High- Bandwidth 
Digital-Content Protection) program material in digital form from 
EIA/CEA-861-D- compliant[l] consumer electronic devices (such 
as a set-top box or DVD player with HDMI® or DVI output). 

The HDMI® input can accept and display VGA, SVGA, XGA, 
WXGA, SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 1080i 
(60Hz), and 1080p (24Hz/60Hz) signal formats. For detailed signal 
specifications, see “HDMI® signal formats” on page 196. 

The supported Audio formats are Linear PCM and Dolby® Digital, 
sampling rate 32/44.1/ 48 kHz. 


N ot E To connect a PC to the HDMI® input, see “Connect a computer to the 
TV’s HDMI® terminal" on page 41. 

To connect an HDMI® device, you will need one HDMI® cable 

(type A connector) per HDMI® device: 

❖ For proper operation, it is recommended that you use an 
HDMI® cable with the HDMI® Logo (HOfTII). 

❖ To display an 1080ip/60Hz signal format, you will need a High 
Speed HDMI® cable. A conventional HDMI®/DVI cable may 
not work properly. 

❖ HDMI® cables transfer both video and audio. Separate analog 
audio cables are not required (see illustration). 


TV back panel 



(Sample Illustration) L6200U/L7200U Series—Connecting an 
HDMI m or DVI device to the HDMI® Input 


To view the HDMI® device video: 

Select HDMI 1, HDMI 2, HDMI 3 or HDMI 4 video input source 
on the TV. (Press the INPUT button on the remote control. For 



































Connecting Your TV 

Using the TV remote and HDMI® CEC Control to control 



more information, see “Selecting the video input to view” on 
page 86. 

To connect a DVI device, you will need: 

❖ HDMI® to DVI adapter cable 

For proper operation, the length of an HDMI® to DVI adapter 
cable should not exceed 9.8 ft (3m). The recommended length 
is 6.6 ft (2m). 

❖ 3.5mm Stereo to RCA Y-cable 

An HDMI® to DVI adapter cable transfers video only. Separate 
analog audio cables are required (see illustration). 


NOTE To ensure that the HDMI® or DVI device is reset properly: 

❖ When turning on your electronic components, turn on the TV 
first, and then the HDMI® or DVI device. 

❖ When turning off your electronic components, turn off the 
HDMI® or DVI device first, and then the TV. 


note [1] EIA/CEA-861-D compliance covers the transmission of 

uncompressed digital video with high-bandwidth digital content 
protection, which is being standardized for reception of high- 
definition video signals. Because this is an evolving technology, it is 
possible that some devices may not operate properly with the TV. 


Using the TV remote and HDMI® CEC Control to control other 
devices 

To control the basic functions of connected audio/video devices 
using the TV’s remote control, connect an HDMI® CEC compatible 
audio receiver or playback device. The HDMI® CEC Control 
feature uses CEC technology as regulated by the HDMI® standard. 


Audio receiver Playback device 

(HDMI®-CEC DVD player, etc.) 



(Sample Illustration) L6200U/L7200U Series—Connecting an 
HDMI ® CEC compatible audio receiver and playback device 
































Connecting Your TV 

Connecting an HDMI® audio system 


To connect an audio receiver and playback devices, you will need 
HDMI® cables, see “HDMI® cable (with HDMI Logo)” on page 28. 


N ot E If several devices are connected, HDMI® CEC Control feature may 
not operate properly, see “HDMI® CEC Control input source 
selection” on page 100. 

For proper operation, it is recommended that you use HDMI® cables 
with the HDMI® Logo (Harm). 


Before controlling the devices: 

❖ For an explanation of setup and operations, see “Other HDMI® 
CEC Control functions” on page 101. 

❖ Configure the connected devices. See each device’s operation 
manual. 

note This feature is limited to models incorporating Toshiba’s 

HDMI® CEC Control feature. However, Toshiba is not liable for those 
operations. See the individual instruction manuals for compatibility 
information. 


When using an external AV amplifier the picture and sound may 
not be properly synchronized. In this case, adjust the delay time of 
the sound on the AV amplifier. 


N ot E The control range of the delay time differs according to the device 
you use. 


Connecting an HDMI® audio system 

If your HDMI® amplifier supports ARC, audio from the TV can be 
sent to the amplifier via an existing HDMI® cable. 








Connecting Your TV 

Connecting a computer 

You will need and HDMI® cable. 




AV amplifier that 
suppcrts ARC 



HDMI 

cable 





(Sample Illustration) L6200U/L7200U Series — Connecting to 
HDMI ® ARC 

HDMI®'s ARC (Audio Return Channel) feature 

This feature enables the audio signal of the TV to be sent to an AV 
amplifier via the HDMI® cable. It will not be necessary to connect a 
cable from the audio output of the TV to the audio input of the AV 
amplifier to reproduce the audio received from the tuner of the TV 
through the AV amplifier. 

Connecting a computer 

With either the PC IN or HDMI® connection, you can view your 
computer’s display on the TV and hear the sound from the TV’s 
speakers. 
















Connecting Your TV 

Connecting a computer 


Connecting a computer to the TV’s PC IN terminal: 

When connecting a computer to the PC IN terminal on the TV, use 
an analog RGB (15-pin) computer cable and a PC audio cable. For 
more information, see “Overview of cable types” on page 27. 


TV back panel 



HDMI®to DVI 
adapter cable 


(Sample Illustration) L6200U/L7200U Series—Connecting to a 
computer through analog RGB cable 


To use a computer, set the monitor output resolution on the 
computer before connecting it to the TV. The supported signal 
formats are VGA, SVGA, XGA, WXGA and SXGA. For detailed 
signal specifications, see “Acceptable signal formats for PC IN, 
HDMI®, and 3D” on page 195. 

Other formats or non-standard signals will not be displayed 
correctly. 

To display the optimum picture, use the computer setting feature, 
see “Using your computer with the TV” on page 102. 





















Connecting Your TV 

Connecting a computer 



NOTE 


The PC audio input terminal on the TV is shared with the HDMI4 
and ColorStream® HD2 terminal. For configuration information, 
see “Setting the computer audio” on page 103. 

Some computer models cannot be connected to this TV. 

If the computer has a compatible mini D-sub15-pin terminal, an 
adapter is not required. 

Depending on the content’s title and the computer’s 
specifications, some scenes may be skipped or you may not be 
able to pause during multi-angle scenes. 


Signal names for mini D-sub 15-pin connector: 


Pin No.: 

Signal Name: 

Pin No.: 

Signal Name: 

Pin No.: 

Signal Name: 

1 

R 

6 

Ground 

11 

NC 

2 

G 

7 

Ground 

12 

NC 

3 

B 

8 

Ground 

13 

H-sync 

4 

NC* 

9 

NC 

14 

V-sync 

5 

NC 

10 

Ground 

15 

NC 


*NC=Not connected 


Connect a computer to the TV’s HDMI® terminal 

When connecting a computer with a DVI port to the HDMI® 
terminal on the TV, use an HDMI® to DVI adapter cable and analog 
audio cables. 

When connecting a computer with an HDMI® port, use an HDMI® 
cable (type A connector). Separate analog audio cables may not be 
necessary, depending on computer hardware and setup. 














Connecting Your TV 

Connecting to a home network 


For more information, see “Overview of cable types” on page 27. 



(Sample Illustration) L6200U/L7200U Series—Connecting to an 
HD MI® terminal 

The supported signal formats are VGA, SVGA, XGA, WXGA, 
SXGA, 480i (60Hz), 480p (60Hz), 720p (60Hz), 10801 (60Hz), and 
1080p (24Hz/60Hz). For signal specifications, see “Acceptable 
signal formats for PC IN, HDMI®, and 3D” on page 195. 


note ❖ The edges of the picture may be hidden. 

❖ If receiving a 480i (HDMI), 480p (HDMI), 720p, 1080i, or 1080p 
signal program, Native mode scales the video to display the 
entire picture within the borders of the screen (i.e. no 
overscanning). 


Connecting to a home network 

The LAN port allows your Toshiba TV to connect to your home 
network. 

You can use this home network to access photos, movies, and 
music files that are stored on a Connected Media Server and play 
them on your TV. 









Connecting Your TV 

Connecting to a home network 



Connecting the TV directly to a computer without an Internet connection 

You will need a Crossover LAN cable. 



(Sample Illustration) L6200U/L7200U Series—Connecting a 
computer without Internet connection 

Connecting the TV to a home network without an Internet connection 

Items needed: 

❖ Standard LAN cables 

❖ Router with a hub 


Router with a hub 



(Sample Illustration) L6200U/L7200U Series—Connecting a 
network without Internet connection 






















Connecting Your TV 

Connecting to a home network 


Connecting the TV to a home network with an Internet connection - 
wired 

Items needed: 

❖ Coaxial or telephone cable (depending on your modem type) 

❖ Standard LAN cables 

❖ Router with Hub 

❖ Modem (DSL or cable) 

Modem (DSL or cable) Router with a hub 



(Sample Illustration) L6200U/L7200U Series—Connecting with 
Internet connection - wired 


Item: Description: 

1 Coaxial or telephone cable (depending on your modem type) 

2 Standard LAN cable 

3 Do NOT connect a phone jack directly to the TV’s LAN port. 


Connecting the TV to a home network with an Internet connection - 
wireless 

Items needed: 


Coaxial or telephone cable (depending on your modem type) 
Standard LAN cables 



























Connecting Your TV 

Connecting to a home network 

❖ Wireless LAN access point or wireless router 

❖ Modem (DSL or cable) 




(Sample Illustration) L6200U/L7200U Series—Connecting with 
Internet connection - wireless 


Item: Description: 

1 Coaxial or telephone cable (depending on your modem type) 

2 Standard LAN cable 


The transmission speed over the wireless LAN and the distance 
over which wireless LAN can reach may vary depending on 
surrounding electromagnetic environment, obstacles, access point 
design and configuration, and client design and software/hardware 
configurations. The actual transmission speed will be lower than 
the theoretical maximum speed. 


note The Built-in WLAN Adapter is based on the IEEE 802.1 In 

specification and may not be fully compatible with, or support 
some features (e.g., security) of certain Wi-Fi equipment that 
are based on the draft version of IEEE 802.11 n. 

























Chapter 3 


Using the Remote Control 

Controlling other devices 

The TV’s remote control can operate other devices as described in 
the 1R Blaster section on page 55. 

Installing batteries 

To install batteries: 

1 Pull up to open the cover. 



(Sample Illustration) Removing the battery cover 
2 Install two AA size batteries. 


46 











Using the Remote Control 

Installing batteries 


47 


note Use carbon zinc batteries or alkaline batteries. 



(Sample Illustration) installing the batteries 


3 Slide on the cover. 


CAUTioin Do not expose batteries to excessive heat such as sunshine, fire, etc. 


NOTE 


❖ Every time you change the batteries, you must reprogram the 
remote. 

❖ Dispose of batteries in a designated disposal area. 

❖ Always consider the environment when disposing of batteries. 
Always follow applicable laws and regulations. 

❖ If the remote does not operate correctly, or if the operating range 
is reduced, replace the batteries. 

❖ Always replace both batteries with new ones. Never mix battery 
types or use new and used batteries together. 

❖ Always remove batteries from the remote if they are dead or if the 
remote control is not to be used for an extended period of time. 
This prevents battery acid from leaking into the battery 
compartment 

















Using the Remote Control 

Remote control effective range 


Remote control effective range 

1 For optimum performance, aim the remote control directly at 
the TV and make sure there are no obstructions between the 
remote control and the TV. 



16.4 ft (5m) 


H 


(Sample Illustration) Remote control effective range 












Using the Remote Control 

Learning about the remote control 


49 


Learning about the remote control 

Only the buttons used to operate the TV are described in this 
section. 

For the HDMI® CEC Control functions, see “Using HDMI® CEC 
Control” on page 97. 



(Sample Illustration) Remote control overview 


NOTE 


The L6200U series remote has no LIGHT button. The LIGHT button 
is only available on the L7200U series remote. 


































































50 


Using the Remote Control 

Learning about the remote control 


N OT E The error message “NOT AVAILABLE” may appear if you press a key 
for a function that is not available. 


Item: Description: 

Function: 

1 

POWER button 

Turns the TV On and Off. 

When the TV is on, the power LED 
indicator on the TV front glows green. 

2 

3D button 

Accesses the 3D options. 

3 

Light button 

Illuminates the keypad for five 


(Model L7200U) 

seconds. 

3 

Sleep button 
(Model L6200U) 

Accesses the sleep timer. 

4 

TV button 


5 

Cable/Satellite 

button 

Auxiliary button 
BD/DVD button 

— Switches to the TV input assigned to 

6 

7 

each mode key: TV, CABLE/SAT, 
BD/DVD, or AUX 

8 

Channel Number 
buttons (0-9) 

Directly tunes channels. 

9 

(-) button 

Enters 2-part channel numbers. 

10 

INPUT button 

Selects the video input source. 

11 

CH RTN button 

Returns to the last viewed channel or 



source. 

12 

VOL (+/-) buttons Adjusts the volume level. 

13 

CH (a /▼) buttons Cycles through programmed 



channels. 

14 

MUTE button 

Reduces or turns off the sound. 

15 

INFO button 

Displays TV status information as well 
as program details, when available. 

16 

ePORTAL button 

Launches the ePortal page 



on-screen. 

17 

NETFLIX button 

Launches the Netflix® application 



on-screen. 

18 

SEARCH button 

Accesses the SearchAII function. 

19 

APPS button 

Launches the Apps window on-screen. 

20 

MENU button 

Accesses the main TV menu system. 


Item: Description: 

Function: 

21 

GUIDE button 

Launches the MediaGuide 
application on-screen. 

22 

(◄/►) buttons 

Selects on-screen menu options. 

23 

(■*■/▼/• Menu > GET HELP > 
System Information > OK button. 


Navigating the menu system 

❖ To open the menu system, press the MENU button on the 
remote control or TV control panel. 



PICTURE 

V 

PREFERENCES 

- - _ SETUP 

_ 3 ® 

GET HELP 

SETTINGS 

* 

NETWORK 

TIMERS 


(Sample Illustration) Main menu 


❖ When a menu is open, press the (A/T/^/^ arrow) buttons on 
the remote control to move in the corresponding direction. 

❖ To select a highlighted item or save your menu settings, press 
the OK button. (A highlighted menu item appears in a different 
color in the menu.) 

❖ All menus close automatically if no selection is made within 
approximately 60 seconds. 

❖ To close a menu instantly, press the EXIT button. 










62 


Initial Setup and Menu 

Main menu layout 


Main menu layout 


To open the main menus in the table below, press the MENU 
button on the remote control or TV control panel. 


1st Layer 

2nd Layer 

3rd Layer 

Page 

GET HELP 

Software Licenses 


page 141 


Software Upgrade 


page 140 


System Information 


page 107 


eMANUAL 


page 142 

3D 


3D Auto Start 

page 81 



2D to 3D Depth 

page 84 



3D PIN 

page 81 



3D Safety Settings 

page 83 



3D Important Information 

page 72 

SETTINGS 

SOUND 

SOUND Menu 

page 125 


PICTURE 

PICTURE Menu 

page 115 


PREFERENCES 

PREFERENCES Menu 

page 64 


SETUP 

SETUP Menu 

page 64 

NETWORK 

Media Player Setup 


page 157 


Network Setup 


page 131 


Network Device Setup 


page 136 


Smart Apps Setup 


page 142 

TIMERS 

On Timer 


page 104 


Sleep Timer 


page 105 


Game Timer 


page 96 
































Initial Setup and Menu 

Quick Menu 


63 


Quick Menu 


Quick menu helps you access some options more quickly. 

Press the QUICK button to display the Quick menu and press the 
(A/V)buttons to select an option. 


note Quick menu items differ depending on the current mode. 


Quick Menu Item 

Page 

Picture Mode 

page 79 

3D Settings 

page 78 

HDMPCEC Player Control 

page 99 

Speakers 

page 165 

Wireless Information 

page 135 

Interval Time 

page 165 

Repeat 

page 161 

Device Information 

page 160 

SOUND 

page 165 

PICTURE 

page 79 















Chapter 5 


Setting up your TV 


How to navigate the menu 

❖ Press the MENU button. Select SETTINGS, Main menu. 
Submenu, and then press the OK or EXIT button. 


Format: 

Description: 

MENU 

Press the MENU button. 

SETTINGS 

Press the (◄/► arrow) buttons to select SETTINGS. 

Main menu 

Press the (◄/► arrow) buttons to select a menu icon (SOUND, 
PICTURE, PREFERENCES, SETUP, GET HELP, 3D, SETTINGS, 
NETWORK, TIMERS) 

Submenu 

Press the (A/T arrow) buttons to select a menu. 

OK 

Press the OK button. 


Changing initial settings 

From Quick Setup: 

1 Press the MENU button. 

2 Select SETTINGS, SETUP, Quick Setup, and then press the 
OK button. 


64 


A confirmation message appears. 









Setting up your TV 

How to navigate the menu 



3 Press the arrow) buttons to select Yes. 

4 Pre s s the OK button. 

To change settings, see “Initial setup” on page 51. 

Individual settings 

Menu Language 

You can choose from three different menu language settings 
(English, Fran£ais, and Espanol). The TV displays menus and 
messages in your preferred language. You can also select the 
country in which you reside. 

1 Press the MENU button. 

2 Select SETTINGS, SETUP, and then Menu Language. 

3 Press the arrow) buttons to select your preferred 
language. 

4 Press the (▼ arrow) button to select Country. 

5 Press the arrow) buttons to select the country. 

Local Time 

This setting allows you to specify the correct time zone for your 
region. 

1 Press the MENU button. 

2 Select SETTINGS, SETUP, TV Settings, and then press the 
OK button. 

3 Press the (A/T arrow) buttons to select Local Time. 

4 Press the OK button. 

5 Select an option: 

❖ Time Zone 

❖ Daylight Saving Time 

6 Press the arrow) buttons to select your time zone or 

select On to activate Daylight Saving Time. 

Store/Home Mode 

You can select Store or Home to designate the TV location. Select 
Home for normal home use. 

1 Press the MENU button. 

2 Select SETTINGS, SETUP, and then Store/Home Mode. 



Setting up your TV 

How to ncnrigate the menu 


3 Press the (^/ ► arrow) buttons to select Home. 

4 Press the OK button. 

ANT/CABLE In 

This setting configures the antenna input source for the 
ANT/CABLE terminal. 

1 Press the MENU button. 

2 Select SETTINGS, SETUP, and then ANT/CABLE In. 

3 Select Antenna or Cable and press Next. 

4 Select Cable and press Next. 

N ot E If you do not want to scan channels, you do not need to make a 
selection for ANT/CABLE. Select Next and press OK to skip this 
step. 


5 Select Start Scan. 

After scanning is complete, the auto tuning results screen will 
appear. 

6 Press OK or EXIT. 

Storing channels in memory (optional) 

To make sure your TV stops only on the channels you want when 
you press the CH Up/Down arrow buttons on the remote control or 
the control panel, store those channels in the TV's memory. 

Auto Tuning 


N ot E You must set up the antenna/cable input source first. See “Initial 
setup” on page 51. 


You can set up the TV to detect all active channels in your area and 
store them in its memory. Then you can manually store or skip 
individual channels from memory. 


Option: 

Description: 

Cable 

Note: If you select Cable, auto tuning deletes previously stored 
channels from memory. 

This setup requires some time, but you do not need to repeat the 
setup unless your cable TV service’s lineup changes significantly. 












Setting up your TV 

How to navigate the menu 


Option: 

Description: 

Antenna 

Auto tuning retains stored channels and stores newly found 
channels into memory. 

To skip an antenna source channel and remove it from memory, set 
the channel to be skipped. See ‘‘Skipping channels” on page 68. 

NOTE 

To tune to channels not stored in memory, use buttons 0-9 and the 
DASH button on the remote control. 

1 

Press the MENU button. 

2 

Select SETTINGS, SETUP, Auto Tuning, and then press the 
OK button. 

3 

A confirmation screen appears. 

Press the OK button to start Auto Tuning or press the EXIT 
button to abort. 

4 

The TV cycles through the channels and stores all active 
channels in memory. 

To view the programmed channels, press the CH Up/Down 
arrow buttons. 


Manual Tuning 

After storing channels in memory, you can manually enter channels 
if the channel number is known. 

1 Press the MENU button. 


2 

Select SETTINGS, SETUP, Manual Tuning, and then press 

3 

the OK button. 

Use buttons 0-9 on the remote control to enter the channel 
number (for example, 56). 

4 

Press the OK button. 


5 Press the OK button again to begin Manual Tuning. 
The channels found are listed at the bottom of the screen. 


Option: 

Description: 

ATV 

Analog channel 

DTV 

Digital channel 











Setting up your TV 

How to navigate the menu 


Skipping channels 

To prevent a channel from being viewed, you can set it to be 
skipped. 

1 Press the MENU button. 

2 Select SETTINGS, SETUP, TV Settings, and then press the 
OK button. 

3 Press the ( A.IV arrow) buttons to select Channel Options, and 
then press the OK button. 

The list of channels appears. 



(Sample Image) Channel options 


4 Move to the Skip column and press the (A./T arrow) 
buttons to select a channel to skip. 

5 Press the OK button. 

The box is selected. 

6 To clear the selection, press the OK button. 


N OT E You cannot tune skipped channels using the CH Up/Down arrow 
buttons. Use buttons 0-9 and the DASH button on the remote 
control. 


Skipping video inputs 

You can set video inputs to be skipped when selecting inputs in the 
Input selection window. 

To turn on skip 


1 Press the MENU button. 








Setting up your TV 

How to navigate the menu 



2 Select SETTINGS, PREFERENCES, AV Connection, and 
then press the OK button. 

3 Press the (A/Y arrow) buttons to select Input Labeling. 

4 Press the OK button. 

5 Press the (A/Y arrow) buttons to select the item you wish to 
skip. Then press the RED button to turn on Skip. 

To turn off skip 

Press the RED button again to turn off Skip. 


Labeling analog TV channels 

1 Press the MENU button. 

2 Select SETTINGS, SETUP, TV Settings, and then press the 
OK button. 

3 Press the (A/Y arrow) buttons to select Channel Options, and 
then press the OK button. 

The list of channels appears. 



(Sample Image) Channel options 


4 Press the (A/Y arrow) buttons to select a channel to label. 

5 Press the OK button. 

The Software Keyboard window appears. 

6 Input a name using the Software Keyboard, see “Using the 
software keyboard” on page 139. 


7 


Press the BLUE button. 




Setting up your TV 

How to navigate the menu 


Labeling video inputs 

The input labels are shown in the input selector and banner 
displays. You can label video inputs according to the devices you 
have connected to the TV. 

1 Press the MENU button. 

2 Select SETTINGS, PREFERENCES, AV Connection, and 
then press the OK button. 

3 Press the ( A/T arrow) buttons to select Input Labeling, and 
then press the OK button. 

4 Press the (A/T arrow) buttons to select the item you wish to 
label. Press the (arrow) buttons to select Receiver, 
Cable, DVD, Game, PC, Recorder, Satellite, VCR or Blu- 
ray™. 

5 Repeat Step 4 for other video inputs. 

Configuring shared inputs 

To set Shared AV Audio 

1 Press the MENU button. 

2 Select SETTINGS, PREFERENCES, AV Connection, and 
then press the OK button. 

3 Press the (A/T arrow) buttons to select Video 1/ColorStream 
HD1 Audio/HDMI 3 Audio. 

4 Press the (► arrow) buttons to select ColorStream HD1, 
Video 1, or HDMI 3. 

To set Shared PC Audio 

1 Press the MENU button. 

2 Select SETTINGS, PREFERENCES, AV Connection, and 
then press the OK button. 

3 Press the ( A/T arrow) buttons to select PC/HDMI 4 Audio. 

4 Press the (► arrow) buttons to select PC or HDMI 4. 

Setting the Auto Input feature 

You can change TV inputs using the MODE SELECT buttons on 
the remote control: TV, CABLE/SAT, BD/ DVD, or AUX. After 
setting an input for a specific MODE SELECT button, the TV 
automatically switches to the input. 


Setting up your TV 

How to navigate the menu 



Auto Input settings options for each MODE SELECT button: 

Option: 


Description: 

TV 


ANT/CABLE 

CABLE/SAT 

ANT/CABLE, Video 1 Video 2 ColorStream HD1, HDM11, HDMI2, 
HDMI3, HDMI4, PC 

BD/DVD 


Video 1 Video 2 ColorStream HD1, HDM11, HDMI 2, HDMI 3, 
HDMI 4, PC 

AUX 


ANT/CABLE, Video 1 Video 2 ColorStream HD1, HDM11, HDMI 2, 
HDMI 3, HDMI 4, PC 



NOTE The TV mode select button will be restricted to the ANT/CABLE 
input. 


To set Auto Input 

1 Press the MENU button. 

2 Select SETTINGS, PREFERENCES, Mode Select Key 
Setup, and then press the OK button. 

3 Press the arrow) buttons to select On or Off. 

4 Press the (A/Y arrow) buttons to select the mode you wish to 
set. 

5 Press the ( 4 / ► arrow) buttons to select an input source for that 
mode. 

6 Repeat the procedure for other modes. 

To turn off Auto Input 

❖ Select Off in Step 3. 

To reset Auto Input 

❖ Select Reset, and then press the OK button. 






Chapter 6 


Basic features 


Viewing 3D images 

Before using the 3D function, note the following: 

In addition to compatible 3D glasses, viewing 3D programming 
requires the following (not included): 

❖ Compatible 3D playback device or 3D source. 

❖ 3D capable HDMI® cable. 

If you wish to obtain extra 3D glasses: 

Toshiba provides 3D glasses for this television as an option. 
To obtain them visit: 

US: http://ceaccessories.toshiba.com/ 

Canada: http://www.shoptoshiba.ca/ 

note Use the type of 3D glasses that are compatible with to your TV. 


72 



Basic features 

Viewing 3D images 


73 


acaution! 


caution"! 


Health precautions: 

❖ Due to the possible impact on vision development, viewers of 3D 
programming should be age 6 or above. Children may be more 
susceptible to health effects from viewing 3D images and should 
be closely supervised. 

❖ Some viewers may experience a seizure or blackout when 
exposed to certain flashing images or lights contained in certain 
3D television pictures or video games. Anyone who has had a 
seizure, loss of awareness, or other symptom linked to an 
epileptic condition, or has a family history of epilepsy, should 
contact a health care provider before using the 3D function of 
this product. 


Handling the 3D glasses: 

❖ When cleaning the 3D glasses, gently wipe with a dry, soft cloth. 
First, remove any dirt or dust from the 3D Glasses. 

Harsh rubbing or use of a dirty or coarse cloth will scratch the 
3D Glasses. Do not use benzene, paint thinner, alcohol, water, or 
abrasive cleaners, which may damage the 3D glasses. 

❖ When not using the 3D glasses, store them away from high 
temperatures and humidity. 

❖ Do not store the 3D glasses in areas of extreme heat or cold, as 
deformation can occur. If deformation occurs, replace the 3D 
glasses. 

❖ The lenses of the 3D glasses are different from those of ordinary 
glasses, and are very thin. Be very careful in handling the 3D 
glasses as the lens can pop out easily. 

❖ Do not put excessive force on the lenses. 

❖ Do not scratch the surface of the lenses with sharp objects. 

❖ Do not drop or bend the 3D glasses. 

❖ Do not use benzene, paint thinner, alcohol, water, or abrasive 
cleaners, which may damage the 3D glasses. 

❖ The 3D glasses are not subject to repair. If the glasses are broken 
or scratched, purchase a new pair of 3D glasses. 

❖ The 3D glasses are not subject to repair, but can be replaced if a 
problem occurs due to an initial fault with the glasses 






74 


Basic features 

Using 3D junctions 


note Watching the TV: 

❖ Proper 3D effects or 3D-to-2D conversion results may not be 
obtained depending on the received 3D content. 

❖ 3D effect and image quality may vary depending upon content 
quality and display device capability/ functionality/settings. 

❖ Wear the 3D glasses properly, otherwise you may not see the 
correct 3D images. 

❖ When not viewing 3D images, take off the 3D glasses; otherwise, 
it may be difficult to see the display on other products such as 
your computer, digital clock, or calculator, etc. 

❖ Use the 3D glasses at the proper viewing angle and distance, see 
“Safety Precautions for 3D glasses" on page 6. 


N ot E Use a high-speed HDMI® cable when you connect a device such as a 
3D compatible Biu-ray Disc™ player or computer to the TV. When 
you use a standard HDMI® cable, 3D images may not display 
correctly. 

Some functions cannot be shown in 3D mode. 


Using 3D functions 

Incoming video signals can either be in 2D or 3D format. A 2D 
signal can be viewed in either 2D or 3D, and 3D can be viewed in 
either 2D or 3D. If the TV can detect the fact that a signal is 3D, it 
can change to 3D mode automatically, see “Setting the 3D start 
message” on page 82. Otherwise you can change the viewing mode 
using the 3D button. Finally, the format of the 3D signal can be 
either Side by Side (SBS) or Top and Bottom (TAB). You may 
have to choose the correct format if the TV can not detect it 
automatically, see “Selecting 3D format from the Quick menu in 
3D mode” on page 78. 

You can also change 2D images to 3D images by pressing the 3D 
button when viewing in 2D. 





Basic features 

Using 3D junctions 


75 


NOTE 


❖ In order to switch to 3D, the TV must be receiving a 3D signal. 

❖ If appropriate mode and format are not selected, 3D image is not 
correctly displayed. 

❖ If the appropriate 3D mode and format are not selected, the 3D 
image will not display correctly. 

❖ There are individual differences in perception of 3D images. 

❖ When viewing 3D images, wear the 3D glasses. 

❖ The 2D to 3D conversion function is activated and controlled by 
you according to your personal preferences. 

❖ The 2D to 3D conversion function is meant for enjoyment of 2D 
home video, and other 2D content you create, in 3D according to 
your personal preferences. 

❖ it is not intended for unauthorized use of copyrighted works. To 
the extent that you need to obtain permission from a copyright 
holder to view copyrighted works, it is your responsibility to 
obtain such permission. 

❖ The 2D to 3D conversion function is not intended for use with 
pre-recorded 2D copyrighted content owned by a third-party 
unless the copyright owner has given direct or indirect 
permission, or unless applicable law permits such use. To the 
extent you need to obtain permission from a copyright holder to 
view copyrighted works, it is your responsibility to obtain such 
permission. 





Basic features 

Using 3D junctions 


Switching display mode or selecting 3D format 



There are four TV viewing modes: 

Mode: 

Description: 

3D 


Displays 3D images. 

2D 


Displays 2D images by changing 3D images to 2D. 

2D to 3D Displays 3D images by changing 2D images to 3D. 

Native 

Displays a received signal format as it is. 

3D signals can be sent in one of three formats: 

31) Format: Description: 



Side by Side (SBS Images for the left and right eyes are positioned 
side-by-side. 


To and Bottom (TAB) Images for the left and right eyes are positioned at the 
top and bottom of the screen 


Frame Packing (FP)* Images for the left and right eyes are positioned at the 
top and bottom of the screen. 


* This format cannot be selected manually. 


❖ If the right and left images are the same in Native mode, select 
SBS. 

❖ If the top and bottom images are the same in Native mode, 
select TAB. 

The 3D button operation 

Depending on the input mode, the 3D button function may be 
different when viewing Native mode. 


Input: 

Function: 

Analog Inputs 

Changes the viewing mode to 2D to 3D mode. 

HDMI® 

Displays the selection window. 

Analog Broadcast 

Changes the viewing mode to 2D to 3D mode. 

Digital Broadcast 

Displays the selection window. 
































Basic features 

Using 3D junctions 



Input: 

Function: 

HDMI with 3D Auto 
Detect Information 

Changes the viewing mode to 3D mode 

Internet 

Changes the viewing mode to 2D to 3D mode. 


NOTE 

When viewing 3D mode or 2D to 3D mode, pressing the 3D button 
changes the viewing mode to Native mode. 


Switching to 3D mode 

❖ Set 3D Auto Start to 3D. 

❖ Press the 3D button and select 3D while viewing 2D mode or 
Native mode. 


Input Signal/Switching Display Mode Trigger Press 3D Button 


Type Additional 
Information 


Format Source Select 3D Select 2D to 
Signal 3D 



With 3D Auto Detect 
Information SBS 


3D Format 
Signal 


TAB 


felt) 

felt) 


EE 


EE 

EE 


Without 3D Auto 
Detect Information 


SBS 


TAB 



EE 




felt) 

felt) 



fel*J 

felt) 


2D Format Signal 


1551 


EE 


* Correct 3D image. 






























Basic features 

Using 3D junctions 


Selecting 3D format from the Quick menu in 3D mode 

1 Press the QUICK button. Select 3D Settings, and then press 
the OK button. 

2 Press the (A/T arrow) buttons to select 3D Format Select, 
and then press the OK button. 

3 Press the (► arrow) buttons to select Side by Side or Top 
and Bottom. 


Input Signal/Switching Display Mode Trigger Quick menu/ 

3D Format Select 

Type Additional Format Source SBS TAB 

Information Signal 


FP 

With 3D Auto Detect 
Information SBS 



3D Format 
Signal 



2D Format Signal 


l3Dl 


* Correct 3D image. 
















Basic features 

Using 3D junctions 


79 


Switching to 2D mode 

1 Set 3D Auto Start to 2D. 

2 Press the 3D button while viewing 3D mode. 


Input Signal/Switching Display Mode Trigger Press 3D Button 

Type Additional Format Source Select 3D Select 2D to 

Information Signal 3D 


3D Format 
Signal 


FP 

With 3D Auto Detect 
Information SBS 



TAB 


K1*J 


Without 3D Auto 
Detect Information 


SBS 

TAB 



Kl«tl 


2D Format Signal 


l3Di 


* Correct 2D image. 


BE 


EE 


EE 




Selecting 2D format from the Quick menu in 2D mode 

1 Press the QUICK button. Select 3D Settings, and then press 
the OK button. 

2 Press the (A/T arrow) buttons to select 2D Format Select, 
and then press the OK button. 

3 Press the (^/ ► arrow) buttons to select Side by Side or Top 
and Bottom. 



















80 


Basic features 

Using 3D junctions 


Input Signal/Switching Display Mode Trigger Quick menu/ 

3D Format Select 

Type Additional Format Source SBS TAB Native 
Information Signal 


3D 

Format 

Signal 


FP 


With 3D Auto 

Detect 

Information 


SBS 




BE 


TAB 


ML»J 


BE 



Without 3D SBS 

Auto Detect 
Information tar 



BE 



BE 


K1»J 


2D Format Signal 


\M 




BE 


* Correct 2D image. 


note Take off the 3D glasses in 2D mode 


Switching to Native mode 

Press the 3D button while viewing 3D mode. 

Press the 3D button while viewing 2D to 3D mode. 


N ot E When 3D format signal with 3D Auto Detect Information is received, 
it is not possible to switch to Native. 


Quick menu in 2D mode 

1 Press the QUICK button. Select 3D Settings, and then press 
the OK button. 

2 Press the (A/T arrow) buttons to select 2D Format Select, 
then press the OK button. 

3 Press the (► arrow) buttons to select Native. 






















Basic features 

Setting the 3D PIN code 


81 


To switch 2D to 3D mode 

❖ Press the 3D button and select 2D to 3D while viewing 2D or 
Native mode. 

note When using ATV, Video, ColorStream HD, Internet, or PC, the 

viewing mode can be changed to 2D to 3D mode by pressing 3D. 

Setting the auto start mode 

This controls what the TV does when it detects a 3D format signal 
with 3D Auto Detect Information. 

1 Press the MENU button. 


2 Use the (A/V arrow) buttons to select 3D, and then press the 


3 

4 

OK button. 

Press the ( A/T arrow) buttons to select 3D Auto Start. 

Press the arrow) buttons to select 3D. 2D, or Off. 

Option: 

Description: 

3D 

Displays in 3D mode automatically when 3D format signal with 3D Auto 
Detect Information is received. 

2D 

Displays in 2D mode automatically when 3D format signal with 3D Auto 
Detect Information is received. 

Off 

Displays a screen that allows you to select 3D or 2D when 3D format signal 
with 3D Auto Detect Information is received. 


Setting the 3D PIN code 

A 3D PIN code is necessary for using 3D Safety Settings. 

Enter a new PIN code 

1 Press the MENU button. 

2 Use the (A/V arrow) buttons to select 3D, and then press the 
OK button. 

3 Press the (A/▼ arrow) buttons to select 3D PIN, and then 
press the OK button. 

4 Press the number buttons to enter a 4-digit number, and then 
confirm the code. 








82 


Basic features 

Setting the 3D PIN code 




NOTE 

the PIN code cannot be set to “0000.” 

Change or delete your PIN code 

l 

Press the MENU button. 

2 

Use the ( A/T arrow) buttons to select 3D, and then press the 
OK button. 

3 

Press the (A/T arrow) buttons to select 3D PIN. 

4 

Press the number buttons to enter your 4-digit PIN code. 

5 

Select Change PIN or Delete PIN, and then press the OK 
button. 

NOTE 

❖ The PIN code cannot be set to “0000.” 

❖ If PIN is deleted, 3D Safety Settings are grayed out, and the 
settings are reset to the factory default. 


Forgotten PIN codes 

1 Press the MENU button. 

2 Use the {A/'T arrow) buttons to select 3D, and then press the 
OK button. 

3 Press the ( A/T arrow) buttons to select 3D PIN. 

4 Press the INFO button 4 times within 5 seconds. 

The code clears. 

5 Enter a new PIN code. 

Setting the 3D start message 

When this feature is set to On, a message displays on the screen 
when a 3D signal is received. 

1 Press the MENU button. 

2 Use the ( A/T arrow) buttons to select 3D, and then press the 
OK button. 

3 Press the ( A/T arrow) buttons to select 3D Safety Settings, 
and then press the OK button. 

4 Enter your 4-digit 3D PIN code. 

5 Press the (A/T arrow) buttons to select 3D Start Message. 



Basic features 

Setting the 3D PIN code 


83 


6 Press the (4/^ arrow) buttons to select On or Off. 

Setting the 3D Lock 

When this feature is set to On, you must enter your 3D PIN code to 
change the display mode to 3D mode or 2D to 3D mode. 

1 Press the MENU button. 

2 Use the (A/T arrow) buttons to select 3D, and then press the 
OK button. 

3 Press the (A/T arrow) buttons to select 3D Safety Settings, 
and then press the OK button. 

4 Enter your 4-digit 3D PIN code. 

5 Press the (A/T arrow) buttons to select 3D Lock. 

6 Press the (^/^ arrow) buttons to select On. 

Setting the 3D Timer Lock 

When the 3D Timer Lock feature is set to On, the PIN input 
window and the 3D start message will not appear while the 3D 
Enable timer is active, even if you switch to 3D Mode. This 
prevents it from asking for the 3D Lock PIN, and will not display 
the 3D start message every you switch to 3D. 

1 Press the MENU button. 

2 Use the (A/T arrow) buttons to select 3D, and then press the 
OK button. 

3 Press the (A/T arrow) buttons to select 3D Safety Settings, 
and then press the OK button. 

4 Enter your 4-digit 3D PIN code. 

5 Press the (A/T arrow) buttons to select 3D Timer Lock. 

6 Press the (^/^ arrow) buttons to select On. 

note The PIN input window appears when “continue” is selected in the 
reminder dialogue box for Enable 3D Timer even if 3D Timer Lock is 
activated. 


Setting the Enable 3D Timer 

This feature allows you to set a reminder to not watch a 3D video 
for an extended period of time. Once a set period of time has 
passed, a dialogue box appear asking if you wish to continue 
viewing. 



84 


Basic features 

Setting the 3D PIN code 


1 Press the MENU button. 

2 Use the (A/T arrow) buttons to select 3D, and then press the 
OK button. 

3 Press the ( A/T arrow) buttons to select 3D Safety Settings, 
and then press the OK button. 

4 Enter your 4-digit 3D PIN code. 

5 Press the (A/T arrow) buttons to select Enable 3D Tinier. 

6 Press the (► arrow) buttons to select 30, 60, 90, or 120 
minutes. 

7 To cancel the timer, select Off. 

Displaying 3D Important Information 

1 Press the MENU button. 

2 Use the (A/T arrow) buttons to select 3D, and then press the 
OK button. 

3 Press the (A/T arrow) buttons to select 3D Important Info, 
and then press the OK button. 

Adjusting 2D to 3D depth 

With this feature, you can adjust the level of 3D depth. 

Within the Menu: 

1 Press the MENU button. 

2 Use the (A/T arrow) buttons to select 3D, and then press the 
OK button. 

3 Press the (A/T arrow) buttons to select 2D to 3D Depth. 

4 Press the (^/^ arrow) buttons to select either 1, 2, 3, 4, or 5, 

and then press the OK button. 

Within the Quick menu: 

1 Press the QUICK button in 2D to 3D mode. 

2 Press the (A/T arrow) buttons to select 3D Settings, and then 
press the OK button. 

3 Press the (A/T arrow) buttons to select 2D to 3D Depth. 

4 Press the (^/^ arrow) buttons to select either 1, 2, 3, 4, or 5, 

and then press the OK button. 


Basic features 

Tuning Channels 


85 


Switching left and right images 

The left and right images of the glasses can be swapped. If 3D 
images look blurry, switch the left and right sides of the 3D image. 

1 Press the QUICK button to open the Quick menu. 

2 Press the (A/T arrow) buttons to select 3D Settings, and then 
press the OK button. 

3 Press the (A/T arrow) buttons to select Left and Right 

Image. Press the arrow) buttons to select Swapped. 

Tuning Channels 

Tuning to the next programmed channel 

Press the CH Up/Down arrow buttons on the remote control or TV 
control panel. 

Tuning to a specific channel (programmed or unprogrammed) 


Channel: Description: 


Analog Use the 0-9 buttons on the remote control. (For example, to select channel 
125, press 1,2,5.), and then press the OK button. 


Digital Use the 0-9 buttons on the remote control to enter the major channel 

number. Press the DASH button, (For example, to select digital channel 
125-1, press 1 ,2, 5, -, 1.), and then press the OK button. 


Using Channel Return 

You can switch between two channels without entering a channel 
number each time. This feature also works for external inputs. 

1 Select the first channel you want to view. 

2 Select a second channel using the Channel Number buttons 
(and press the DASH button if needed). 

3 Each time you press the CH RTN button, the TV switches 
between the last two channels that were tuned. 

Using SurfLock™ 

The SurfLock™ feature temporarily programs one channel to the 
CH RTN button so that you can quickly return to it from any other 
channel. This feature also works for external inputs. 






86 


Basic features 

Selecting the video input to view 


To temporarily program the CH RTN button with a particular 
channel: 

1 Tune to the channel you wish to program to the CH RTN 
button. 

2 Press and hold the CH RTN button for approximately 4 
seconds until the message “Memorized” appears. The channel 
has been programmed to the CH RTN button. 

3 You can then change channels repeatedly, and when you press 
the CH RTN button, the memorized channel is tuned to. 

After pressing the CH RTN button and then changing channels 
again, the memory is cleared and the button functions as Channel 
Return. 

Selecting the video input to view 

To select the video input to view: 

1 Press the INPUT button on the remote control or TV control 
panel. 

2 Change the input: 

❖ Press 0-8. 

❖ Repeatedly press the (A/V arrow) buttons, and then press 
the OK button. 

❖ Repeatedly press the INPUT button. 


Inputs 

0 

ANT/CABLE 

1 

Video 1 

2 

Video 2 

3 

ColorStream HD1 

4 

HDMI1 

5 

HDM 2 

6 

HDM 3 

7 

HDM 4 

8 

PC 













Basic features 

Using dosed captions 


87 


NOTE 


You can label the video input sources according to the specific 
devices you have connected to the TV, see "Labeling video 
inputs" on page 70. 

You can skip sources, see “Skipping video inputs” on page 68. 

Inputs that are set to be skipped will be skipped when selecting 
by repeatedly pressing the INPUT button or the (A/T arrow) 
buttons. 

You can select inputs that are set to be skipped using the 
number buttons. 

If one or more HDMI® CEC devices are connected to an HDMI® 
input, the icon appears in the input selector. In this case, the 
label, see "Labeling video inputs” on page 70 will not appear in 
the input selector. 


To select an HDMI® CEC device: 

1 Press the (A/T arrow) buttons to select an HDMI® input. 

2 Press the (► arrow) button. The list of HDMI® CEC devices 
for that input appears. 

3 If the input has multiple HDMI® CEC devices, use the (A/T 
arrow) buttons to select a device. 

4 Press the OK button. 

Using closed captions 

To turn on the closed caption mode: 

1 Press the MENU button. Select SETTINGS, SETUP, TV 
Settings, and then press the OK button. 

2 Press the (A/T arrow) buttons to select Closed Captions, and 
then press the OK button. 

3 Press the (A/T arrow) buttons to select Closed Captions 
Display. 

4 Press the (^/ ► arrow) buttons to select On or Off. 

NOTE If Closed Captions Display is set to Off, Analog CC Mode and Digital 
CC Settings will be not available. 


Analog CC mode 

The closed caption mode has two options: 







88 

Basic features 

Using closed captions 



Mode: 

Description: 

Captions 

Displays the dialogue, narration, and sound effects of TV programs and 
videos that are closed captioned (usually marked “CC” in program guides). 

Text 

Displays information not related to the current program, such as weather or 
stock data (when provided by individual stations). 


To view captions or text: 

1 Press the MENU button. Select SETTINGS, SETUP, TV 
Settings, and then press the OK button. 

2 Press the (A/Y arrow) buttons to select Closed Captions, and 
then press the OK button. 

3 Press the (A/Y arrow) buttons to select Analog CC Mode. 

To view captions: 

Press the arrow) buttons to highlight CC1, CC2, CC3, 
or CC4. 



(Sample Illustration) Captions 


NOTE 


If the program or video you have selected is not closed captioned, no 
captions will be displayed. 











Basic features 

Using dosed captions 


89 


To view text: 

Press the arrow) buttons to highlight Tl, T2, T3, or T4. 



(Sample Illustration) Captions - text 


note If text is not available in your area, a black rectangle may appear on 
the screen. You can remove this rectangle by setting Closed 
Captions Display to Off. 


note A closed caption signal may not be displayed when a videotape 
is dubbed, signal reception is weak, or signal reception is 
non-standard. 


Digital CC settings 

You can customize the closed caption display characteristics. 

note ❖ These settings are available for digital channels only. 

❖ You cannot set Caption Text and Background as the same color. 


Mode: 

Description 

Caption size 

Auto, Small, Standard, Large 

Caption text type 

Mono (with Serif), Prop, (with Serif), Mono (without Serif), Prop, 
(without Serif), Casual, Cursive, Small Capitals 

Caption text edge 

Auto, None, Raised, Depressed, Uniform, Left Drop Shadow, 

Right Drop Shadow 

Caption text color 

Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan 

Text foreground opacity 

Auto, Transparent, Translucent, Flashing, Solid 

Background color 

Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan 

















Basic features 

Using closed captions 




Mode: 

Description 

Text background opacity 

Auto, Transparent, Translucent, Flashing, Solid 

Caption text edge color 

Auto, Black, White, Red, Green, Blue, Yellow, Magenta, Cyan 


To customize the closed captions: 

1 Press the MENU button. Select SETTINGS, SETUP, TV 
Settings, and then press the OK button. 

2 Press the (A/T arrow) buttons to select Closed Captions, and 
then press the OK button. 

3 Press the (A/T arrow) buttons to select Digital CC Settings, 
and then press the OK button. 

4 Press the (A/T arrow) buttons to select a characteristic. Press 
the (4/^ arrow) buttons to select the format for that 
characteristic. 

Using the Closed Caption button 

If you press the CC button when an analog channel is tuned or from 

an external input (480i signal from the video input): 

❖ The CC bar will appear and will display the options, CC1-4, 
Tl-4. 

If you press the CC button when a digital channel is tuned: 

❖ The CC bar will appear and will display the available caption 
options for that channel or service. 

Setting the PIN code 

A PIN code is necessary for some menus. 


NOTE 


The Parental Control and Locks menu is grayed out if no PIN has 
been set. 







Basic features 

Using parental controls 


91 


Entering a new PIN code 

1 Press the MENU button. Select SETTINGS, 
PREFERENCES, Parental PIN, and then press the OK 
button. 

2 Use the number buttons to enter a 4-digit number, and then 
confirm the code. 

note The PIN code cannot be set to “0000". 

Changing or deleting your PIN code 

1 Press the MENU button. Select SETTINGS, 
PREFERENCES, Parental PIN, and then press the OK 
button. 

2 Use the number buttons to enter your 4-digit PIN code. 

3 Select Change PIN or Delete PIN, and then press the OK 
button. 


note ❖ The PIN code cannot be set to “oooo". 

❖ If you delete the PIN code, the settings of Parental Controls and 
Locks are reset. 


Forgotten PIN code 

1 Press the MENU button. Select SETTINGS, 
PREFERENCES, Parental PIN, and then press the OK 
button. 

2 Press the INFO button 4 times within 5 seconds. The code is 
cleared. 

3 Enter a new PIN code. 

Using parental controls 

Blocking TV programs and movies by rating (V-Chip) 

Some TV programs and movies include signals that classify the 
content of the program (as unsuitable for younger viewers). The 
V-Chip feature in this TV detects the signals and blocks the 
programs according to the ratings you select. 





Basic features 

Using parental controls 


N ot E The V-Chip feature in this TV supports the U.S. V-Chip system only. 

1 Press the MENU button. Select SETTINGS, 
PREFERENCES, Parental Control and Locks, and then 
press the OK button. 

2 Enter your 4-digit PIN code. 

3 Press the {A/Y arrow) buttons to highlight Enable Rating 
Blocking. 

4 Press the (► arrow) buttons to select On. 

5 Press the (A/Y arrow) buttons to select Edit Rating Limits, 
and then press the OK button. 

The Edit Rating Limits screen appears. 

6 Press the (A/▼/arrow) buttons. 

7 Press the OK button to select a level of blocking. 

A box with an “X” indicates a rating that will be blocked. As 
you highlight a rating, the rating’s definition appears at the 
bottom of the screen. 


N ote This feature will not be available if no PIN code is set. 


Downloading an additional rating system 

An additional rating system may be available for use in selectively 
blocking TV programs and movies. 


N ot E The currently tuned station must be receiving a digital signal before 
an additional rating system can be downloaded. 

1 Press the MENU button. Select SETTINGS, 
PREFERENCES, Parental Control and Locks, and then 
press the OK button. 

2 Enter your 4-digit PIN code. The Parental Control and Locks 
screen appears. 

3 Press the (A/▼ arrow) buttons to highlight Enable Rating 
Blocking. 

4 Press the (► arrow) buttons to select On. 






Basic features 

Using parental controls 


5 

6 

Press the (A/Y arrow) buttons to select Edit Rating Limits, 
and then press the OK button. 

The Edit Rating Limits screen appears. 

Select Alt RS, and then press the OK button. 

The Edit Alternate Ratings screen appears. 

NOTE 

❖ The Alt RS button is only available if an additional rating system 
is currently available. 

❖ The download may take several minutes. 

❖ The information displayed on the Alternate Ratings screen 
depends on the configuration of the additional rating system 
available at the time of download. 

7 

Press the (A/Y/^/^ arrow) buttons. 

8 

Press the OK button to select the desired level of blocking. A 
box with an “X” indicates the rating that will be blocked. 

NOTE 

❖ You can only download the additional rating system once. You 
cannot download updates if they become available. 

❖ The additional rating system is not designed, transmitted, or 
controlled by the TV or Toshiba, nor is the availability of an 
additional rating system determined or controlled by Toshiba. 
Similarly, the rating of programs in an additional rating system is 
not determined, transmitted, or controlled by the TV or Toshiba. 

❖ The additional rating system is an evolving technology; 
therefore, availability, content, and format may vary. 

Rating system 

Independent rating system for broadcasters: 

Ratings: 

Description and Content themes: 

TV-MA 

Mature Audience Only (This program is specifically designed to be viewed 
by adults and therefore may be unsuitable for children under 17. L) Crude or 
indecent language S) Explicit sexual activity V) Graphic violence 

TV-14 

Parents Strongly Cautioned (This program contains some material that 
many parents would find unsuitable for children under 14 years of age.) 

D) Intensely suggestive dialogue L) Strong, coarse language S) Intense 
sexual situations V) Intense violence 









Basic features 

Using parental controls 



Ratings: 

Description and Content themes: 

TV-PG 

Parental Guidance Suggested (This program contains material parents may 
find unsuitable for younger children.) D) Some suggestive dialogue 

L) Infreguent coarse language S) Some sexual situations V) Moderate 
violence 

TV-G 

General Audience (Most parents would find this program suitable for all 
ages.) 

TV-Y7, 

TV-Y7FV 

Directed to Older Children (This program is designed for children age 7 and 
above. 


NOTE: Programs in which fantasy violence may be more intense or more 
combative than other programs in this category are designated TV-Y7FV.) 

TV-Y 

All Children (This program is designed to be appropriate for all children.) 

Independent rating system for movies 

Ratings: 

Description and Content themes: 

X 

X-rated (For adults only) 

NC-17 

Not intended for anyone 17 and under 

R 

Restricted (Under 17 requires accompanying parent or adult) 

PG-13 

Parents Strongly Cautioned (Some material may be inappropriate for 
children under 13) 

PG 

Parents Strongly Cautioned (Some material may be inappropriate for 
children under 13) 

G 

General Audience (Appropriate for all ages) 

Indication other than rating system 

Display: 

Description: 

NONE 

The program is rated None. 

(No rating appears) No rating information is provided. 



note If you place an “X” in the box next to “Rated “None””, programs rated 
“None” or “Not Rated” will be blocked; Programs that do not provide 
any rating information will not be blocked. 





















Basic features 

Locking specific channels 


95 


Displaying ratings 

To display the rating of the program you are watching, press the 
INFO button on the remote control. 


Unlocking programs 

If you try to tune to a program that exceeds the rating limits you 
have set, the TV will enter program lock mode and a warning 
message will appear on screen. Follow the instructions to 
temporarily unlock the program. 


Locking specific channels 

A channel that is configured as Locked cannot be viewed unless the 
PIN code is entered first, see “Setting the PIN code” on page 90. 

1 Press the MENU button. Select SETTINGS, SETUP, TV 
Settings, and then press the OK button. 

2 Press the {A/"W arrow) buttons to select Channel Options, and 
then press the OK button. 

The list of channels appears. 



(Sample Illustration) Channel options 


3 Press the (► arrow) button and then the (A/T arrow) buttons 
to select a channel in the lock column, and then press the OK 
button. 

4 You must enter your PIN code to lock channels. 


note If no PIN code has been set, a warning appears. See, “Setting the PIN 
code” on page 90. 


5 The box is selected. To clear the selection, press the OK 
button. 










Basic features 

Locking specific channels 


Locking video inputs 

You can lock video inputs and channels 3 and 4. You cannot view 
the input sources or channels until you unlock the inputs by 
entering the PIN code. 

1 Press the MENU button. Select SETTINGS, 
PREFERENCES, Parental Control and Locks, and then 
press the OK button. 

2 Enter your 4-digit PIN code. 

3 Press the (A/Y arrow) buttons to highlight Input Lock. 

4 Press the (^/ ► arrow) buttons to select Video, Video+, or Off. 


Mode: 

Description: 

Video 

Locks Video 1, Video 2, ColorStream HD1, HDM11, HDMI2, HDMI3, 
HDMI4, and PC. 

Video+ 

Locks Video 1, Video 2, ColorStream HD1, HDM11, HDMI 2, HDMI 3, 

HDMI 4, PC, and channels 3 and 4. 

Select Video+ if you want to play video tapes via the ANT/CABLE input. 

Off 

Unlocks all video inputs and channels 3 and 4. 


Setting a time limit for games 

You can use the GameTimer® to set a time limit for playing a video 

game. When the time expires, the TV locks all external inputs. 

1 Press the MENU button. Select TIMERS, GameTimer, and 
then press the OK button. 

2 Enter your 4-digit PIN code. 

3 Press the (► arrow) buttons to select 30, 60, 90, or 120 
minutes. 

4 To cancel the timer, select Off. 

To deactivate the Input Lock once the GameTimer® has activated it: 

❖ Set the Input Lock to Off, see “Locking video inputs” on 
page 96. 







Basic features 

Using HDMI® CEC Control 


97 


NOTE ❖ A message appears when 10 minutes, 3 minutes, and 1 minute 
are remaining. 

❖ If the TV loses power with time remaining, the TV will enter Input 
Lock mode when power is restored (as if the GameTimer had 
been activated). You must deactivate the Input Lock, see 
“Locking video inputs” on page 96. 


Locking the control panel 

You can lock the control panel to prevent your settings from being 
changed accidentally (by children, for example). When Panel Lock 
is set to On, none of the controls on the control panel operate 
except POWER. 

1 Press the MENU button. Select SETTINGS, 
PREFERENCES, Parental Control and Locks, and then 
press the OK button. 

2 Enter your 4-digit PIN code. 

3 Press the ( A/T arrow) buttons to select Panel Lock. 

4 Press the arrow) buttons to select On. 


note When Panel Lock is set to On, “Panel Lock” appears on screen when 
the buttons on the TV control panel are pressed. If the POWER button 
is pressed, the TV turns off and you must use the remote control to 
turn it on. 

To unlock the control panel: 

❖ Select Off in Step 4 above. 

Using HDMI® CEC Control 

This feature uses CEC technology and allows you to control 
Toshiba HDMI® CEC compatible devices from the TV remote 
control via HDMI® connection. 

When Enable HDMI® CEC Control in the HDMI® CEC Control 
Setup menu is set to On, the following HDMI® CEC Control 
functions are enabled. 






98 


Basic features 

Using HDMI® CEC Control 


To set HDMI® CEC Control Setup 


1 

Press the MENU button. Select SETTINGS, 

2 

PREFERENCES, HDMI® CEC Control Setup, and then 
press the OK button. 

Press the {A/'T arrow) buttons to highlight Enable 

HDMI CEC Control. 

3 

Press the (► arrow) buttons to select On. 

NOTE 

If you set Enable HDMI® CEC Control to Off, the other items under 
HDMI® CEC Control Setup will be grayed out. 

4 

Press the (A/T arrow) buttons to select an item. Press the 
(A/^ arrow) buttons to select On or the desired mode: 

❖ TV Auto Power: On/Off 

❖ Auto Standby: On/Off 

❖ Amplifier Control: On/Off 

❖ Speaker Preference: TV Speakers/Amplifier 

NOTE 

These functions depend on the connected devices. 


Controlling HDMI® CEC playback devices 

With your TV's remote control, you can control the connected 
HDMI® CEC playback device (DVD player, etc.) you are watching. 


Button: 

■ | 

Description: 

Begins playback 

Stops playback 

■■/■■►I 

Pauses the picture during play or record mode 

| 

A short press fast-forwards, and a long press skips forward. 


A short press rewinds, and a long press skips backward. 

►► | 

Fast forward 

« | 

Bewi nd/reverse 





















Basic features 

Using HDMI® CEC Control 



Button: 

Description: 

AY^ ► 

Menu navigation, etc. 

ok| Enters content with a menu 

RED, GREEN, 

YELLOW, 

BLUE 

Controls various operation 

0-9 buttons 

Channel 

Up/Down 

Changes to the next available channel up or down in the sequence 


NOTE 

These functions depend on the connected devices. 


HDMI® CEC Player Control menu functions 

1 Press the QUICK button to open the Quick menu. 

2 Select HDMI® CEC Player Control, and then press the OK 
button. 

3 Press the (A/T arrow) buttons to select the item you want to 
control, and then press the OK button. 


Item: 

Description: 

Power 

Turns the selected device On and Off 

Root Menu 

Accesses the selected device’s top menu 

Content Menu 

Accesses the content list when the OK button is pressed 

Setup Menu 

Accesses the device’s setup menu 
















100 


Basic features 

Using HDMt CEC Control 


N ot E These functions depend on the connected devices. 

The HDMI® CEC Player Control item is not available under the 
following conditions: 

❖ A non-HDMI® input is selected 

❖ The Enable HDMI® CEC Control item is set to Off 

❖ The connected HDMI® CEC device is not a playback or 
recording device 

HDMI® CEC Control input source selection 

If an HDMI® CEC device with HDMI® switching capability 
(e.g. an amplifier) is connected to the HDMI® input, you can select 
another HDMI® CEC device that is connected to the master HDMI® 
device. 

Use the INPUT button on the remote control or the control panel, 
see “Learning about the remote control” on page 49. 

Adjusting the amplifier’s audio 

Using the TV’s remote control, you can adjust or mute the sound 
volume of your amplifier. 

❖ The VOL (+ -) buttons adjust the volume level. 

❖ The MUTE button turns off the sound. 

1 Press the MENU button. Select SETTINGS, 
PREFERENCES, HDMI® CEC Control Setup, and then 
press the OK button. 

2 Press the (A/T arrow) buttons to highlight Speaker 
Preference. 

3 Press the (► arrow) buttons to select Amplifier. 


N OT E Confirm that a connected HDMI® CEC device (such as DVD player, 
etc.) is selected for the Amplifier input source. 


note ❖ You can also use this function when the amplifier is connected to 
the TV’s DIGITAL AUDIO OUT terminal (not HDMI® connection). 
Select a digital audio input mode on the amplifier. 

❖ These functions depend on the device connected. 





Basic features 

Using the HDMI® RGB Range feature 


Other HDMI® CEC Control functions 

When Enable HDMI® CEC Control and all items in the 

HDMI® CEC Control Setup menu are set to On, the following 
functions will be enabled: 

Item: 

Description: 

TV Auto Power 

If a HDMI® CEC device is turned on, the TV turns on automatically. 

Auto Standby 

If the TV is turned off, it will send a message to turn off all of the 

HDMI® CEC devices connected to the TV. 

Amplifier 

If Amplifier Control is set to On, you can adjust the sound volume or 
turn off the sound using the remote control. 

Speaker Preference 

With this item, you can set your audio output preference to the TV 
speakers or the amplifier. When this item is set to Amplifier, the remote 
control can be used to adjust or mute the volume of the audio. This 
item will not be available and set to TV Speakers automatically unless 
a HDMI® CEC compatible audio receiver is connected. 


NOTE 

When you turn on the amplifier, change its input source, or adjust the 
sound volume, the sound will be output from the amplifier’s speakers 
even if TV Speakers has been selected. Turn the TV off and on again 
to output the sound from the TV speakers. 

Using the HDMI® RGB Range feature 

Item: 

Description: 

RGB Range: Auto 

Adjusts the RGB full range signal automatically. When Limited is 
selected, the RGB output signal is output in the range of 16 to 235. 
When Full is selected, the RGB output signal is output in the range of 0 
to 255. 


The RGB Range setting requires appropriate HDMI® source 
devices. If your HDMI® source device does not support this feature, 
the TV may not work properly when it is enabled. 












102 


Basic features 

Viewing the HDMI® signal information 


N OT E If your HDMI® connection is capable of 1080p and/or your TV is 

capable of refresh rates greater than 60 Hz, you will need a High 
Speed HDMI® cable. Conventional HDMI®/ DVI cables may not work 
properly with this mode. 

Select the appropriate HDMI® input mode (HDMI 1, HDMI 2, 
HDMI 3, or HDMI 4): 

1 Press the MENU button. Select SETTINGS, 
PREFERENCES, AV Connection, and then press the OK 
button. 

2 Press the (A/Y arrow) buttons to select HDMI RGB Range, 
and then press the OK button. 

3 Press the (► arrow) buttons to select a setting. 

Viewing the HDMI® signal information 

1 Press the MENU button. Select SETTINGS, 
PREFERENCES, HDMI Information Display. 

2 Press the (► arrow) buttons to select On. Press the INFO 
button. 

The normal banner and signal information banner appear. 


note ❖ The signal information banner will appear when this feature is 
set to On and you watch an HDMI® input. 

❖ If you press the INFO button when this feature is set to Off, only 
the normal banner will appear. 


Using your computer with the TV 

Adjusting the image 

If the edges of the picture are hidden, readjust Horizontal Position 
and Vertical Position. If the picture is affected by interference, 
readjust Clock Phase and Sampling Clock. 

1 Select PC input mode, see “Selecting the video input to view” 
on page 86. 

2 Press the MENU button. Select SETTINGS, 
PREFERENCES, Display Settings, and then press the OK 
button. 



Basic features 

Using your computer with the TV 


103 


3 Press the (A/Y arrow) buttons to select PC Settings, and then 
press the OK button. 


note If a computer is not connected or there is no PC input signal, this 
menu will not be available. 


4 Press the (A/Y arrow) buttons to select an item. 

5 Press the arrow) buttons to make adjustments. 


NOTE 

The screen is disrupted momentarily when adjusting the PC settings. 
This is not a sign of malfunction. 




Mode: 

Description: 

Adjustment Range 

Horizontal Position 

Moves the picture left/right 

Within ±10 from center* 

Vertical Position 

Moves the picture up/down 

Within+10 from center* 

Clock Phase 

Helps to reduce noise and sharpen 
the picture 

Within ±15 from center* 

Sampling Clocks 

Helps to reduce noise and minimize 
periodic vertical stripes on the screen 

Within ±5 from center* 


* The default settings and/or adjustment ranges vary depending on the input 
signal format. 

To reset the PC Settings: 

Select Reset, and then press the OK button. 

Setting the computer audio 

You can output sound from your computer when connecting it to 
your TV, using the AUDIO IN terminal and PC audio cable. 

1 Press the MENU button. Select SETTINGS, 
PREFERENCES, AV Connection, and the press the OK 
button. 

2 Press the (A/Y arrow) buttons to select PC/HDMI 4 Audio. 

3 Press the (^/^ arrow) buttons to select PC. 

To select PC, set Shared PC Audio to PC. 


NOTE 












Basic features 

Setting the timer to turn on the TV 


Setting the timer to turn on the TV 

You can set the on timer to turn on the TV to a preset channel or 
input at a preset time. 

To activate the timer: 

1 Press the MENU button. Select TIMERS, On Tinier, and 


2 

3 

then press the OK button. 

Press the {A/Y arrow) buttons to select Enable On Tinier. 
Press the (► arrow) buttons to select On. 

NOTE 

If the Enable On Timer is set to Off, other menus under On Timer 
cannot be changed. 

It can take the TV approximately 60 seconds to turn on through the 
ON TIMER feature. 

To set the timer: 

1 

Press the MENU button. Select TIMERS, On Tinier, and 
then press the OK button. 

2 

Set these options to your preference: 

Item: 

Description: 

Input 

Video input source 

Channel 

Channel to view 

Volume 

Volume level 

Time until Power On Desired length of time until the TV turns on: 

minimum=00:10, maximum=12:00 

Press the ( 4 /► arrow) buttons 

Use the number buttons 

3 

Select Done, and then press the OK button. 

NOTE 

If you do not operate the TV for 1 hour after it is powered on by the 
On Timer feature, it turns off. 


To cancel the timer: 

1 Press the MENU button. Select TIMERS, On Tinier, and 
then press the OK button. 










Basic features 

Setting the sleep timer 


105 


2 Press the (A/T arrow) buttons to select Enable On Tinier. 

3 Press the arrow) buttons to select Off. 

Setting the sleep timer 

You can set the TV to turn off after a specific amount of time 
(maximum = 12 hours). 

Using the remote control: 

1 Press the SLEEP button. 

2 Set the amount of time until the TV turns off. 

❖ Repeatedly press the SLEEP button to increase the time. 

❖ Press the ( A/T arrow) buttons to increase or decrease the 
time. 

Using the onscreen menus: 

1 Press the MENU button. Select TIMERS, Sleep Timer, and 
then press the OK button. 

2 Select the amount of time until the TV turns off. 

❖ Use the number buttons. 

❖ Press the (A/T arrow) buttons to increase or decrease the 
time. 

NOTE If a power failure occurs, the sleep timer setting may be cleared. 

To display the time remaining until the TV turns off, press the 
SLEEP button. 

To cancel the sleep timer, press the SLEEP button repeatedly or 
press the (A/T arrow) buttons until it is set to 0 minutes. 

NOTE When the following features are set, the feature that is set for the 
nearest time will function. 

❖ Sleep Timer 

❖ Auto shutdown after 1 hour of inactivity (after powering on by On 
Timer) 

❖ No signal auto power off (after 15 minutes of no signal) 





Basic features 

Setting No Signal Power Down 


Setting No Signal Power Down 

When an input's setting in this feature is set to On, The TV will 

automatically turn itself off after 15 minutes if no signal is detected. 

You can change each input's setting to Off: ANT/CABLE, Video 1, 

Video 2, ColorStream HD1, ColorStream HD2, HDMI1, HDMI 2, 

HDMI 3, HDMI 4, or PC. 

1 Press the MENU button. Select SETTINGS, 
PREFERENCES, Power Management, and then press the 
OK button. 

2 Press the (A/Y arrow) buttons to select No Signal Power 
Down, and then press the OK button. 

3 Press the (A/Y arrow) buttons to highlight the item you want 
to change. 

4 Press the (► arrow) buttons to select On or Off. Press the 
EXIT button. 

note ❖ Default setting for each input is On. 

❖ A warning message will appear 1 minute before turning off. 


Displaying TV status information 

To display TV status information, press the INFO button. 

The following information will be displayed (if applicable): 

❖ Current input (ANT/CABLE, Video, etc.) 

❖ Either “CABLE” (for cable TV) or “ANT” (for over-the-air 
broadcasts), if ANT/CABLE is the current input 

❖ Channel number (if in ANT/CABLE mode) 

❖ Input label (if set) 

❖ Digital signal strength indicator (bar graph in lower right 
corner of box; for ATSC signals only) 

❖ Stereo, Mono, or SAP audio status (when in HDMI® input 
mode, PCM) 

❖ Video resolution 

❖ Aspect ratio of incoming video signal (4:3 or 16:9) 

❖ V-Chip rating status (if available) 

❖ GameTimer (if set) 



Basic features 

Viewing support information 


107 


❖ Channel Label (if set or received) 

❖ Current display mode (Side by Side, Top and Bottom, or 
Frame Packing) 

❖ Current display format (2D to 3D, or 3D to 2D) 

❖ Input video format (3D appears when video format is 3D) 

To close the screen, press the INFO button again. 

The following additional information (only available for 
ANT/CABLE input) will display for off-air digital channels (if 
applicable): 

❖ Title 

❖ Duration 

❖ Detailed description 

To display the next program’s information for digital channels, 
press the INFO button again. Pressing the INFO button a third time 
will remove the entire banner. 


ANT 

CD 1 SVGA| fie*] 1 3D 1 NONE 

2-2 

Nashville WX Channel 8;59am - 4;59pm EST 

: rm i 

Naahv le WX Channel p'ovtcao Middle ^onoeeoe end Southern Kentucky 
metier. 


(Sample Illustration) Banner 


Viewing support information 

1 Press the MENU button. Select GET HELP, System 
Information. 

2 Press the OK button to display support information containing 
Web/Customer service numbers for US, Canada, and Mexico. 

Resetting to Factory Defaults 

You can reset all settings and channels. 

1 Press the MENU button. Select SETTINGS, SETUP, Reset 
TV, and then press the OK button. 

2 Enter your PIN code (if a PIN code has been set). 

3 A confirmation screen appears. Select Yes, and then press the 
OK button. 

The TV will turn off automatically. 


To cancel the reset: 







108 


Basic features 

Power failure 


❖ Press the (4/^ arrow) buttons to select No, and then press the 
OK button. 

Power failure 

If power is lost while you are watching the TV, the Last Mode 
Memory feature automatically turns on the TV when power is 
restored. 


Chapter 7 


Picture and Sound 
Controls 


Selecting the picture size 

You can view many program formats in several picture sizes— 
Native, 4:3, Full, TheaterWide 1, TheaterWide 2, TheaterWide 3, 
Normal, and Dot by Dot. 


note The picture size illustrations are examples only. The format of the 
image (in any of the picture sizes) depends on the format of the 
signal you are currently watching. Select the picture size that 
displays the current program in the way that looks best to you. 

You can save separate picture size preferences for each input on 

your TV. 

To select the picture size: 

1 Press the PIC SIZE button. 

2 While the Picture Size screen is open, repeatedly press the PIC 
SIZE button. 


109 



110 


Picture and Sound Controls 

Selecting the picture size 


NOTE 


❖ Using these functions to change the picture size (i.e., changing 
the height/width ratio) for any purpose other than your private 
viewing may be prohibited under the Copyright Laws of the 
United States and other countries, and may subject you to civil 
and criminal liability. 

❖ There will be restrictions on the Picture Size settings for 2D to 
3D mode, 3D mode, and 2D mode. 

❖ Some picture sizes may not be available depending on the 
format of the signal being received. 

❖ If you select a TheaterWide® picture size, the top and bottom 
edges of the picture (including subtitles or captions) may be 
hidden. To view these edges, adjust the Picture Position or try 
viewing the program in 4:3 or Fuii, see “Scrolling the picture” on 
page 113. 


Native 

These settings are for viewing in 480i (HDMI®), 480p (HDMI®), 
720p, 1080i, and 1080p signal programs). 




(Sample Illustration) Picture size - Native 

❖ If receiving a 1080i, 1080p, 720p, 480i (HDMI®), or 480p 
(HDMI®) signal program, the video is scaled to display the 
entire picture within the borders of the screen (i.e. no 
overscanning). 

❖ This is especially useful for external HD sources such as 
DVHS movies, Video Games, or computer graphics. 

❖ None of the picture is hidden. 


❖ This mode is supported only for HDMI® (1080i, 1080p, 720p, 
480i, and 480p), ColorStream® (1080i and 720p), and 
ANT/CABLE (digital) inputs (1080i, 1080p, and 720p). 

❖ Depending on the input signal, the picture’s border may be 
hidden, displayed in black, or noisy. 


J O C 

0 o c 


o o o 
o o o 


NOTE 







Picture and Sound Controls 

Selecting the picture size 


111 


4:3 




(Sample Illustration) Picture size - 4:3 

Some program formats will display with sidebars and/or bars at the 
top and bottom. 


Full 


This setting is for viewing in the 16:9 (480i, 480p) source programs 
only. 




(Sample Illustration) Picture size - Full 16:9 

If receiving a squeezed 4:3 format program, the picture is stretched 
horizontally to fill the width of the screen hut not stretched 
vertically. 

This setting is for viewing in the 1080i, 1080p, and 720p program 
source. 


0 0 0 
0 0 0 


o o o 
o o o 



(Sample Illustration) Picture size - Full 
The edges of the picture may be hidden. 














112 


Picture and Sound Controls 

Selecting the picture size 


TheaterWide 1 

This setting is for viewing in 4:3 format programs. 



(Sample Illustration) Picture size - TheaterWide 1 

The center of the picture remains close to its original proportions, 
but the left and right edges are stretched horizontally to fill the 
screen. 

TheaterWide 2 

This setting is for viewing letter box programs. 


(Sample Illustration) Picture size - TheaterWide 2, letter box 
The picture’s top and bottom edges may be hidden*. 

TheaterWide 3 

This setting is for viewing letter box programs with subtitles. 


o o o 
o o o 


O O O 

o o o 





O O O 
O O O 


(Sample Illustration) Picture size - TheaterWide 3, letter box with 
subtitles 


The picture’s top and bottom edges are hidden*. 












Picture and Sound Controls 

Scrolling the picture 


113 


Normal 


This setting is for viewing SVGA, XGA, WXGA, and SXGA 
sources. 



(Sample Illustration) Picture size - Normal 

This size is a non-stretched display. Some input signal formats will 
display with sidebars and/or bars at the top and bottom. 

Dot by Dot 

This setting is for viewing SVGA, XGA, WXGA, and SXGA 
sources. 



(Sample Illustration) Picture size - Dot by Dot 

“Dot by Dot” is a non-scaling display. Depending on the input 
signal format, the picture appears with sidebars and/or bars at the 
top and bottom, for example, SVGA input source). 

* To view the hidden areas (such as subtitles or captions), see 
“Scrolling the picture” on page 113. 

Scrolling the picture 

If the edges of the picture are hidden, you can adjust the image’s 
position. 


note ❖ You can adjust the picture position when the picture size is set to 
TheaterWide 2 or TheaterWide 3. 

❖ When viewing ePORTAL, MediaShare (Media Player), or Internet 
content this feature is not available. 


1 Press the MENU button. Select SETTINGS, 

PREFERENCES, Display Settings, and then press the OK 
button. 








114 


Picture and Sound Controls 

Using the Auto Aspect feature 


2 Press the (A/T arrow) buttons to select Picture Position, and 
then press the OK button. 

3 Press the {A/'T arrow) buttons to select Vertical Position. 

4 Press the (► arrow) buttons to make the appropriate 
adjustments. 

The adjustment range is from -5 to +10. 

Using the Auto Aspect feature 

When this feature is set to On, the TV will automatically select the 

picture size when one of the following input sources is received: 

❖ 480i, 480p, 720p, 1080i digital signal from the ANT/CABLE 
input 

❖ 480i signal from the ColorStream HD or Video input 

❖ 480i, 480p, 720p, 1080i, 1080p, or VGA (60/72/75 Hz) signal 
from the HDMI® 1/2/3/4 input 


N ot E The auto aspect ratio feature is not applicable to the PC input. 

1 Press the MENU button. Select SETTINGS, 
PREFERENCES, Display Settings, and then press the OK 
button. 

2 Press the (A/T arrow) buttons to select Auto Aspect. 

3 Press the (^/^ arrow) buttons to select On. Press the EXIT 
button. 

Using the 4:3 Stretch 

When 4:3 Stretch is activated, the TV displays 4:3 programs as a 
full-screen picture. 


N ot E This feature is available when Auto Aspect is set to On. 

1 Press the MENU button. Select SETTINGS, 
PREFERENCES, Display Settings, and then press the OK 
button. 

2 Press the (A/T arrow) buttons to select 4:3 Stretch. 

3 Press the (^/ ► arrow) buttons to select On. Press the EXIT 
button. 




Picture and Sound Controls 

Adjusting the picture 


115 


Adjusting the picture 
Selecting the picture mode 

You can select your desired picture settings from the modes 
described below. 


Mode: 

Description: 

AutoView® 

Automatically adjusts picture settings based on ambient light 
conditions and input signal content 

Dynamic 

Bright and dynamic picture 

Standard 

Standard picture settings 

Movie 

Lower contrast for a darkened room 

Game 

Designed for playing a video game reguiring split-second timing 
between the screen display and input from the controller 

PC 

Designed for the viewing of computer tables and documents 


NOTE 

PC mode is available for HDMI® and PC inputs only (not displayed 
for other input sources). 

1 

Press the MENU button. Select SETTINGS, PICTURE, 
Picture Mode. 

2 

Press the arrow) buttons to select a mode. Press the 

EXIT button. 


note The picture mode you select affects the current input only. You can 
select a different picture mode for each input. 


Adjusting the picture quality 

The adjustments you make to picture quality under a picture mode 
are saved to that picture mode. 


Selection 

Pressing (4) 

Pressing (►) 

Backlight* 

Darker 

Lighter 

Contrast 

Lower 

Higher 

















Picture and Sound Controls 

Adjusting the picture 



Selection 

Pressing (^) 

Pressing (►) 

Brightness 

Darker 

Lighter 

Color 

Paler 

Deeper 

Tint 

Reddish 

Greenish 

Sharpness 

Softer 

Sharper 

* Backlight: Adjusts the brightness of the entire screen. When in video mode 
and no signal is input, this selection is set to 0. (Settings are stored in 
memory.) 



NOTE 

Some settings cannot be adjusted in the following cases: 

❖ AutoView is selected 

❖ TheaterLock is set to On 

To 

adjust the picture quality: 

1 

Press the MENU button. Select SETTINGS, PICTURE, the 
setting you would like to adjust (Backlight, Contrast, 
Brightness, Color, Tint, or Sharpness). 

2 

Press the (4/^ arrow) buttons to adjust the setting. Press the 
EXIT button. 

NOTE 

❖ Any picture settings that you adjust affect the current input only. 
You can adjust the picture guaiity separately for each input. 


❖ Depending on a Sharpness value, the Edge Enhancer effect may 
be reduced. 

To 

reset to the factory defaults: 

1 

Select the picture mode you want to reset. 

2 

Press the MENU button. Select SETTINGS, PICTURE, 
Reset, and then press the OK button. 


A confirmation screen appears. 

3 

Press the (^/^ arrow) buttons to select Yes, and then press the 
OK button. 










Picture and Sound Controls 

Using the advanced picture settings features 


117 


Using the advanced picture settings features 


note Some of the Advanced Picture Settings features will not be available 
for adjustment when the Picture Mode is set to AutoView. 


Edge Enhancer 

The Edge Enhancer feature lets you adjust the levels for your 
desired picture settings and achieve a sharper picture. 

To set Edge Enhancer: 

1 Press the MENU button. Select SETTINGS, PICTURE, 
Advanced Picture Settings, and then press the OK button. 

2 Press the (A/T arrow) buttons to select Edge Enhancer, and 
then press the OK button. 

3 Press the arrow) buttons to select On. 

4 Press the (A/T arrow) buttons to highlight Level. Press the 
(4/^ arrow) buttons to select either 1, 2, 3, 4, or 5. Press the 
EXIT button. 


NOTE 


❖ When the Picture Mode is set to AutoView, the level range is 
from -2 to +2. 

❖ If the Picture Mode is set to Game or PC, Edge Enhancer is not 
available. 

❖ This feature may not work properly depending on the content. 

❖ Noise may appear on the image depending on the device 
connected to the TV (e.g. a device with a specific enhancer 
function). 


Dynamic Contrast 

Dynamic Contrast detects changes in picture quality that affect the 
appearance of your contrast settings and then automatically adjusts 
the video. 

1 Press the MENU button. Select SETTINGS, PICTURE, 
Advanced Picture Settings, and then press the OK button. 

2 Press the (A/T arrow) buttons to select Dynamic Contrast. 

3 Press the (^/^ arrow) buttons to adjust the level. The 
adjustment range is from 0 to 10. Press the EXIT button. 




118 


Picture and Sound Controls 

Using the advanced picture settings features 


N OT E When the Picture Mode is set to AutoView, the level range is from -5 
to +5. 


DynaLight® 

The DynaLight® feature automatically strengthens the black 

coloring of dark areas in the video according to the level of 

darkness. 

1 Press the MENU button. Select SETTINGS, PICTURE, 
Advanced Picture Settings, and then press the OK button. 

2 Press the {A/T arrow) buttons to select DynaLight. 

3 Press the (► arrow) buttons to select 

Off/Low/Middle/High. Press the EXIT button. 

Static Gamma 

The static gamma feature lets you adjust the levels of black in the 

picture. 

To adjust the static gamma settings: 

1 Press the MENU button. Select SETTINGS, PICTURE, 
Advanced Picture Settings, and then press the OK button. 

2 Press the {A/T arrow) buttons to select Static Gamma. 

3 Press the arrow) buttons to adjust the level. The 

adjustment range is within ±15 from center. Press the EXIT 
button. 


ClearScan® 

This feature helps to eliminate video shaking. 

1 Press the MENU button. Select SETTINGS, PICTURE, 
Advanced Picture Settings, and then press the OK button. 

2 Press the {A/'T arrow) buttons to select ClearScan. 

3 Press the (► arrow) buttons to select Cinema, Smooth, 
Standard, or Off. Press the EXIT button. 


ClearScan® is for the L7200U model and Cinema Mode is for the 
L6200U model. 

If the picture mode is set to Game or PC mode, this feature is 
automatically not available. 


NOTE 



Picture and Sound Controls 

Using the advanced picture settings features 


119 


Cinema Mode 

This feature provides smoother motion and a crisper image. 

1 Press the MENU button. Select SETTINGS, PICTURE, 
Advanced Picture Settings, and then press the OK button. 

2 Press the (A/Y arrow) buttons to select Cinema Mode. 

3 Press the (^/ ► arrow) buttons to select On or Off. Press the 
EXIT button. 

note If the Picture Mode is set to Game or PC mode, this feature is 
automatically set and is not available. 


MPEG NR 

The MPEG noise reduction feature allows you to reduce visible 
interference caused by MPEG compression. 

1 Press the MENU button. Select SETTINGS, PICTURE, 
Advanced Picture Settings, and then press the OK button. 

2 Press the (A/Y arrow) buttons to select Noise Reduction, and 
then press the OK button. 

3 Press the (A/Y arrow) buttons to highlight MPEG NR. 

4 Press the (^/ ► arrow) buttons to select either Low, Middle, 
High, or Off. Press the EXIT button. 

NOTE If the Picture Mode is set to Game or PC, this feature is not available. 

DNR 


DNR allows you soften the screen representation of a weak signal 
to reduce the noise effect. 

1 Press the MENU button. Select SETTINGS, PICTURE, 
Advanced Picture Settings, and then press the OK button. 

2 Press the (A/Y arrow) buttons to select Noise Reduction, and 
then press the OK button. 

3 Press the (A/Y arrow) buttons to select DNR. 

4 Press the (^/^ arrow) buttons to select Low, Middle, High, 
Auto, or Off. Press the EXIT button. 




120 


Picture and Sound Controls 

Using the advanced picture settings features 


N ot E The differences may not always be noticeable. For the best results, 
use lower settings, as picture quality may be greatly reduced if the 
setting is too high. 

If the picture mode is set to Game or PC, this feature is not available. 


Auto Brightness Sensor 

When the Auto Brightness function of Auto Brightness Sensor is 
set to On, the TV optimizes the backlighting levels to suit ambient 
light conditions. 

1 Press the MENU button. Select SETTINGS, PICTURE, 
Advanced Picture Settings, and then press the OK button. 

2 Press the (A/T arrow) buttons to select Auto Brightness 
Sensor Settings, and then press the OK button. 

3 Press the (A/T arrow) buttons to select Auto Brightness 
Sensor. 

4 Press the arrow) buttons to select On or Off. Press the 
EXIT button. 


N ot E When the Picture Mode is set to AutoView, this feature is 
automatically set to On. 


Backlight Adjustment Pro 

This feature adjusts the backlight so that it can change to match the 
ambient light conditions. 

1 Press the MENU button. Select SETTINGS, PICTURE, 
Advanced Picture Settings, and then press the OK button. 

2 Press the (A/T arrow) buttons to select Auto Brightness 
Sensor Settings, and then press the OK button. 

3 Press the (A/T arrow) buttons to select Backlight 
Adjustment Pro, and then press the OK button. 

The Backlight Control Level screen appears. 

4 Press the OK button to display the adjustment window. 

5 Press the (^/ ► arrow) buttons to select the point. 



Picture and Sound Controls 

Using the advanced picture settings features 


121 


6 Press the (A/Y arrow) buttons to adjust the level. 
The adjustment range is from 0 to 100. 



(Sample Illustration) Backlight adjustment window 

7 Press the OK button to fix the adjustment. 

❖ To cancel the adjustment when selecting a point, select 
Cancel on the screen. 

❖ To reset the adjustments of all points to the factory 
defaults, select Reset on the screen, and then press the OK 
button. 


NOTE if the Auto Brightness Sensor is set to Off, this feature will not be 
available. 


ColorMaster™ 

The ColorMaster™ feature allows you to adjust standard colors. 

1 Press the MENU button. Select SETTINGS, PICTURE, 
Advanced Picture Settings, and then press the OK button. 

2 Press the (A/Y arrow) buttons to select ColorMaster, press 
the arrow) buttons to select On. Press the EXIT button. 

Base Color Adjustment 

When ColorMaster™ is set to On, the list of base colors appears. 
You can select a base color to adjust. 

1 Press the MENU button. Select SETTINGS, PICTURE, 
Advanced Picture Settings, and then press the OK button. 

2 Press the (A/Y arrow) buttons to select Base Color 
Adjustment, and then press the OK button. 

The Base Color Adjustment screen appears. 









122 


Picture and Sound Controls 

Setting the expert picture settings 


3 Press the (A/T arrow) buttons to select a color. Press the 
(► arrow) button. 

4 Press the (► arrow) buttons to select Hue, Saturation, or 
Brightness. 

5 Press the (A/T arrow) buttons to adjust the setting. 

6 Repeat Steps 3 through 5 to adjust other colors. To reset the 
adjustments to the factory defaults, select Reset on the screen, 
and then press the OK button. 

Color temperature 

1 Press the MENU button. Select SETTINGS, PICTURE, 
Advanced Picture Settings, and then press the OK button. 

2 Press the (A/T arrow) buttons to select Color Temperature. 

3 Press the (^/^ arrow) buttons to adjust the level. The 
adjustment range is 0 (warm) to 10 (cool). Press the EXIT 
button. 


N OT E When the Picture Mode is set to AutoView, the adjustment range 
is -5 to +5. 


Resetting to the factory default 

1 Press the MENU button. Select SETTINGS, PICTURE, 
Advanced Picture Settings, and then press the OK button. 

2 Press the (A/T arrow) buttons to select Reset, and then press 
the OK button. 

A confirmation screen appears. 

3 Select Yes, and then press the OK button. 

Setting the expert picture settings 

Test Pattern 

When the test pattern is on screen, you can navigate the Picture 
submenus without removing the image. When you move to a 
non-Picture menu, or close the menus, regular video will be 
restored. 

1 Press the MENU button. Select SETTINGS, PICTURE, 
Expert Picture Settings, and then press the OK button. 

2 Select Test Pattern. 



Picture and Sound Controls 

Setting the expert picture settings 


123 


3 Press the arrow) buttons to select On. 

4 Adjust picture settings. 

NOTE When the TV is in 3D mode, this feature is not available. 

RGB Filter 

This feature individually enables or disables the red, green, and 
blue components of the picture to allow for more accurate 
adjustment of each color. 

1 Press the MENU button. Select SETTINGS, PICTURE, 
Expert Picture Settings, and then press the OK button. 

2 Press the (A/Y arrow) buttons to select RGB Filter, and then 
press the OK button. 

3 Press the (A/Y arrow) buttons to select Red, Green, or Blue 
to adjust. 

4 Press the (^/ ► arrow) buttons to select On. 

5 Press the ( Y arrow) button to select Color or Tint, press the 
(4/^ arrow) buttons to adjust. Press the EXIT button. 

note It is not possible to turn off all three colors simultaneously. 

White Balance 

Window Display 

This feature displays the Window Pattern to adjust the white 
balance with a measuring device. 

1 Press the MENU button. Select SETTINGS, PICTURE, 
Expert Picture Settings, and then press the OK button. 

2 Press the (A/Y arrow) buttons to select White Balance, and 
then press the OK button. 

3 Press the (A/Y arrow) buttons to select Window Display. 

4 Press the arrow) buttons to select On. 

5 Adjust the picture settings. 




124 


Picture and Sound Controls 

Locking the picture settings 


Setting Type 

You can adjust the white balance setting. 

1 Press the MENU button. Select SETTINGS, PICTURE, 
Expert Picture Settings, and then press the OK button. 

2 Press the {ALT arrow) buttons to select White Balance, and 
then press the OK button. 

3 Press the (A/T arrow) buttons to select 2P White Balance, 
and then press the OK button. 

4 Press the (A/T arrow) buttons to select Red-Offset, Green- 
Offset, Blue-Offset, Red-Gain, Green-Gain, or Blue- Gain. 

5 Press the arrow) buttons to adjust. 

Copy to All Inputs 

This feature copies White Balance on the current input to all other 
inputs. Individual settings that are not allowed for a specific input 
will not be copied. 

1 Press the MENU button. Select SETTINGS, PICTURE, 
Expert Picture Settings, and then press the OK button. 

2 Press the ( A/T arrow) buttons to select White Balance, and 
then press the OK button. 

3 Press the ( A/T arrow) buttons to select Copy to All Inputs, 
and then press the OK button. 

A confirmation screen appears. 

4 Select Yes, and then press the OK button. 

Locking the picture settings 

The TheaterLock™ feature lets you lock items in the PICTURE 
menu that affect the picture’s display. These items cannot be 
modified when TheaterLock is set to On. 

1 Press the MENU button. Select SETTINGS, PICTURE, 
TheaterLock. 

2 Press the (► arrow) buttons to select On. Press the EXIT 
button. 


Picture and Sound Controls 

Adjusting the audio 


125 


Adjusting the audio 

Muting the sound 

Press the MUTE button to partially reduce (1/2 Mute) or turn off 
(Mute) the sound. Each time you press the MUTE button, the mute 
mode changes in the following order: 1/2 Mute, Mute, Volume, 1/2 
Mute, etc. 

If the closed caption mode is set to Off when you select MUTE 
mode, the closed caption feature becomes active if the TV program 
is closed captioned. To mute the audio without activating the closed 
captioning, press the VOL (-) button to set the volume to 0. 


note If you modify items in the SOUND menu while Mute is active, Mute 
is cancelled. 


Selecting stereo/SAP broadcasts 

The MTS (multi-channel TV sound) feature is only available for 
analog signals on the ANT/CABLE input. When the TV receives a 
stereo or SAP (second audio program) broadcast, the icon STEREO 
or SAP appears on screen when the INFO button is pressed. 

To listen in stereo sound: 

1 Press the MENU button. Select SETTINGS, SOUND, and 
then MTS. 

2 Press the (^/^ arrow) buttons to select Stereo, and then press 
the EXIT button. 


note ❖ You can typically leave the TV in Stereo mode because it outputs 
the type of sound being broadcast (stereo or monaural). 

❖ If the sound is noisy, select Mono. 

❖ If there is no sound in SAP mode, select Stereo. 


Adjusting the audio balance 

You can adjust the audio balance. 

1 Press the MENU button. Select SETTINGS, SOUND, and 
then Balance. 

2 Press the (^/^ arrow) buttons to adjust the balance, and then 
press the EXIT button. 





Picture and Sound Controls 

Adjusting the audio 


Adjusting the range 

You can adjust bass and treble. 

1 Press the MENU button. Select SETTINGS, SOUND, and 
then Bass or Treble. 

2 Press the (► arrow) buttons to adjust the range, and then 
press the EXIT button. 

Selecting the optical audio output format 

You can select the optical audio output format when you connect a 

Dolby 8 Digital decoder or other digital audio systems to the TV’s 

DIGITAL AUDIO OUT terminal. 

1 Tune to a digital source on the ANT/CABLE input. 

2 Press the MENU button. Select SETTINGS, 
PREFERENCES, AV Connection, and then press the OK 
button. 

3 Press the {A/V arrow) buttons to select Digital Audio 
Output. 

4 Press the (► arrow) buttons to select Auto or PCM. Press 
the EXIT button. 


Using the Dolby® Digital Dynamic Range Control feature 

You can further compress Dolby® Digital and Dolby® Digital Plus 
dynamic range so you can switch from digital to analog broadcasts 
at the same dynamic range. 

1 Press the MENU button. Select SETTINGS, SOUND, and 
then Dynamic Range Control. 

2 Press the (► arrow) buttons to select On. 

N OT E This feature is available when Dolby® Digital or Dolby® Digital Plus 
is input to the TV in the following situations: 

❖ When tuned to a digital RF channel 

❖ When an HDMI® input is used 

This feature is automatically set to Off when Dynamic Volume 
(Audyssey Dynamic Volume®) is set to Low or High. 

This feature will also affect Digital Audio Output when the optical 
audio output format is set to PCM. 



Picture and Sound Controls 

Adjusting the audio 


127 


Audyssey Premium Television™ 

These televisions use a suite of technologies for better sound 
including: 

❖ Audyssey EQ®—provides clear, accurate and natural sound 
right out of the box. This technology ensures you enjoy your 
audio experience as much as your video. 

❖ Audyssey ABX"'—technology uses sophisticated driver 
analysis and low frequency monitoring to extend the range and 
bass of small speakers. This enables the system to produce 
lower frequencies than would be possible with a traditional 
system of the same size. 

❖ Audyssey Dynamic Volume®—automatically adjusts volume 
to provide a consistent sound level between television 
programs, commercials, and between the loud and soft 
passages of movies. 

❖ Audyssey Volume Extension®—doubles the volume capability 
in small speakers while blocking distortion so your TV gets 
loud and still sound great. 

❖ Day/Night Modes—automatically keep the volume of the TV 
at the perfect level for day or night. 

❖ Wall/Table Modes—automatically keep the volume at the 
perfect level for television mounted on a wall or located on a 
table-top. 

Using Audyssey EQ® for Wall Mounted or Table-top TVs 

This feature automatically keep the volume at the perfect level for 
television mounted on a wall or located on a table-top. 

1 Press the MENU button. Select SETTINGS, SOUND, 
Audyssey Premium Television, TV Mounting. 

2 Press the arrow) buttons to select Wall or Table. 

Using Audyssey Dynamic Volume ® 

This feature provides a consistent sound volume between television 
programs, commercials, and between the loud and soft passages of 
movies. 

1 Press the MENU button. Select SETTINGS, SOUND, 
Audyssey Premium Television, Dynamic Volume. 

Press the arrow) buttons to select Night, Day, or Off. 


2 


128 


Picture and Sound Controls 

Using the surround sound feature 


note ❖ If Dynamic Range Control is set to On, this feature is 
automatically set to Off. 

❖ This feature does not affect the audio signal output from the 
DIGITAL AUDIO OUT terminal. 


Audyssey ABX™ 

Audyssey ABX™ technology uses sophisticated driver analysis 
and low frequency monitoring to extend the range and bass of small 
speakers. 

To turn on Audyssey ABX™: 

1 Press the MENU button. Select SETTINGS, SOUND, 
Audyssey Premium Television, Audyssey ABX. 

2 Press the arrow) buttons to select Off/Low/High. 

Audyssey EQ® and Audyssey Volume Extension® are default 
settings that are set to On. 

Using the surround sound feature 

Surround settings help to create a thrilling surround sound 
experience with deep, rich bass from stereo sound sources. Your 
TV’s audio will sound fuller, richer, and wider. 

❖ Press the MENU button. Select SETTINGS, SOUND, 
Surround, and then select On or Off. 



Chapter 8 


Advanced features 


Using your home network 

❖ This TV can share videos, music, and photos across your home 
network and other connected products through the MediaShare 
feature. In order to do this, you will have to configure the 
network settings on your TV, see “ePORTAL MediaShare 
(Videos, Music, and Photos)” on page 157. 

❖ If you want to use your home network with an Internet 
connection, you will have to configure the network settings on 
your TV. If necessary, change the network settings, see 
“Setting up the Network” on page 131. 

If you use Internet services, see the following note before use. 

Third party Internet services are not provided by Toshiba, may 
change or be discontinued at any time, and may be subject to third 
party restrictions. Toshiba makes no warranties, representations, or 
assurances about the content, availability, or functionality of third 
party content or services. Third party internet services may require 
the creation of a separate account through a computer with internet 
access, and payment of one-time and/or recurring charges. 

Certain features currently not available in Canada/Mexico. 


129 



Advanced features 

Using your home network 


When using a Wireless network connection: 

Wireless LAN and your Health: 

Wireless LAN products, like other radio devices, emit radio 
frequency electromagnetic energy. However, the level of energy 
emitted by Wireless LAN devices is much less than the 
electromagnetic energy emitted by wireless devices like mobile 
phones. 

Because Wireless LAN products operate within the guidelines 
found in radio frequency safety standards and recommendations, 
Toshiba believes Wireless LAN is safe for use by consumers. These 
standards and recommendations reflect the consensus of the 
scientific community and result from deliberations of panels and 
committees of scientists who continually review and interpret the 
extensive research literature. 

In some situations or environments, the use of Wireless LAN may 
be restricted by the proprietor of the building or responsible 
representatives of the organization. Such restrictions may apply in 
environments where the risk of interference to other devices or 
services is perceived or identified as harmful. 

If you are uncertain of the policy that applies to the use of wireless 
devices in a specific organization or environment, you are 
encouraged to ask for authorization to use the Wireless LAN device 
prior to turning on the equipment. 

Using the TV in a wireless LAN environment: 

❖ It is recommended to use IEEE 802.1 la or IEEE 802.1 In on 5 
GHz for audio and SD video streaming. 

❖ It is recommended to use IEEE 802.1 In on 5 GHz for HD 
video streaming. 

❖ It is recommended that the encoding rate of video content be 
20 Mbps or less. 

❖ It is not recommended to use 2.4 GHz for audio and video 
streaming. 

❖ Content playback may be interrupted by surrounding 
interference. 


Advanced features 

Setting up the Network 


131 


Setting up the Network 

You can select the Network Type. 

1 Press the MENU button. Select NETWORK > Network 
Setup, and then press the OK button. 

2 Press the (A/V arrow) buttons to highlight Network Type. 

3 Press the arrow) buttons to select Wired or Wireless. 

4 If you select Wired, see “Advanced Network Setup” on 
page 136. If you select Wireless, see the next section. 

Wireless Setup 

note Continued AP (Access Point) connection is not guaranteed. 
Connection may be lost while watching TV. 

There are three methods for wireless setup: 

❖ Easy Setup (WPS) 

If AP supports WPS, this can be used. 

❖ WPS is a standard designed to simplify the connection of 
wireless LAN equipment and the setup of network security 
features. 

❖ Assisted Setup (setup using the AP's notification information) 

Network Name, Authentication, and Encryption are decided 
based on information from the AP. You need to manually set 
the Security Key. 

❖ Manual Setup 

Requires manually entering all settings. 

note In order to secure your home network, it is strongly recommended 
that you use a wireless access point with encryption. 


Easy Setup using PBC (Push button configuration) 

1 Press the MENU button. Select NETWORK > Network 
Setup, and then press the OK button. 

2 Press the (A/▼ arrow) buttons to select Wireless Setup, and 
then press the OK button. 

3 Press the ( A/T arrow) buttons to select Easy Setup, and then 
press the OK button. 




132 


Advanced features 

Setting up the Network 


4 

Press the arrow) buttons to select PBC. 

5 

Press the (▼ arrow) button to select Start Scan, and then press 
the OK button. 

6 

Following the onscreen instructions, push the appropriate 
button on your AP. 

7 

When a screen reporting that “the setup has succeeded” 
appears, press the OK button. 

To 

cancel searching for the AP: 

❖ 

Press the BACK button while searching for the AP. A message 
appears. Press the arrow) buttons to select Yes, and then 

press the OK button. 

Easy Setup using PIN (Personal Identification Number) 

l 

Press the MENU button. Select NETWORK > Network 
Setup, and then press the OK button. 

2 

Press the ( A/Y arrow) buttons to select Wireless Setup, and 
then press the OK button. 

3 

Press the (A/Y arrow) buttons to select Easy Setup, and then 
press the OK button. 

4 

Press the arrow) buttons to select PIN. 

5 

Press the ( Y arrow) button to select Start Scan, and then press 
the OK button. 


The Scan screen appears. 

6 

Enter the PIN displayed on this screen into your computer or 
AP. 

7 

Press the (A/Y arrow) buttons to select the desired AP, and 
then press the OK button. 

NOTE 

Check the MAC address on the label or in the manual of the AP and 
select an AP. 

8 

When a screen reporting that “the setup succeeded” appears, 
press the OK button. 

To 

cancel searching for the AP: 

❖ 

Press the BACK button while searching for the AP. A message 
appears. Press the arrow) buttons to select Yes, and then 

press the OK button. 



Advanced features 

Setting up the Network 


133 


Assisted Setup 

1 Press the MENU button. Select NETWORK > Network 


2 

Setup, and then press the OK button. 

Press the (A/T arrow) buttons to select Wireless Setup, and 
then press the OK button. 

3 

Press the (A/T arrow) buttons to select Assisted Setup, and 
then press the OK button. 

4 

Press the (A/T arrow) buttons to select the desired AP, and 
then press the OK button. 

NOTE 

Check the MAC address on the label or in the manual of the AP and 
select an AP. 

5 

Select Security Key, and then press the OK button. 

The Software Keyboard appears. 

6 

Input the Security Key using the Software Keyboard. For more 
information, see “Using the software keyboard” on page 139. 

7 

To save your settings, press the BLUE button. 

NOTE 

The Security Key must adhere to the following conditions: 

❖ TKIP/AES: 8-63 ASCII or 64 Hex characters 

❖ WEP: 5 or 13 ASCII or 10 or 26 Hex characters 

8 

Select Done, and then press the OK button. 

NOTE 

Settings are not saved if the BACK button is pressed before Done is 
selected. 


Manual Setup 

1 Press the MENU button. Select NETWORK > Network 


2 

Setup, and then press the OK button. 

Press the (A/T arrow) buttons to select Wireless Setup, and 
then press the OK button. 

3 

Press the (A/T arrow) buttons to select Manual Setup, and 
then press the OK button. 





134 

Advanced features 

Setting up the Network 

4 

Press the {A/'T arrow) buttons to select Network Name, and 
then press the OK button. 

The Software Keyboard window appears. 

5 

Input the Network Name using the Software Keyboard. For 
more information, see “Using the software keyboard” on 
page 139. 

6 

To save your settings, press the BLUE button. 

7 

Press the (A/T arrow) buttons to highlight Authentication. 
Press the (► arrow) buttons to select Open/Shared, 
WPA-PSK, or WPA2- PSK. 

8 

Press the (A/T arrow) buttons to highlight Encryption. Press 
the arrow) buttons to select None, WEP, TKIP, or AES. 

NOTE 

Certain encryption types are only compatible with specific 
authentication types. 

❖ When Authentication is Open/Shared, only WEP or None are 
compatible. 

❖ When Authentication is WPA-PSK or WPA2-PSK, only TKIP or 
AES are compatible. 

When incompatible Authentication/Encryption pairings are 
attempted, a warning message will be displayed, and no connection 
attempt will be made until the incompatibility is resolved. 

9 

Press the (A/T arrow) buttons to select Security Key, and 
then press the OK button. 


The Software Keyboard window appears. 

10 Input the Security Key using the Software Keyboard. For more 


11 

information, see “Using the software keyboard” on page 139. 

To save your settings, press the BLUE button. 

NOTE 

This item is grayed out when Encryption is set to None. 


12 Select Done, and then press the OK button. 

When Encryption is set to None, a message appears. 

13 Press the (^/ ► arrow) buttons to select Yes, and then press the 
OK button. 




Advanced features 

Setting up the Network 


135 


note Settings are not saved if the BACK button is pressed before Done is 
selected. 

Wireless Information 

The settings configured in Wireless Setup can be confirmed. 

1 Press the QUICK button. Select Wireless Information, and 
then press the OK button. 

2 Press the RED button to check the availability of surrounding 
APs. 

A Wireless Information screen appears when a connection is 
successfully made. 


Item: 

Description: 

Status 

The message, “Connected” appears when the TV is connected to the 

AP 

The message, “Disconnected" appears when the TV is disconnected 
from the AP 

Signal 

Connection signal strength with the AP (STRONG/MEDIUM/WEAK) 

Speed 

The link speed with the AP 

Mode 

Working mode (11a, 11b, 11g, 11n) 

Channel 

The channel in use (1-165) 

Network name 

SSI D set 

Authentication 

Authentication set 

Encryption 

Encryption set 

Security key 

Security Key set 

AP MAC address 

The AP’s MAC address appears when the TV is connected to the AP 

TV MAC address 

The TV’s MAC address 

DHCP 

The message, “Enabled” appears when you use DHCP. 

The message, “Disabled” appears when you do not use DHCP. 

IP address 

The TV’s IP address 

Subnet Mask 

Value of the Subnet Mask 

Default Gateway 

Default GATEWAY’S address 




















136 


Advanced features 

Setting up the Network 




Item: 

Description: 

DNS 

DNS’s address 


N OT E Even if an AP for IEEE 802.11 n is used when Encryption is set to 

WEP or TKIP, the Speed value might be low. We recommend that the 
Encryption setting are changed to AES (Under manual setup). 


Advanced Network Setup 


note ❖ When the DHCP function of the router connected to this TV is 
On, you can set Auto Setup to On or Off. (Usually set it to On.) 

❖ When the DHCP function of the router is Off, set Auto Setup to 
Off, and manually set the IP Address or DNS Address. 


IP Address Setup 


N ot E The settings in Auto Setup are linked to those selected in the DNS 
Setup menu. If Auto Setup is set to On, then Auto Setup in the DNS 
Setup menu will also be set to On. 


Auto Setup: 

1 Press the MENU button. Select NETWORK > Network 
Setup, and then press the OK button. 

2 Press the (A/V arrow) buttons to select Advanced Network 
Setup, and then press the OK button. 

3 Press the [A./'W arrow) buttons to select IP Address Setup, 
and then press the OK button. 

4 Select Auto Setup. Press the (^/^ arrow) buttons to select 

On. 


N ot E Other items are grayed out when Auto Setup is set to On. 


Manual Setup: 

1 Press the MENU button. Select NETWORK > Network 
Setup, and then press the OK button. 










Advanced features “1 0~7 

Setting up the Network 

2 

Press the (A /▼ arrow) buttons to select Advanced Network 
Setup, and then press the OK button. 

3 

Press the (A/T arrow) buttons to select IP Address Setup, 
and then press the OK button. 

4 

Select Auto Setup. Press the (4/^ arrow) buttons to select 

Off. 

5 

Press the (A/T arrow) buttons to highlight IP Address. Then 
press the OK button. 

6 

Press the arrow buttons to select the IP Address field 

and use the 0-9 buttons to enter in a digit. Use the (► arrow) 
button to select the subsequent fields. To save the setting, press 
the OK button. 

NOTE 

IP address field numbers must be between 0 and 255. If you input an 
incompatible number and press the OK button. The field number will 
be reset to the previous value. 

7 

Press the (A/T arrow) buttons to highlight Subnet Mask, and 
edit in the same way as IP Address. 

8 

Press the (A/T arrow) buttons to highlight Default Gateway, 
and edit in the same way as IP Address. 

NOTE 

If you manually set the IP address, you must not use the same IP 
address for any other device. The IP address you use should be a 
private address. If you do not know the correct values to use, contact 
your network administrator or internet service provider. 

DNS Setup 

NOTE 

❖ When the DHCP function of the router connected to this TV is 

Off, set Auto Setup to Off, and manually set the DNS address(es). 
Your Internet Service Provider should have provided these to 
you. 

❖ The settings in Auto Setup are linked to those selected in the IP 
Address Setup menu. If Auto Setup is set to On, then Auto Setup 
in the IP Address Setup menu will also be set to On. 


Auto setup: 

1 Press the MENU button. Select NETWORK > Network 
Setup, and then press the OK button. 





Advanced features 

Setting up the Network 


2 

3 

4 

Press the (A/T arrow) buttons to select Advanced Network 
Setup, and then press the OK button. 

Press the (A/T arrow) buttons to select DNS Setup, and then 
press the OK button. 

Select Auto Setup. Press the arrow) buttons to select 

On. 

NOTE 

Other items are grayed out when Auto Setup is set to On. 

Manual setup: 

1 

Press the MENU button. Select NETWORK > Network 
Setup, and then press the OK button. 

2 

Press the (A/T arrow) buttons to select Advanced Network 
Setup, and then press the OK button. 

3 

Press the (A/'T arrow) buttons to select DNS Setup, and then 
press the OK button. 

4 

Select Auto Setup. Press the arrow) buttons to select 

Off. 

5 

Press the (A/T arrow) buttons to highlight Primary DNS 
Address. 

6 

Press the (4/ ► arrow) buttons to highlight the field you want 
to change, and then use the number buttons to input the 

Primary DNS Address. To save the setting, press the OK 
button. 

NOTE 

DNS address field numbers must be between 0 and 255. If you input 
an incompatible number and press the OK button, the field number 
will be reset to the previous value. 

7 

Press the (A/T arrow) buttons to highlight Secondary DNS 
Address, and edit in the same way as Primary DNS Address. 


MAC Address 

You can view the fixed MAC address for the TV. 

1 Press the MENU button. Select NETWORK > Network 
Setup, and then press the OK button. 

Press the (A/T arrow) buttons to select Advanced Network 
Setup, and then press the OK button. 


2 




Advanced features 

Using the software keyboard 


139 


3 Press the (A/Y arrow) buttons to select MAC Address, and 
then press the OK button. 

Network Connection Test 

This function checks Internet connectivity. 

1 Press the MENU button. Select NETWORK > Network 
Setup, and then press the OK button. 

2 Press the (A/Y arrow) buttons to select Network Connection 
Test, and then press the OK button. 

A message appears to indicate whether the connection was 
successful or not. 


note Favorable Network Connection Test results do not guarantee an 
Internet Connection. Depending on the situation, some Internet 
features may not be available. 

To cancel Network Connection Test, press the EXIT button while 
searching for the Internet connection. 

Using the software keyboard 

You can enter text using the Software Keyboard. Two modes are 
available: full keyboard and keypad. Keypad is the default mode. 

The Software Keyboard window will appear when you press the 
OK button on a field that accepts character input. 


note When using the SmartTV features, software keyboard availability 
depends on the Internet service being accessed. 


Enter text using the keypad 

1 Highlight the desired character on the onscreen software 
keyboard. 

2 Repeat Step 1 and 2 until you have entered all desired text. 

3 Press the BLUE button to save your settings and return to the 
previous screen. 

Enter text using the full keyboard 

1 Highlight the desired character on the onscreen software 
keyboard. 

Press the OK button. 


2 




140 

Advanced features 

Performing a Software Upgrade 

3 

Repeat Step 1 and 2 until you have entered all desired text. 

4 

Press the BLUE button to save your settings and return to the 
previous screen. 

NOTE 

If the BACK button is pressed, changes are not saved and the 
software keyboard window is closed. 

Input operation on the remote control: 

Item: 

Description: 


Inputs the selected character 

0-9 

Inputs numbers directly in keyboard mode. In keypad, these keys are 
used to select a character for entry. 


Moves the character highlight 

| ►► 

Moves the cursor 


Moves the cursor to the head of a character string 

►w 

Moves the cursor to the end of a character string 

RED 

Deletes one character to the left of the cursor 

GREEN 

Selects full keyboard or keypad mode 

YELLOW 

Chooses an accented version of the current letter, if applicable 

BLUE 

Saves changes and closes the Software Keyboard window 

BACK 

Closes the Software Keyboard window without saving changes 


Performing a Software Upgrade 

TOSHIBA may offer upgrades for the TV's software in the future. 
The TV's software is upgraded via the Network. 


N ot E An Internet connection is required. 

Before downloading software: 

1 Configure your TV to connect to the Internet. 





















Advanced features 

Viewing the Software Licenses 


141 


NOTE 

❖ You will not be able to use the TV set while performing the 
upgrade. 


❖ Do not turn off the TV during the upgrade. 

❖ By upgrading, the factory default values may be changed. 

2 

Press the MENU button. Select GET HELP, Software 
Upgrade, and then press the OK button. 


The Network Upgrade screen appears. 

3 

Press the OK button. 

NOTE 

If the network is not available, a warning message appears. 


4 After a successful download, the TV software upgrade will 
start automatically. 


Viewing the Software Licenses 

The Licenses for the software used in this TV are available for 
viewing. 

❖ Press the MENLT button. Select GET HELP, Software 
Licenses, and then press the OK button. 

A screen appears displaying all the licensing information 
required for the television’s software. 





“j AO Advanced features 

Using the SmartTV features 

Using the SmartTV features 


NOTE 


❖ You need to connect to the Internet before using this feature, see 
“Setting up the Network” on page 131. 

❖ Certain services may not be currently available in your area. 

❖ User registration or login may be required to use some services. 

❖ Third party internet services are not provided by Toshiba, may 
change or be discontinued at any time and may be subject to 
Internet service provider restrictions. Toshiba makes no 
warranties, representations, or assurances about the content, 
availability or functionality of third-party content or services. Use 
of third party Internet services may require the creation of a 
separate account through a computer with Internet access and/or 
payment of one-time and/or recurring charges and membership. 
Not all third party services may be available on or compatible 
with this product. In order to experience the full suggested 
capabilities of this product, fuliy-compatible devices may be 
required. 


❖ If the display of the date and time is wrong, turn off the TV, and 
turn it on again. 

❖ The menu items for features like the Apps may change in the 
upgrade process. 


eMANUAL 

The eMANUAL provides on-screen, context-sensitive, instructions 
that describe the TV features. 

ePORTAL page 

The ePORTAL is the “home page” that allows you to control the 
various elements of your Smart TV system. This includes 
traditional features such as Apps, Internet (web browser), and 
MediaShare (Media Player), as well as other unique Toshiba 
features such as SearchAll, MediaGuide, Events, and Messages. 

ePORTAL SearchAII 

The SearchAll function scours the Internet and your connected 
devices for content. This search finds content from: 

❖ TV programming and Video On Demand (VOD) 





Advanced features 

Using the SmartTV features 


143 


❖ MediaShare (Media Player): Connected Media Servers and USB 
devices 

❖ The Internet 

Performing a Search 

You can perform a search using the SEARCH button on the remote 
control or the SearchAll bar on the ePORTAL page. 

1 From the remote control, press the SEARCH button while 
watching television programs. 

Or 

2 From the ePORTAL, select the SearchAll bar at the top of the 
screen and press OK. 

3 Type a keyword into the Search Bar using the onscreen 
keyboard or the wireless QWERTY keyboard. A maximum of 
50 characters can be entered for a search. 

4 After entry is complete, select the SEARCH button on the 
screen and press OK. 

5 The search results page will display a list of content containing 
the keyword. The Search may take up to 60 seconds to 
complete. 

6 Highlight a search result and press the OK button to view the 
content. 

7 To view more search results, select MORE ..> and press OK. 
The MORE ..> button will jump to each category's search 
results. 

❖ When you select MORE ..> in the MediaShare 

(MediaPlayer), you will need to enter the keyword again 
in the search. 


note ❖ Depending on the status of the target device (media server), the 
Media Player Search and Search All features may not function 
correctly, such as if the server is busy or does not support a 
search function. 

❖ Additional options are dependent on the current source and/or 
content. 

❖ The search keywords that you enter are stored in memory. The 
maximum number that can be stored at one time is 30. After 30 
words is reached, the oldest words will be deleted as new words 
are added. 



144 

Advanced features 

Using the SmcirtTVfeatures 

ePORTAL Apps 

The ePORTAL Apps can be used to display bonus content through 

content service providers such as: 

❖ 

Netflix® 

❖ 

VUDU Apps™ 

❖ 

VUDU Movies™ 

❖ 

YouTube® 

❖ 

CinemaNow® 

❖ 

MediaGuide 

❖ 

eMANUAL 

NOTE 

Certain services may not be available in your area. 


Select an App from the ePORTAL 

To select an App from the ePORTAL: 

1 Open the ePORTAL page. 

2 Click on the Apps icon. 

3 A new page opens displaying the available Apps. 

4 Select the desired App and press OK. 

Netflix® 


Watching movies with Netflix® 

1 Press the NETFLIX button or press the APPS button on the 
remote control and select the Netflix icon. 

2 Follow the onscreen instructions. 

After having activated Netflix® player and prepared an Instant 
Queue, movies and TV episodes in your Instant Queue will appear 
on the TV screen. Select the desired content using the remote 
control. 



Advanced features 

Using the SmartTV features 


145 


note ❖ The resolution of video content streamed from Netflix® varies 
depending on the communication speed and bit-rate. 

❖ Future upgrades can change the screens and messages 
displayed in the Netflix® feature. 

❖ Netflix® is supported in the U.S. and Canada, and may not be 
available in other countries or regions. 

To close Netflix®, press the EXIT button. 

To confirm the Netflix ESN (Electronic Serial Number): 

1 Press the MENU button. Select NETWORK > Smart Apps 
Setup > Netflix Setup, and then press the OK button. 

2 Press the ( A/V arrow) buttons to select ESN. and then press 
the OK button. 

The Netflix ESN screen appears. 

To deactivate your device: 

1 Press the MENU button. Select NETWORK > Smart Apps 
Setup > Netflix Setup, and then press the OK button. 

2 Press the ( A/T arrow) buttons to select Deactivation, and then 
press the OK button. 

3 Press the ( ► arrow) buttons to select Yes, and then press the 
OK button. 

VU DU™ 


VUDU™ is an on-demand service that offers high definition 
movies on the Web. 

1 Press the APPS button on the remote control, or select the 
Apps icon on the ePORTAL. 

2 Press the arrow) buttons to select VUDU, and then press 
the OK button. 

NOTE Use of VUDU™ requires a working broadband Internet connection 
(1 to 2 Mbps for SD video, 2.25 to 4.5 Mbps for HD video, and 4.5 to 
9 Mbps for HDX video). 


To close VUDU, press the EXIT button. 
To deactivate your device: 





146 

Advanced features 

Using the SmartTV features 

1 

Press the MENU button. Select NETWORK > Smart Apps 
Setup > VUDU Deactivation, and then press the OK button. 

2 

Press the arrow) buttons to select Yes, and then press the 

OK button. 

NOTE 

If the VUDU™ icons are not shown in the ePORTAL, you may need to 
update the TV firmware. You can access VUDU™ through the web 
browser. 


YouTube™ 

YouTube is a video-sharing service managed by YouTube™, LLC. 
This TV allows you to view YouTube™ video content. 


1 

Press the APPS button on the remote control or select the Apps 
icon on the ePORTAL. 

2 

Press the arrow) buttons to select YouTube, and then 

press the OK button. 

3 

Press the (A/T/ arrow) buttons to select the file you wish 


to view, and then press the OK button. 
To close YouTube™, press the EXIT button. 


NOTE 

If the YouTube™ icon is not shown in the ePORTAL, you may need to 
update the TV firmware. You can also access YouTube™ through the 
web browser. 


NOTE 




Advanced features 

Using the SmartTV features 


147 


NOTE 


❖ YouTube™ content has been independently managed by 
YouTube™, LLC. 

❖ Not all YouTube™ content that can be accessed by computer 
may be viewed with this TV. 

❖ This TV may not be able to do some operations that computer 
can do. 

❖ Depending on network environment and the use situation, 
content may be difficult to view. 

❖ Though the same volume value, the actual volume might be 
greatly different depending on content. 

❖ This TV might take time during start-up and the playback of 
content. 

❖ Content that the user may feel is improper or offensive may be 
included in the content of YouTube™. 

❖ We do not assume any responsibility for content that YouTube™ 
offers. 


❖ If you have any questions about YouTube™ content, contact 
YouTube™, LLC. 

❖ The content of service and the screen that can be used may be 
changed without notice. 

❖ You will need to use a computer to post videos to YouTube™. 

❖ Not all content can be viewed normally when you access Web 
sites other than YouTube™ Leanback through this TV. 


CinemaNow® 

CinemaNow® is an on-demand service that offers high definition 
movies on the Web. 

1 Press the APPS button on the remote control or select the Apps 
icon on the ePORTAL. 

2 Press the (4/ ► arrow) buttons to select CinemaNow, and then 
press the OK button. 

To close CinemaNow®, press the EXIT button. 

ePORTAL Internet 
Web Browser 

The web browser on this TV lets you explore everything the web 
has to offer. Along with access to popular places, you’ll be able to 




148 


Advanced features 

Using the SmartTVfeatures 


search for and browse your favorite sites, and find all the content 

you want, with simple, intuitive navigation. 

The web browser on this device: 

❖ does not support platform-dependent technologies such as 
ActiveX. 

❖ only supports preinstalled plug-ins. 

❖ may not support media formats other than the following: JPEG 
/ PNG / GIF. 

❖ uses a single built-in font. Some text may not be displayed as 
intended. 

❖ does not support downloading of files or fonts. 

❖ is a TV browser. It may work differently than PC browsers. 

❖ does not support parental control or locks, and it is the 
responsibility of the user to monitor browser usage by minors. 

In addition, some web pages may exceed the memory allotment of 

the web browser. The web browser will close when this happens. 


N OT E Some pages may not be displayed correctly or may display 
differently on different devices. 


Using the web browser 

1 Connect to the network. 

2 Press the ePORTAL button on the remote control to access the 
ePORTAL page. 

The web browser page is displayed. 

N ote Pressing the INTERNET button on the remote control will also 
launch the web browser. 

3 Use the (A/Y/^/^ arrow) buttons to scroll to the Internet 
icon and press OK. 

4 Use the (A/Y/^/^ arrow) buttons to scroll to the URL 
Address Bar and press OK. 

5 Enter the desired URL address by using the ( A/Y/4/ ► arrow) 
buttons or by using the Wireless QWERTY keyboard. Press 
the BLUE button on the remote control or QWERTY keyboard 
when finished. 




Advanced features 

Using the SmartTV features 


149 


6 

You can now browse websites on your TV using the 
(A/T/^/^ arrow) buttons on the remote control or by using 
the Wireless QWERTY keyboard. 

NOTE 

Select Mouse Emulation by pressing the GREEN button on the 
remote control to navigate with a driverless wireless mouse (wireless 
mouse is not included). 

Browsing favorite websites 

1 

Connect to the network. 

2 

Press the ePORTAL button on the remote control to access the 
ePORTAL page. 

NOTE 

Pressing the INTERNET button on the remote control will also 
launch the web browser. 

3 

Use the (A/T/ arrow) buttons to scroll to the Internet 
icon and press OK. 

4 

Use the (A/Y/^/^ arrow) buttons to scroll to Favorites 
STAR and press OK. 

NOTE 

By adding frequently visited websites to Favorites, you can browse 
them easily. 

You can view the addresses of the websites you visited previously. 

5 

Select the item or folders to move to the desired URL address 
and press OK. 

NOTE 

You can press the GREEN button on the remote for thumbnail view 
of ail your favorites. 

6 

You can now browse websites on your TV using the 
(A /▼/•^/► arrow) buttons on the remote control or via using 
the Wireless QWERTY keyboard. 


Select Mouse Emulation by pressing the GREEN button on the 
remote control to navigate with a driverless wireless mouse (wireless 
mouse is not included). 


NOTE 






150 


Advanced features 

Using the SmartTVfeatures 


Adding Favorites Websites 

1 Connect to the network. 


2 

Press the ePORTAL button on the remote control to access the 


ePORTAL page. 

NOTE 

Pressing the INTERNET button on the remote control will also 
launch the web browser. 

3 

Press the Navigation buttons to scroll to the Internet icon and 
press OK. 

4 

Follow “Using the web browser” on page 148 to display your 
desired website. 

5 

Press the Navigation buttons to scroll to Favorites STAR on 
the Browser Menu Bar and press OK. 

NOTE 

By adding freguently visited websites to Favorites, you can browse 
them easily. 

You can view the addresses of the websites you visited previously. 

6 

Press OK on the remote control to save the desired website to 
your favorites. 

NOTE 

The desired website is highlighted and displayed on the top row with 
the + add icon. 

The + add icon will change to a page icon after the website has been 
saved to favorites. 

7 

Press the BACK button on the remote to return to browsing 
your website. 


Launch the Internet and access a specific web page 

1 Press the INTERNET button on the remote or select the 


2 

Internet icon on the ePORTAL page. 

Use the onscreen keyboard or the wireless QWERTY keyboard 
to type the URL address into the address bar. 

3 

Launching the web page is dependent on which input mode 
you are using: 

❖ If using the remote control, select the OK button on the 
address bar to view the page. 




Advanced features 

Using the SmartTV features 


151 


❖ If using the onscreen keyboard, press the BLUE button to 
view the page. 

❖ If using the USB/QWERTY keyboard, press the ENTER 
button to view the page. 

ePORTAL Messages 

You can create personal messages on your TV using the Messages 

feature. 

Launch the Messages feature 

1 Select the Messages icon on the ePORTAL page. 

2 Press the GREEN button on the remote to open a new message 
window. 

3 Use the onscreen keyboard or the wireless QWERTY keyboard 
to type your message into the message field. 

4 Press the OK button to save your message. 

ePORTAL Events 

You can set events on your TV through the Events Calendar 

feature. 

Create an event 

1 Select the Events icon on the ePORTAL page. 

2 A calendar is displayed. Move to the Previous Month or Next 
Month by using the left and right jump buttons (« ») on the 
remote. 

3 Highlight the desired date using the cursor keys, and press OK. 
A new Event window is displayed. 

4 Use the onscreen keyboard or the wireless QWERTY keyboard 
to type in the event information. 

5 If a recurring event, you can use the Repeat option to set the 
frequency of occurrence by using the Jump buttons (« ») on 
the remote. 

6 Press the GREEN button to save the new event. 

Delete an event 

1 Move to the Previous Month or Next Month by using the left 
and right jump buttons on the remote. Highlight the desired 
date using the cursor keys. 


152 


Advanced features 

Using the SmartTVfeatures 


2 Press the RED button to delete the event(s) for that date. 

Edit an event 

1 Select the Event in the Event list. Press OK. 

2 The Edit Event window is displayed. You can change the date, 
event information, and repeat options. 

ePORTAL Favorite Sites 

You can access your favorite (“bookmarked”) Internet sites from 

the ePORTAL. 

Access your Internet favorites via the ePORTAL 

1 Select the Favorite Sites icon on the ePORTAL page. 

The bookmarked sites are displayed on the page along with the 
website name and URL address. 

2 Select the bookmarked site and press the OK button. 

The web browser will launch and display the selected site. 

Edit ePORTAL Favorites 

You can show, hide, and change the position of your favorite apps 

located on the bottom row of the ePORTAL page. 

1 Select the gear icon at the top right of the ePORTAL page to 
access the Preferences window, and select the Edit Favorites 
menu. 

2 Select the Show/Hide menu option. In the new window, move 
the focus to the desired app and press OK to add a check 
(show) or remove a check (hide). Highlight Save and press OK 
to store your changes. 

3 To change the order of the apps in the Favorites section, select 
the Move option from the Edit Favorites menu. 

4 From the Move window, highlight the app you wish to move 
and press the OK button. The icon will switch to Move mode. 
Use the left/right cursor keys to move to the desired position. 

5 Press OK again to confirm the new position. Highlight Save 
and press OK to save your changes. 


Advanced features 

Using the SmartTV features 


153 


ePORTAL Preferences 

Use ePORTAL Preferences to customize the look and feel of the 
ePORTAL. 

From Preferences, you can: 

❖ Adjust the background by selecting different colors 

❖ Edit favorite Apps by moving and selecting which favorites to 
show or hide 

❖ Adjust your Event Notification flag setting 

To access the Preferences window, select the gear icon in the top 
right corner of the ePORTAL 

MediaGuide 

Using MediaGuide 

The MediaGuide is an integrated service that provides access to 
both television programming and Internet content based on the 
Rovi™ system. 

Before beginning your MediaGuide installation, please make sure 
your initial setup for channel tuning, IR blaster, and network 
settings is completed. For instructions on the initial setup please see 
“Initial Setup and Menu” on page 51. For the initial installation of 
the MediaGuide, please follow the onscreen instructions. 


NOTE The Rovi Corporation and/or its subsidiaries and related affiliates are 
not in any way liable for the accuracy or availability of the program 
schedule information or other data in the Rovi Guide system and 
cannot guarantee service availability in your area. In no event shall 
Rovi Corporation and/or its related affiliates be liable for any 
damages in connection with the accuracy or availability of the 
program schedule information or other data in the Rovi Guide 
system. 


MediaGuide setup 

When you access MediaGuide for the first time from the GUIDE 
button on the remote control, a step-by-step installation wizard will 
appear. Follow the onscreen instructions in order to complete the 
setup and view your local TV listings. 



154 


Advanced features 

Using the SmartTVfeatures 



N ot E If you see an error message saying that the MediaGuide was not able 
to connect to the network, you should check your network 
connections before trying again. 


The step-by-step installation wizard will appear again after 
performing any of the following tasks: 

❖ Changing the ANT/CABLE In setting 

❖ Changing the Country setting 

❖ Changing the Device Type or Input under the IR Blaster Setup 
menu 

❖ Reset MediaGuide 

Operating the MediaGuide 

1 Press GUIDE on the remote control or select the MediaGuide 
from the ePORTAL from the Apps screen. 

2 The MediaGuide screen will be displayed with the defaulted 
setting; the first menu is set to ALL, the secondary menu is set 
to TV Listings, and the current channel is highlighted. 

3 To navigate within the MediaGuide, press the (A/T/ 
arrow) buttons to select content and move within a menu and 
then press the OK button to select an item option. 

❖ Selecting a channel or TV listing will turn to live TV for 
the particular show. 

❖ If the show is not being aired at the time it has been 
selected, you will be directed to the Overview screen 
within the Overview screen to see upcoming shows. Select 
the Watch option to view it. 



(Sample Image) MediaGuide Top-Level menu 




Advanced features 

Using the SmartTV features 


155 


4 In the subsequent menus, use the arrow) buttons to 

navigate between menu levels. 

The sub-menus include My Profile; Movies, Settings, TV, 
Search, and TV Listings. 


OTE 


❖ Third party Internet services are not provided by Toshiba, may 
change or be discontinued at any time and may be subject to 
Internet service provider restrictions. Toshiba makes no 
warranties, representations, or assurances about the content, 
availability or functionality of third-party content or services. Use 
of third party Internet services may require the creation of a 
separate account through a computer with Internet access and/or 
payment of one-time and/or recurring charges and membership. 
Not all third party services may be available on or compatible 
with this product. In order to experience the full suggested 
capabilities of this product, fully-compatible devices may be 
required. 

❖ Service Information may not be displayed or there may be little 
service information displayed depending on the area or the kind 
of broadcast. 

❖ The MediaGuide can only be used when your TV is connected to 
the Internet. 

❖ Starting and operation of this service may take several minutes. 

❖ Software updates may be needed in order to use this service. 

❖ During use of the MediaGuide, usage information will be notified 
to the Rovi server to ensure continued efficient operation of the 
guide. 

❖ Rovi Corporation and/or its subsidiaries and related affiliates are 
not in any way liable for the accuracy or availability of the 
program schedule information or other data in the Rovi Guide 
system and cannot guarantee service availability in your area. In 
no event shall Rovi Corporation and /or its related affiliates be 
liable for any damages in connection with the accuracy or 
availability of the program schedule information or other data in 
the Rovi Guide system. 

❖ In order to experience the full suggested capabilities of this 
product, fuily-compatible devices may be required. This feature 
is not available in Mexico, and certain features may not be 
available in all countries. 



156 


Advanced features 

Using the SmartTVfeatures 


Selecting a listing 

If you can select and open a TV program, movie, or celebrity, an 
Overview screen will appear with general information about the 
selected item. It also contains options such as watch, bookmark, or 
see a trailer. The detail screen has several on-screen buttons such as 
Overview and Summary. To open these options: 

1 Press the (A/T/^/^ arrow) buttons to highlight the option. 

2 Press the OK button to select the option. 

Viewing a detail screen 

The detail screen contains menu options that display additional 
information such as biographies and reviews. The TV 
Listing/Movie Detail menus can contain information such as 
History, Episodes - For TV series only, Overview, Summary, 
Review, Cast & Crew, and others. 

Celebrity detail menus contain different items such as History, 
Overview, Biography, and Credits. 


N OT E The actual menus displayed on the detail screen vary depending on 
the service that you have configured for the MediaGuide and what 
types of information about the selected item are available to be 
displayed. There may be instances where data cannot be acquired 
from the server due to network problems. Obtaining accurate 
MediaGuide data depends on the timing of the updates by the guide 
data provider and your Internet connection. 


Searching in MediaGuide 

You can use the Search menu, within the MediaGuide to find 

movies or program by name. You can search from the primary 

menu, or from within the TV or Movie menus. 

To search using a keyword: 

1 Select the Search option from one of the menus. 

2 Type in a keyword using the search keypad. 

3 Press the OK button to select the button. 

4 When the title you want is in the suggestion list, press the right 
button to move to the list and then the Up or down button to 
highlight it. 

5 Press the OK button on the search option screen for search 
results to select the item. 



Advanced features 

Using the SmartTV features 


157 


6 Press the OK button to open the detail screen for that item. 

To search all of the connected media devices across your network 
as well as the TV programming, use the SearchAll feature in the 
ePORTAL, see “ePORTAL SearchAll” on page 142. 

Reset MediaGuide 

To reset the MediaGuide, please follow these steps: 

1 Press the MENU button on the remote control. 

2 Select Network>Smart Apps Setup>Reset MediaGuide. 

3 Press the OK button. 

A confirmation message will be displayed. 

4 Select Yes to proceed. It may take a few moments to complete 
the reset. 

You can also reset the MediaGuide from the MediaGuide from the 
setting menu 

note If the MediaGuide cannot launch or is not functioning correctly, reset 
the MediaGuide using the instructions above. 


ePORTAL MediaShare (Videos, Music, and Photos) 

Use the Videos, Music, and Photos icons on the ePORTAL to 
quickly access video, music, and image files located on storage 
media or your home network. 

There are two ways to play content. 

The TV can control and play content on a MediaShare (Media 
Player). The Media Server is a device with server functions that 
stores media content for playback on a MediaShare (Media Player). 

note ❖ Do not insert/remove a USB device while in use. 

❖ The MENU button is not available while using the MediaShare 
(Media Player) feature. 


MediaShare (Media Player) specifications 

Devices: 

❖ USB device: USB Mass Storage Class devices (MSC) 




158 

Advanced features 

Using the SmcirtTVfeatures 

❖ 

Connected Media Server: 

Your computer (for example) 

NOTE 

❖ Connectivity is not guaranteed for aii devices. 

❖ Some functionality may be lost with a USB HUB connection. 

Supported file system: 

❖ 

FAT 16 and FAT32 

NOTE 

You must obtain any required permission from copyright owners to 
download or use copyrighted content. Toshiba cannot and does not 
grant such permission. 


Basic operation 

Using MediaShare (Media Player) with a USB device 

When Auto Start is enabled, you will be asked if you want to start 
the MediaShare (Media Player) when a USB device is inserted. If 
Auto Start is disabled (or if you want to connect to a media server 
on the network), you must manually start the MediaShare (Media 
Player) from the ePORTAL. 

To change the Auto Start setting 

1 Press the MENU button. Select NETWORK, Media Player, 
Setup, and then press the OK button. 

2 Press the (AJV arrow) buttons to highlight USB Auto Start. 

3 Press the (► arrow) buttons to select On or Off. 

Auto Start 

1 Insert a USB device into the USB terminal. 

A prompt appears. 

2 Press the (^/ ► arrow) buttons to select Y es, and then press the 
OK button. 

3 Press the (A/T arrow) buttons to select Video, Music, or 
Photos, and then press the OK button. 

4 To change the device, press the (A/T/ ^/^ arrow) buttons to 
select the devices on the screen, and then press the OK button. 

5 Press the (A/T arrow) buttons to select the device. 




Advanced features 

Using the SmartTV features 


159 


ot E If Auto Start is set to Off, you can start the MediaShare (Media 
Player) manually. 


Manual Start 

1 Insert a USB device into the USB terminal. 

2 Press the ePORTAL button. Select the Video, Music, or 
Photos icon, and then press the OK button. 

A screen showing photo thumbnails or a list of files (videos or 
music) appears. 

3 To change the device, press the ( A/T/ arrow) buttons to 
select the Device Name button on the screen, and then press 
the OK button. 

A screen showing photo thumbnails or a list of files (movies 
and music) appears. 

4 Press the (A/T arrow) buttons to select the device. 

To select a file in the list of contents 

1 Press the (A/T/ ^/^ arrow) buttons to select a file or folder. 

2 Press the OK button to move to the next layer, or press the 
BACK button to return to the previous layer. 

To close the MediaShare (Media Player) 

❖ Press the EXIT button. 

The TV will return to the last-viewed channel or video input. 

Using MediaShare (Media Player) with a Media Server 

You need to configure a home network before using this feature, 
see “Setting up the Network” on page 131. 

1 Press the ePORTAL button. 

2 Select the Video, Music, or Photos icon, and then press the 
OK button. 

A screen showing photo thumbnails or a list of files (movies 
and music) appears. 

3 To change the device press the (A/T/ ^/^ arrow) buttons to 
select the device name on the screen, and then press the OK 
button. 

4 Press the (A/T arrow) buttons to select the device. 




160 


Advanced features 

Using the SmartTVfeatures 


5 

To select a file in the list of contents 

1 Press the (A/Y/arrow) buttons to select a file or folder. 

2 Press the OK button to move to the next layer, or press the 
BACK button to return to the previous layer. 

To close the MediaShare (Media Player) 

❖ Press the EXIT button. 

The TV will return to the last-viewed channel or video input. 

To display the device information 

1 Press the QUICK button to open the Quick menu in list mode 
or Multi View mode. 

2 Press the (A/Y arrow) buttons to select Device Information. 

Viewing movie files 
Basic Playback 

1 Select a file, see “To select a file in the list of contents” on 
page 159. 

2 Press the OK button or PLAY button to begin playback. 

N ot E Depending on the file size, it may take some time to start playback. 

3 Press the STOP button to stop playback. 

4 If playback finishes before STOP is pressed, the screen returns 
to the list. 

N ote When the repeat mode is set to All, the next file will start playing 
automatically. 


To pause playback 

❖ Press the PAUSE button during playback. You can move to 
the desired replay position by pressing the (► arrow) 
buttons during PAUSE. 

❖ To resume normal playback, press the PLAY button. 




Advanced features 

Using the SmartTV features 


161 


NOTE The PAUSE button or operations during Pause may not be functional 
depending on content or media server. 


To locate a specific file 

❖ Press the Skip Reverse or Skip Forward button repeatedly to 
access the desired file. 

❖ ( m ): Playback starts from the beginning of the current 
file or previous file. 

❖ ( | ): To locate subsequent files. 

note These features may not be operable depending on the content or 
media server. 


To set the repeat mode 

1 Press the QUICK button. 

The current repeat setting appears. 

2 Press the arrow) buttons to select Off. All. or 1. 

3 Press the BACK button. The setting is effective until the TV is 
turned off. 


Mode: 

Description: 

Off 

The content is played back only once 

All 

All content in the same folder are repeatedly played back 

1 

The same content is repeatedly played back 


To display the file status information 

1 Press the INFO button during playback. The information will 
be displayed at the bottom of the screen. 

2 Press the INFO button again to hide the information. 

The information may not correctly display depending on the content 
or media server. 


NOTE 












162 


Advanced features 

Using the SmartTVfeatures 


File specifications: 

USB use: 

❖ File format: MPEG2 PS, MPEG2 TS 

❖ Video: MPEG2, H.264 

❖ Audio: MPEG 1 -Lay er2/MPEGl -Lay er3/Dolby® Digital 
(AC3)/LPCM, ACC 

❖ Maximum number of files: 1000 per folder 
Content on Connected Media Server: 

❖ File format: MPEG2 PS, MPEG2 TS, MP4*, WMV* 

❖ Video: MPEG2(PS), H.264* 

❖ Audio: LPCM/MPEG 1 -Layer 1/MPEG 1 -Layer2/ 
MPEG2-Layer2/Dolby Digital (AC3)/AAC 

❖ Maximum number of files: 1000 per folder 

❖ Maximum video resolution: 1920 x 1080 

n ote It may not be possible to use certain playback or display some 
files. In some cases certain files and servers may not support 
playback features, such as pause. 

Playing music files 

Basic Playback: 

1 Select a file, see “To select a file in the list of contents” on 
page 159. Press the OK or PLAY button to begin playback. 

N ot E Depending on the file size, it may take some time to start playback. 

2 Press the STOP button to stop playback. 

If playback finishes before the STOP button is pressed, the 
screen returns to the list. 

To pause playback: 

1 Press the PAUSE button during playback. 

2 To resume normal playback, press the PLAY button. 




Advanced features 

Using the SmartTV features 


163 


note The PAUSE button or operations during Pause may not be 

functional depending on content or media server. Certain processes 
may take some time to complete. 

To locate a specific file: 

❖ Press the Skip Reverse or Skip Forward button repeatedly to 
access the desired file. 

❖ ( m ): Playback starts from the beginning of the current 
file or previous file. 

❖ (^mhJ): To locate subsequent files. 


note These features may not be operable depending on the content or 
media server. 

To set the repeat mode: 

1 Press the QUICK button. 

The current repeat setting appears. 

2 Press the arrow) buttons to select Off, All, or 1. 

3 Press the BACK button. The setting is effective until the TV is 
turned off. 


Mode: 

Description: 

Off 

The content is played back only once 

Ail 

Ail content in the same folder are repeatedly played back 

1 

The same content is repeatedly played back 


To display the file status information: 

1 Press the INFO button during playback. 

The information appears at the bottom of the screen. 

2 Press the INFO button again to hide the information. 

The information may not correctly display depending on the content 
or media server. 


NOTE 












164 


Advanced features 

Using the SmartTVfeatures 


File specifications: 

USB use: 

❖ File format: MP3, MP4 (AAC), LPCM 

❖ Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz 

❖ Bit rate: From 32 to 320 kbps 

❖ Maximum number of files: 1000 per folder 

Content on Connected Media Server: 

❖ File format: MP3, LPCM 

❖ Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz 

❖ Bit rate: From 32 to 320 kbps 

❖ Maximum number of files: 1000 per folder 

n ote It may not be possible to use certain playback or display some 
tiles. In some cases certain files and servers may not support 
playback features, such as fast-forward. 

Viewing photo files 

Multi View mode 

This view mode allows you to search for photos in a grid format. 

These pictures are displayed using thumbnail data in each image 

file. 

1 Press the (A/'W/ arrow) buttons to move the highlight by 
one window. 

If all of the photos will not fit in one screen, when pressing the 
(▲ arrow) button at the top left thumbnail, the screen will 
scroll up one by one. Similarly, when pressing the 
(Y arrow) button at the bottom right thumbnail, the screen will 
scroll down one by one. 

2 When you select a folder, press the OK button to move to the 
next layer. Press the BACK button to move back to the 
previous layer. 

3 Press the OK button to view the selected photo in Single View 
mode. 



Advanced features 

Using the SmartTV features 


165 


note ❖ Displaying thumbnail data may take time. 

❖ In order to use the A/T arrow to scroll the screen, there must 
be enough content to take up two screens. 


Single View mode 

In this view mode, only files located in the selected directory are 
displayed. When moving from Multi View mode to Single View 
mode, the currently selected photo appears. 

1 On Multi view mode, press the (A/T/ arrow) buttons to 
select a file, and then press the OK button. 

2 Press the (^/ ► arrow) buttons to view the next or previous 
file. 


NOTE 

Single view mode is changed to Multi View mode when the BACK 
button is pressed. 

Slideshow mode 

This view allows you to watch a slideshow of the photos. In this 
mode, only files located in the selected directory appear. 

1 

To switch to Slideshow mode, press the OK button while in 
Single View mode. To return to Single View mode, press the 
OK button again. 

2 

Press the arrow) buttons to view the next or previous 

file. 

Mode settings 

l 

Press the QUICK button to open the Quick menu while in 
Single View mode or Slideshow mode. 

2 

Press the (A/T arrow) buttons to select the item (Interval 
Time or Repeat). 

3 

Press the arrow) buttons to adjust the setting. 

4 

Press the BACK button to return to Single View mode or 
Slideshow mode. 

Mode: 

Description: 

Interval Time 

Sets a time interval at which to view photos 








166 


Advanced features 

Using the SmartTVfeatures 



Mode: 

Description: 

Repeat 

Displays photos in the same directory repeatedly (On/Off) 


Rotate the image 

While viewing the image in Single View mode or Slideshow mode, 
press the (A/Y arrow) buttons to rotate the image 90 degrees. 

Return to the thumbnail 

Press the BACK button while in Single View mode or Slide Show 
mode. 

Display file status information 

1 Press the INFO button. The information appears at the bottom 
of the screen. 

2 Press the INFO button again to hide the information. 

NOTE The information may not correctly display depending on the content 
or media server. Certain processes may take some time to complete. 

File specifications: 

USB use: 

❖ Data compatibility: JPEG Exif ver 2.2 

❖ File format: JPEG 

❖ Maximum viewable resolution: 8192 xl6384 

❖ Maximum number of files: 2000 per folder 
Content on Connected Media Server: 

❖ Data compatibility: JPEG EXIF Ver. 1.x or later, JFIF 1.02a 

❖ File format: JPEG 

❖ Maximum photo resolution: 4096 x 4096 

❖ Maximum photo size: 9MB 

❖ Maximum number of files: 2000 per folder 

If a photo resolution is larger than 1024 x 768, the photo will be 
resized by the server before being displayed. 


NOTE 







Advanced features 

Search 



Search 


To search for content, 

1 

Select the search. 

2 

Enter in keywords and the search will search for: 

❖ Videos; Title name 

❖ Music; Title name/Artist name/ Album name 

❖ Photos; Title name 

❖ USB; Videos/Music/Photos; File name 

NOTE 

Folders are not subject to the search function. 

3 

The retrieval result is displayed. 

4 

Select one of the search results. 

5 

The selected content will play. 

NOTE 

The search retrieval stops when content is being played. 


Network Device Setup 

In order to set the access the External Control Setup, Media 
Renderer Setup, or Device Name Setup, you must use the Network 
Device Setup menu. 

External Control Setup 

1 Press the MENU button. Select NETWORK, Network 
Device Setup and press the OK button. 

2 Select External Control Setup, and press the OK button. 

3 Use the (4/^ arrow) buttons to select and set Enable Control 
to On or Off. 

To access the Home Control Profile: 

1 Press the MENU button. Select NETWORK, Network 
Device Setup and press the OK button to select. 

2 Use the (^/ ► arrow) buttons to select Home Control Profile 
and press the OK button. 

The Home Control Profile window will appear. 




168 


Advanced features 

Network De\>ice Setup 


3 Use the (A/T/ ^/^ arrow) buttons to navigate to the User 
Name or Password field. The keypad will appear so that you 
can enter in the user name and password. You can use the 
remote control keypad, the software keypad, or the 
USB/QWERTY keyboard to enter in the user name and 
password. 

❖ To use the remote control keypad, use the remote control 
up/down buttons to enter the name and password, and 
press the BLUE button. 

❖ To use the software keyboard, press the GREEN button. 
Use the number and letter buttons to enter in the user name 
and password, and press the BLUE button to submit. 

❖ To use the USB/QWERTY keyboard, use the number and 
letter buttons to enter in the user name and password, and 
press the ENTER button to submit. 

N OT E Only the 0-9 and capital/lowercase A-Z characters may be used for 
the user name and password. 


Setting up the Media Renderer feature 

The TV can be configured as a Media Renderer. When operating as 

a Media Renderer, the TV displays content provided by a Media 

Server. The selection of the media is done by the Media Controller. 

The TV can play photo, movie, or audio files when operating as a 

Media Renderer. 

Installation 

You can configure the Media Renderer settings individually, or use 

Installation mode to be prompted for each setting in order. 

1 Press the MENU button. Select NETWORK, Network 
Device Setup, and then press the OK button. 

2 Press the (A/T arrow) buttons to select Media Renderer 
Setup, and then press the OK button. 

3 Press the (A/T arrow) buttons to select Installation, and then 
press the OK button. 

4 Press the (A/T arrow) buttons to select On, and then press the 
OK button. If you want to change the device name as a Media 
Renderer, highlight the Device Name field and press the OK 
button. The Software Keyboard screen appears. 


Advanced features 

Network Device Setup 


169 


5 Input the device name by using the Software Keyboard. To 
save your setting, press the BLUE button. 

6 Select Done. Press the OK button. 

7 If you want to limit access from unexpected Media Controllers, 
press the arrow) buttons to select On. Press the OK 
button. 

8 If you want to proceed with registration of Media Controllers, 
press the arrow) buttons to select Yes. Press the OK 
button. 

9 Press the (A/T arrow) buttons to select the MAC address of 
the Media Controller you want to accept. Press the OK button. 
The box is selected. To clear the selection, press the OK 
button. 

10 Press the right arrow button to select Done. Press the OK 
button. 

11 Press the (A/Y arrow) buttons to adjust to the desired volume. 
Press the OK button. 

12 If you want to wake up the TV by using the Media Controller, 
press the arrow) buttons to select Yes. Press the OK 
button. 

Device Name setup 

The device name as a Media Renderer can be changed. 

1 Press the MENU button. Select NETWORK, Network 
Device Setup, and then press the OK button. 

2 Press the (A/T arrow) buttons to select Device Name Setup, 
and then press the OK button. 

3 Select the Device Name field. Press the OK button. The 
Software Keyboard screen appears. 

4 Input the device name by using the Software Keyboard. To 
save your setting, press the BLUE button. 

5 Select Done. Press the OK button. 


OTE 


The maximum number of characters allowed for the device name is 
15. Only 0-9, A - Z can be used in the device name. 



170 


Advanced features 

Network De\>ice Setup 


Media Controller setup 

You can limit which Media Controller can control this TV. If 
Access Control is enabled, only those Media Controllers with a 
check will be allowed to control the TV. 

1 Press the MENU button. Select NETWORK, Network 
Device Setup, and then press the OK button. 

2 Press the (A/Y arrow) buttons to select Media Renderer 
Setup, and then press the OK button. 

3 Press the (A/Y arrow) buttons to select Media Controller 
Setup. Press the OK button. 

4 Press the (A/Y arrow) buttons to highlight Access Control. 
Press the (► arrow) buttons to select On. 

5 Press the ( A/Y arrow) buttons to select Media Controller. 
Press the OK button. 

6 Press the (A/Y arrow) buttons to select the MAC address of 
Media Controller you want to accept. 

7 Press the OK button. The box is selected. To clear the 
selection, press the OK button. 

8 Press the right arrow button to select Done. Press the OK 
button. 


NOTE 


❖ You can select up to 8 Media Controllers. 

❖ If you would not like to limit the Media Controllers for this TV, 
set Access Control to Off. 

❖ Devices other than Media Controller may be displayed in the list. 

❖ Confirm the MAC address of Media Controller and select it. 


Maximum volume setup 

This feature allows you to set the maximum volume of the TV 
when it receives volume operation commands from a Media 
Controller. 

1 Press the MENU button. Select NETWORK, Network 
Device Setup, and then press the OK button. 

2 Press the (A/Y arrow) buttons to select Media Renderer 
Setup, and then press the OK button. 

3 Press the (A/Y arrow) buttons to highlight Maximum 
Volume Setup. 




Advanced features 

Toshiba A/V Remote App 


171 


4 Press the arrow) buttons to adjust to the desired volume. 


note The TV's remote control can set volume regardless of the value of 
Maximum Volume Setup 


Apps Control Profile 

To select the Apps Control Profile 

1 Press the MENU button. Select NETWORK, Network 
Device Setup and press the OK button. 

2 Use the (A/V arrow) buttons to select Apps Control Profile 
and press the OK button. 

The Apps Control Profile window will appear. 

3 Use the (A/V arrow) buttons to select Device Registration 
Setup and press the OK button. 

The Device Registration Setup window will appear. 

4 Use the (A/V arrow) buttons to highlight the Companion 
Device ID. 

5 Select the Cancel, All, or Delete buttons. 

To enable the New Device Detection: 

1 Press the MENU button. Select NETWORK, Network 
Device Setup and press the OK button to select. 

2 Use the (^/ ► arrow) buttons to select Apps Control Profile 
and press the OK button. 

The Apps Control Profile window will appear. 

3 Use the (A/V arrow) buttons to select New Device Detection 
and press the OK button. 

4 Use the (^/ ► arrow) buttons to select Enable or Disable. 

5 Press the OK button to submit. 

Toshiba A/V Remote App 

The Toshiba A/V Remote App is available for compatible Toshiba 
equipment using compatible tablets and smartphones powered by 
Android™ These devices must be running the Android™ 
application Honeycomb or higher. You must download the Toshiba 
A/V Remote App through the Android™ Marketplace. 



172 


Advanced features 

Toshiba A/V Remote App 


NOTE 


❖ Third party Internet services are not provided by Toshiba, may 
change or be discontinued at any time and may be subject to 
Internet service provider restrictions.Toshiba makes no 
warranties, representations, or assurances about the content, 
availability or functionality of third-party content or services. Use 
of third party Internet services may require the creation of a 
separate account through a computer with Internet access and/or 
payment of one-time and/or recurring charges and membership. 
Not all third party services may be available on or compatible 
with this product. In order to experience the full suggested 
capabilities of this product, fully-compatible devices may be 
required. 

❖ The Toshiba A/V Remote App can only be used when your TV 
and your tablet or smartphone are connected to the Internet. 

❖ Starting and operation of this service may take several minutes. 

❖ Software updates may be needed in order to use this service. 

❖ In order to experience the full suggested capabilities of this 
product, fully-compatible devices may be required. Certain 
features may not be available in all countries. 


Initial setup 

In order to use this application, your Android™ device and 
compatible Toshiba equipment must be connected to the wireless 
LAN in your home. After downloading the Toshiba A/V Remote 
App, follow these steps: 

1 Read the disclaimer and select the Agree option. 

2 The Toshiba equipment’s name will appear in the terminal 
window of the device powered by Android™. 


Advanced features 

Toshiba A/V Remote App 


173 


3 Select the desired Toshiba equipment from the list. 



(Sample Illustration) Toshiba AAV Remote App—Device Select 
screen 

4 Activate the selected device by entering in the a 4-digit PIN 
code on the pop-up window on the tablet or smartphone. Press 
the OK button on the tablet or smartphone screen. 


I pm 

Wmk entn the PIN d.«pl*^d on yow TV wwi 



(Sample Illustration) Toshiba A/V Remote App—Input PIN code 
screen 


Controlling devices 

After the devices have been setup, you can control the compatible 
devices through the Toshiba A/V Remote App. 

To control the devices, you should first select the type of device 
you wish to control from the top bar. These devices will vary 
depending on what devices were added. These controls are also 
described in “Learning about the remote control” on page 49. 





174 


Advanced features 

Toshiba A/V Remote App 


The device control page will show several controls, depending on 
the device. Some of these controls may include: 

❖ Number keypad —to enter in 0-9 digit numbers 

❖ INPUT —Selects the video input source. 

❖ CH Up/Down —Cycles through programmed channels. 

❖ APPS —launches the apps on-screen. 

❖ ePORTAL —Launches the eMANUAL application on-screen. 

❖ INTERNET —Launches the web browser on-screen. 

❖ SEARCH —Accesses the Search All function 

❖ QUICK —Launches the Quick menu. 

❖ 3D button —Accesses the 3D options. 

❖ PIC MODE —Selects the picture mode. 

❖ PIC SIZE —Cycles through the picture sizes. 

❖ INFO —displays TV status information as well as program 
details, when available. 

❖ SLEEP —Accesses the sleep timer. 

❖ CC button —Accesses the closed-caption feature. 

❖ Red/Green/Yellow/Blue color buttons 

❖ Navigational controls —the (A/T/^/ ► arrow) buttons for 
on-screen menus. 

❖ MENU —Accesses the main TV menu system. 

❖ GUIDE —Launches the Toshiba MediaGuide application on¬ 
screen. 

❖ BACK —Returns to the previous screen. 

❖ EXIT —Closes on-screen menus. 

❖ OK —Activates highlighted items in the main menu system. 

❖ Playback controls —controls playback through 
Pause/Play/Record/Rewind/Skip Back/Fast Forward/Skip 
forward. 

❖ TV Control —these buttons control the volume on the TV and 
its Sleep and Power functions. 


Advanced features 

Toshiba A/V Remote App 


175 


In addition, the Toshiba A/V Remote App also includes a text 
input, mouse control and a touchpad control that allows you to use 
your tablet or smartphone as a touch screen 



TV Control 

— VOL -f 

MUTE SLEEP 

6 


• 



- 2 



(Sample Illustration)—Toshiba AAV Remote App device control 
page 


Text input 

The text input screen displays a QWERTY keyboard on the tablet 
or smartphone that allows you to create text by either typing it in or 
using the voice to text feature on the device powered by Android™ 



Tab 

q 

w 


e 

r t 

y 

u 

i 

0 

P «■ 

7123 

a 

i 

l 

d f 

9 

h 

j 

k 

1 

4— 

O 


z 

X 


c V 

b 

n 

m 

. 


O 

4 


:*) 

/ 



• 

- 

1 


- Q O - B TSOtl 


(Sample Illustration) Toshiba A/V Remote App text input screen 


Mouse control 

The mouse control button allows you to control the cursor on the 
display while viewing the browser. The controls include: 

❖ Touchpad surface —controlling the mouse through touch 








Advanced features 

Toshiba A/V Remote App 


❖ Keyboard button —displays the keyboard onscreen 

❖ Left mouse click button —left-clicks on the selected item 

❖ Right mouse click button —right-clicks on the selected item 



(Sample Illustration) Toshiba A/V Remote App mouse control 
screen 


Touchpad control 

The touchpad control allows you to control the screen using your 
finger. 



(Sample Illustration) Toshiba AJV Remote App touchpad control 


Combo 


The Toshiba A/V Remote App also allows you to control up to four 
devices in one screen. 





Advanced features 

Toshiba A/V Remote App 


177 


For example, you can have the controls for the TV, cable box, 
satellite box, and Blu-ray™ all on one screen. 



(Sample Illustration) A/V REMOTE Apps Combo screen. 

Toshiba MediaGuide app 

There are four screens modes which display detailed information 
such as TV Listings, TV Portal, Movies Portal, and Search. The 
screen modes can be changed using a left or right swipe of the 
switch bar at the top of the screen on the compatible device 
powered by Android™. 

The switch bar contains three areas which can be selected or 
changed by swiping the bar. 

❖ The first bar is the main bar that lists: TV Listings, TV Portal, 
Movies Portal, and Search. 

❖ The second bar is the Genre Bar which groups items into 
categories such as Music, All, Favorites, etc. These groups are 
used to display similar content for faster browsing on the grid. 

❖ The third bar is the date and time bar. This bar allows you to 
advance through the days ahead to see future programming. 
You can also use the Now and Jump buttons to quickly return 
the present time and day (Now button) and to advance to a 
future day and/or time (Jump button) 

TV listings 

In this menu the TV listings are displayed in a grid format, which is 
easily controlled by swiping up, down, left, and right with your 
finger on your Toshiba compatible device. 




















178 


Advanced features 

Toshiba Send & Play App 


Popup and detailed information 

When you tap or touch and hold a TV program listing, it will show 
more information about the selected program in a screen overlay. 
From this screen, you can decide whether to watch the program by 
selecting the Watch button or select the More button. The More 
button will bring up more details and options available for that 
selected item. 

Genre Bar screen 

You can group the TV channels list by genre and filter it by swiping 
the genre bar. You can select which genres display in this bar with 
the genre selection feature. 

To change genre settings, select the Settings icon in upper right 
corner, then EPG Settings, Genre Selection. 

If you touch and hold a channel logo, it is registered as a Favorite. 
The registered channel can be seen in Genre Bar Favorites. 

Movies/TV portal screen 

You can select from the Movie or the TV program Hotlist, their 
Portals, or the Reminders as desired. You can browse a list of 
programs that match the registered keyword in the Favorite 
Keywords settings. 

Search screen 

You can search by keyword for TV programs, movies, or names of 
actors for detailed information. 

Detail screen 

In the details screen, you can browse program and celebrity 
information, such as celebrities associated with a program, photos 
associated with a program, airing information for a specific 
program, programs associated with a celebrity, or photos associated 
with a celebrity. 

Toshiba Send & Play App 

The Toshiba Send & Play App allows you to share a URL from 
your tablet or your smartphone to your Smart TV. This app is 
available for compatible Toshiba equipment and compatible tablets 
and powered by Android™. These devices must be running the 
Android™ application Honeycomb or higher. You must download 
the Toshiba Send & Play App through the Android™ Marketplace. 


Advanced features 

Toshiba Send & Play App 


179 


NOTE 


❖ Third party Internet services are not provided by Toshiba, may 
change or be discontinued at any time and may be subject to 
Internet service provider restrictions. Toshiba makes no 
warranties, representations, or assurances about the content, 
availability orfunctionality of third-party content or services. Use 
of third party Internet services may require the creation of a 
separate account through a computer with Internet access and/or 
payment of one-time and/or recurring charges and membership. 
Not all third party services may be available on or compatible 
with this product. In order to experience the full suggested 
capabilities of this product, fuliy-compatible devices may be 
required. 

❖ The Toshiba Send & Play App can only be used when your TV 
and your tablet or smartphone are connected to the Internet. 

❖ Starting and operation of this service may take several minutes. 

❖ Software updates may be needed in order to use this service. 

❖ In order to experience the full suggested capabilities of this 
product, fuliy-compatible devices may be required. Certain 
features may not be available in all countries. 


Launching the app 

In order to use this application, your Android™ device and 
compatible Toshiba equipment must be connected to the wireless 
LAN in your home. After downloading the Toshiba Send & Play 
App, follow these steps: 

1 Open the web page on your tablet or smartphone using the 
Toshiba Send & Play app. 

2 Select a bookmark from the list or type in the URL on the 
Toshiba Send & Play address bar. 




180 


Advanced features 

Toshiba Send & Play App 


3 Once the page has been loaded, tap the Send icon to send the 
website/URL to the TV. 



(Sample Illustration) Toshiba Send & Play browser screen 
4 The website/URL will automatically launch on the TV. 


N ot E Some web pages or URLs may not launch, depending on the TV 
status. 

After the web page is sent to the TV, you can use the mouse 
emulation screen to navigate the website. 

1 Press the Mouse emulation button. 

2 The mouse emulation screen will appear on the tablet or 
smartphone compatible device powered by Android™. 

The mouse control screen allows you to control the cursor on the 
display while viewing the browser. The controls include 

❖ Touchpad surface —controlling the mouse through touch 

❖ Keyboard button —displays the keyboard onscreen 

❖ Left mouse click button —left-clicks on the selected item 

❖ Right mouse click button —right-clicks on the selected item 

Text input 

The text input screen displays a QWERTY keyboard on the 
compatible tablet or smartphone that allows you to create text by 
either typing it in or using the voice to text feature on the device 
powered by Android™. 


















Chapter 9 


Troubleshooting 


General troubleshooting 

Before calling a service technician, review this chapter or visit the 
Toshiba technical support Web site at support.toshiba.com for 
possible causes/solutions for the problem you are experiencing. 

Before you begin to troubleshoot any problem, first unplug the TV 
from the AC wall outlet, wait approximately one minute, and then 
plug the TV back into the AC wall outlet. If the problem still exists 
attempt to troubleshoot the problem. 

Black box on screen. 

The closed caption feature is set to one of the Text modes (Tl, T2, 
T3, or T4). Set the closed caption feature to Off, see “Using closed 
captions” on page 87. 

TV stops responding to controls. 

If the TV stops responding to the buttons on the remote control or 
TV control panel and you cannot turn off the TV, press and hold 
POWER button on the TV control panel for several seconds to reset 
the TV. If the TV does not power off using this method, unplug the 
TV from the AC wall outlet and plug it back in. 

If you cause a static discharge when touching the TV and the TV 
fails to function, simply unplug the TV from the AC outlet and plug 
it back in. The TV should return to normal operation. 


181 



Troubleshooting 

Picture problems 


Other problems. 

If your TV’s problem is not addressed in this Troubleshooting 
chapter or the recommended solution has not worked, use the Reset 
Factory Defaults procedure, see “Resetting to Factory Defaults” on 
page 107. 

TV will not turn on. 

Ensure the power cord is plugged in properly, and then press the 
POWER button. 

Replace the batteries in the remote control, see “Installing 
batteries” on page 46. 

Try the control panel buttons on the TV. 

3D problems. 

Watch the TV at a proper viewing angle and distance, see “Safety 
Precautions for 3D glasses” on page 6. 

If 3D images are not correct, the 3D format may be different. 
Change the 3D format in the Quick menu, see “Selecting 3D format 
from the Quick menu in 3D mode” on page 78. 

The left and right sides of 3D images may be reversed. Switch the 
left and right, see “Switching left and right images” on page 85. 

If 2D images are not correct, the 2D format may be different. 
Change the 2D format in the Quick menu, see “Selecting 2D format 
from the Quick menu in 2D mode” on page 79. 

Remove all obstructions between the 3D glasses and the TV. 

If there is no power to the 3D glasses, charge the battery. 

Picture problems 

General picture problems. 

Check the antenna/cable connections, see “Connecting Your TV” 
on page 27. 

Press the INPUT button on the remote control or on the TV and 
select a valid video input source, see “Selecting the video input to 
view” on page 86. If no device is connected to an input on the TV, 
no picture appears when you select that particular input source. For 
device connection details, see “Connecting Your TV” on page 27. 

Antenna reception may be poor. Use a highly directional outdoor 
antenna (if applicable). 

The station may be having broadcast difficulties. Try another 
channel. 


Troubleshooting 

Picture problems 



Adjust the picture quality, see “Using the advanced picture settings 
features” on page 117. 

If Edge Booster does not achieve a sharper picture, change the 
Sharpness value to increase the sharpness level, see “Edge 
Enhancer” on page 117. 

Video Input Selection problems. 

If the Input Selection window does not appear when you press the 
INPUT button on the remote control or the TV control panel, press 
the INPUT button a second time. The TV displays the next video 
input source and the Input Selection screen. 

Cannot view external signals or channel 3 or 4. 

If you cannot view signals from external devices connected to 
VIDEO 1, VIDEO 2, ColorStream HD1, ColorStream HD2, HDMI 
1, HDMI 2, HDMI 3, HDMI 4, PC, or from channel 3 or 4, ensure 
that the Input Lock is set to Off, see “Locking video inputs” on 
page 96. 

Poor display color or no color. 

The station may be having broadcast difficulties. Try another 
channel. 

Check the Input mode when you use Shared Inputs, see 
“Configuring shared inputs” on page 70. 

Adjust the Tint and/or Color, see “ColorMaster™” on page 121. 

Poor composite picture. 

If the TV is connected to an external A/V device (e.g. DVD player, 
video game system, set-top box, etc.) try using a ColorStream or 
HDMI™ video connection instead. 

Picture and sound are out of sync. 

As with all products that contain a digital display, this may occur in 
rare instances, when viewing certain content (e.g. television 
broadcasts, video games, DVDs). The cause may include, without 
limitation, video processing within the TV, video processing in an 
attached gaming system, and video processing or different 
compression rates used by broadcasters in their programming. 

Try the following: 

❖ If the TV is connected to an A/V receiver that has a 
programmable audio delay feature, use this feature to help 
synchronize the sound to the picture. 

❖ If the problem occurs only on certain TV channels, inform 
your local broadcast, cable, or satellite provider. 




Troubleshooting 

Sound problems 


❖ The settings of Side Shared Audio and Rear Shared Audio may 
be not correct. Check the connections, see “Connecting a 
digital audio system” on page 35. 

❖ Turn off and unplug the TV from the AC wall outlet for a few 
seconds and plug it back in. 

Sound problems 

Check the antenna/cable connections, see “Connecting a digital 
audio system” on page 35. 

The station may be having broadcast difficulties. Try another 
channel. 

The sound may be muted. Press the VOL (+ -) buttons. 

If you connect a computer using either the PC IN terminal or an 
HDMI® terminal, make sure that the Rear Shared Audio setting is 
properly set, see “Connecting a digital audio system” on page 35. 

Remote control problems 

Ensure that the remote control is set to the correct device mode, see 
“Learning about the remote control” on page 49. 

Remove all obstructions between the remote control and the TV. 

Replace the remote control’s batteries, see “Installing batteries” on 
page 46. 

Your TV’s remote control may not operate certain features on your 
external device. Refer to the owner’s manual for your other device 
to determine its available features. If your TV remote control does 
not operate a specific feature on another device, use the remote 
control that came with the device, see “Learning about the remote 
control” on page 49. 

If the TV still does not act as expected, perform the Reset Factory 
Defaults procedure, see “Resetting to Factory Defaults” on 
page 107. 

Channel tuning problems 

Ensure that the remote control is set to the correct device mode, see 
“Learning about the remote control” on page 49. 

The Auto Tuning feature may have erased the channel from 
memory. Add the channel to the channel memory, see “Using 
SurfLock™” on page 85. 

The Lock feature may have blocked the channel. Unblock the 
channel, see “Using SurfLock™” on page 85. 


Troubleshooting 

Closed caption problems 



If you cannot tune digital channels, check the antenna 
configuration, see "Initial setup” on page 51. If the problem 
persists, clear all channels from the channel list and reprogram 
channels into memory, see “Storing channels in memory 
(optional)” on page 66. For additional information, see “TV stops 
responding to controls.” on page 181. If the problem persists, use 
the Reset Factory Defaults procedure, see “Resetting to Factory 
Defaults” on page 107. 

Closed caption problems 

If the program or video you have selected is not closed captioned, 
no captions appear on the screen. 

If text is not available, a black rectangle may appear. If this 
happens, turn off the closed caption feature, see “Using closed 
captions” on page 87. 

A closed caption signal may not display correctly under the 
following circumstances: 

❖ The recording is dubbed 

❖ The signal reception is weak 

❖ The signal reception is nonstandard 

For additional information, see “Using closed captions” on page 87. 

Rating blocking (V-Chip) problems 

Forgotten PIN code. 

When the PIN code screen appears, press the INFO button 4 times 
within approximately 5 seconds. The old PIN code is cleared, see 
“Forgotten PIN code” on page 91. 

The V-Chip feature is available for U.S. V-Chip systems only, see 
“Using parental controls” on page 91. 

HDMI® CEC Control operation 

HDMI® CEC Control feature is available for Toshiba HDMI® CEC 
compatible devices. 

HDMI® cables. 

Ensure that HDMI® cables with the (HDITir) Logo are used. 

The HDMI® CEC operation is not working correctly. 

When the connected HDMI® CEC device does not work correctly 
after you have changed the device’s settings, turn off the TV and 




Troubleshooting 

HDMI® problems 


unplug the power cord. After approximately one minute, plug the 
power cord in and turn on the TV. 

If several devices are connected, the HDMI® CEC Control feature 
may not operate properly. 

Read the instruction manual of the connected HDMI® CEC device. 

HDMI® problems 

HDMI® cables. 

Ensure that HDMI® cables with the (HOmi) Logo are used, see 
“Connecting an HDMI® or DVI device to the HDMI® input” on 
page 36. 

Network problems 

Cannot connect to the Internet. 

Check the modem and its incoming cable/telephone connections, 
see “Connecting to a home network” on page 42. 

Confirm your modem’s operation. 

Ensure your IP address is set up correctly. 

No network connection. 

If using a wired network connection, check to ensure that the LAN 
cables are connected properly, see “Connecting the TV to a home 
network with an Internet connection - wired” on page 44. 

Ensure that the modem and router power cords are plugged in and 
the devices are operating properly. 

Ensure that your IP address is set up correctly, see “IP Address 
Setup” on page 136. 

Check to ensure proper operation of other network connected 
devices. 

Network Setup fails (Auto). 

Check to ensure that the LAN cables are connected properly, see 
“Connecting the TV to a home network with an Internet connection 
- wired” on page 44. 

DHCP is not enabled on the router, or no router is present. Refer to 
your router’s documentation for instructions on enabling DHCP. If 
your router does not support DHCP, you must manually set up the 
IP address. 

Internet service is not available. Check your cable/DSL modem or 
contact your ISP for Internet service issues. 


Troubleshooting 

Network problems 



Network Setup fails (Manual). 

Ensure that the TV IP address is not the same as any other device 
on the network. 

❖ Example: IP address 192.168.0.100 and IP address 
192.168.0.101 are different addresses on the same network. 

Make sure the TV IP address is on the same subnet as the 
networked computer. 

❖ Example of proper setup: The computer has the IP address 
192.168.0.100 with the Subnet mask 255.255.255.0, the TV 
has the IP address 192.168.0.101 with the Subnet mask 
255.255.255.0; both are on the same subnet. 

❖ Example of improper setup: The computer has the IP address 
192.168.1.100 with the Subnet mask 255.255.255.0, the TV 
has the IP address 192.168.0.101 with the Subnet mask 
255.255.253.0; they are on different subnets. 

Unstable network connection. 

When using a wired home network connection, unplug the LAN 
cables, and then reconnect them. 

When using a wireless home network connection: 

❖ Reboot the router: 

1 Remove AC power from the router and the television for 
approximately one minute. 

2 Reconnect AC power to the router. 

3 Reconnect AC power to the television and turn it On. 

4 After approximately two minutes, check connection 
stability. 

❖ Connect with LAN cables, if possible, and check connection 
stability. 

❖ Repeat the wireless network setup procedure and check 
connection stability. 

The media server name is not displayed. 

The LAN cables, if used, are not connected properly, see 
“Connecting the TV to a home network with an Internet connection 
- wired” on page 44. 

The WLAN, if used, is not configured properly. 

The network setup on the Server is incorrect. Make sure both the 
media server and TV are using the same network type (DHCP/ 
manual) and have compatible network settings. 



Troubleshooting 

Wireless network problems 


Too many devices are connected. You cannot connect more than 32 
sharing devices at one time. 

The media server is not turned On. 

The “server” is not a media server device. 

Check the firewall and streaming settings on the media server. 

Wireless network problems 

Check that the router/AP (Access point) power is On. 

After starting wireless network setup, confirm that the network is 
configured properly by performing the network connection test, see 
“Network Connection Test” on page 139. 

Check the router/AP’s connection status. 

If the router/AP does not support PBC or WPS, Easy Setup (PBC) 
will not work even if the push-button is pressed, see “Wireless 
Setup” on page 131. 

If the available router/AP list is not displayed in Easy Setup (PBC) 
or Assisted Setup, the power of the router/AP may be Off. Check 
that it is On, and then try restarting the scan for available 
routers/APs, see “Easy Setup using PBC (Push button 
configuration)” on page 131. 

Refer to the router/AP’s instruction manual. 

MediaShare (Media Player) problems 

Ensure that the devices (Display and Server) are connected 
correctly. 

Incorrect functionality may occur when using a USB HUB 
connection. 

Photo files that were processed and edited using the computer’s 
application software may not be viewable. 

When viewing content that supports two or more formats the 
display may select one format automatically. 

Copyright protected content stored on the media server may not be 
playable on the display. 

Content playback stability may be affected by heavy network 
traffic. 

Content originally recorded on a computer may not play correctly. 
Set the media sharing of the media server to the correct settings, 
according to the media server instruction manual. 


Troubleshooting 

Light Indicator 



Confirm that the contents of either the media server or the USB 
storage device are in formats that are supported by this TV, see 
“MediaShare (Media Player) specifications” on page 157. 

Depending on the media server, access may be limited by the MAC 
address. Set the server according to the media server’s instruction 
manual. This TV’s MAC Address can be confirmed in the Network 
Setup portion of the User Menu, see “MAC Address” on page 138. 

For Connected MediaShare (Media Player) 

Depending on the media server, it may take time to display the list. 

Media Renderer 

Depending the state of this TV, Media Controller may not be able 
to control a Media Renderer playback. 

If Media Renderer playback starts regardless of the user's intention, 
check the access control of Media Renderer or set Media Renderer 
to Off. 

If you use a wireless access point without encryption, there is the 
risk that your Media Renderer device could be controlled by an 
unknown Media Controller. You can protect your Media Renderer 
device by going to NETWORK> Network Device Setup> Media 
Renderer Setup> Media Controller Setup and limit the 
authorized Media Controller devices, see “Media Controller setup” 
on page 170. 

Light Indicator 

The Power light on the front of the TV indicates the TV’s status, as 
described below. 

Power On/Standby light 

Green: 

❖ The TV is On and operating properly. 

No light: 

❖ The power is Off or in Standby. 

Green flashing: 

❖ The system is booting. The screen appears after a short wait. 

❖ The fan has stopped. Turn off the TV and unplug the power 
cord. After approximately one minute, plug the power cord in 
again and turn on the TV. 

Red flashing: 


190 


Troubleshooting 

If the problem persists after trying the solutions 


❖ Power On failure. Turn off the TV and unplug the power cord. 
After approximately one minute, plug the power cord in again 
and turn on the TV. 

If the problem persists after trying the solutions 

In the U.S., visit TAIS Consumer Solutions on the web at 
support.toshiba.com or call 800-631-3811. 

In Canada, locate the nearest Toshiba authorized service depot. 
Visit www.toshiba.ca; click “Home Entertainment,” and then click 
“Support.” 


Appendix A 


Specifications 


NOTE 


❖ This model complies with the specifications listed below. 

❖ Designs and specifications are subject to change without notice. 

❖ This model may not be compatible with features and/or 
specifications that may be added in the future. 


Television system 


NTSC standard 


ATSC standard 

8VSB 

Digital Cable 

64 QAM, 256 QAM; in-the-clear, unencrypted 


Channel coverage 


VHF 

2 through 13 

UHF 

14 through 69 

Cable TV 

Mid band (A-8 through A-l, A through I) 

Super band (J through W) 

Hyper band (AA through ZZ, AAA, BBB) 

Ultra band (65 through 94, 100 through 135) 


191 
















Specifications 

Power source 


Power source 

120 V AC, 60 Hz 

Power consumption 


42L6200U 

0.8 A (maximum current) 

0.3 W in Standby mode 

47L6200U 

0.9 A (maximum current) 

0.3 W in Standby mode 

55L6200U 

1.0 A (maximum current) 

0.3 W in Standby mode 

47L7200U 

1.2 A (maximum current) 

0.3 W in Standby mode 

55L7200U 

1.4 A (maximum current) 

0.3 W in Standby mode 


Audio power 


42L6200U 

10W+10W 

47L6200U 

10W+10W 

55L6200U 

10W+10W 

47L7200U 

10W+10W 

55L7200U 

10W+10W 


Speaker type 


42L6200U 

Tweeter 8.2cm x 3.4cm (3 1/4 x 1 1/3 inch) x 2 pcs 

Woofer 3.9cm x 1.6cm (1/12 x 3/5 inch) x 2 pcs 

47L6200U 

Tweeter 8.2cm x 3.4cm (3 1/4 x 1 1/3 inch) x 2 pcs 

Woofer 3.9cm x 1.6cm (1/12 x 3/5 inch) x 2 pcs 

55L6200U 

Tweeter 8.2cm x 3.4cm (3 1/4 x 1 1/3 inch) x 2 pcs 

Woofer 3.9cm x 1.6cm (1/12 x 3/5 inch) x 2 pcs 

47L7200U 

Tweeter 8.2cm x 3.4cm (3 1/4 x 1 1/3 inch) x 2 pcs 

Woofer 3.9cm x 1.6cm (1/12 x 3/5 inch) x 2 pcs 

55L7200U 

Tweeter 8.2cm x 3.4cm (3 1/4 x 1 1/3 inch) x 2 pcs 

Woofer 3.9cm x 1.6cm (1/12 x 3/5 inch) x 2 pcs 

























Specifications 

Video/audio terminals 



Video/audio terminals 

Video/audio input 


Video 

1 V (p-p), 75 ohm, negative sync. 

Audio 

200 mV (nns) (-20dBFS) 


ColorStream® (component video) HD input 


Video 

Y: IV (p-p), 75 ohm 

Pr: 0.7V (p-p), 75 ohm 

Pb: 0.7V (p-p), 75 ohm 

Suggested formats: 1080i, 720p, 480p, 480i 

Audio 

200 mV (rms) 22 k ohm or greater 


HDMI® input 


HDMI® compliant 


HDCP compliant 


Suggested formats 

See table on page 195 

HDMI® Audio 

Dolby® Digital and 2-channel Linear-PCM; 32/44.1/48 kHz 
sampling frequency; 16/20/24 bits per sample 


Digital audio output 

Optical type 


PC input 

15-Pin D-sub Analog RGB 

Wireless connection 


Standard 

IEEE 802.lla/b/g/n/ 

Host Interface 

USB 2.0 compatible 

Frequency Range 

5.15-5.35 GHz, 5.47-5.725 GHz, 5.725-5.850 GHz, 
2.400-2.473 GHz 

Security 

WEP 64/128, TRIP, AES, WPA/WPA2-PSK, WPS, None 






















Specifications 

Dimensions (include foot stand) 


Ethernet 

IEEE 802.3. 

USB 


Universal Serial Bus Specification, Revison 1.1. 
Universal Serial Bus Specification, Revison 2.0. 

Dimensions (include foot stand) 


42L6200U 

Width 

37.59” (954.7 mm) 

Height 

24.85” (631.1 mm) 

Depth 

8.43” (214.12 mm) 

47L6200U 

Width 

41.90” (1064.2 mm) 

Height 

27.39” (695.7 mm) 

Depth 

9.25” (234.9 mm) 

55L6200U 

Width 

48.59" (1234.1 mm) 

Height 

31.30" (795 mm) 

Depth 

11.29" (286.7 mm) 

47L7200U 

Width 

41.90" (1064.2 mm) 

Height 

27.39" (695.7 mm) 

Depth 

9.25" (234.9 mm) 

55L7200U 

Width 

48.59" (1234.1 mm) 

Height 

31.30" (795mm) 

Depth 

11.33" (287.7 mm) 


Mass (weight) 


42L6200U 

29.54 lbs (13.3 kg) 

47L6200U 

35.93 lbs (16.2 kg) 

55L6200U 

51.59 lbs (23.4 kg) 

47L7200U 

37.48 lbs (17 kg) 

55L7200U 

55.56 lbs (25.2 kg) 


Operating conditions 


Temperature 

32° - 95° F (0° - 35° C) 

Humidity 

20 - 80% (no moisture condensation) 




























Specifications 

Sillied accessories 



Supplied accessories 

❖ Remote control with two size “AA” batteries 

❖ L7200U model number: CT-90395 

❖ L6200U model number: CT-90408 

❖ Resource Guide 

❖ Pedestal and hardware 

❖ Warranty 

❖ Wireless QWERTY keyboard (2x AAA batteries) 

❖ 1R blaster cable 

❖ AV adapter cables 

❖ Component adapter cable 

❖ Four pairs of 3D glasses 

note The USB QWERTY keyboard supplied with this TV is a standard U.S. 
layout keyboard. The accented characters for French and Spanish 
may not be available in certain cases. 


Acceptable signal formats for PC IN, HDMI®, and 3D 

PC IN signal formats 


NOTE 


❖ The PC IN on this TV only accepts signal formats which are 
compliant with VESA-DMT as in the table below. Since some 
PCs input signals are different from the resolution and frequency 
described in the table below, the following problems may occur: 
incorrect display, false format detection, picture position failure, 
blur, or judder. In these cases, set the monitor output format on 
your computer to conform to any of the signals in the table 
below. 

❖ The signals whose vertical frequency is 56 Hz, 70 Hz, 72 Hz, or 
75 Hz are converted to a 60 Hz signal. 

❖ When you connect a computer to this TV, it is recommended that 
you set the refresh rate of your computer to 60 Hz. 

❖ The PC IN on this TV does not accept the Sync on Green, 
Composite Sync, and Interlace signals. 





Specifications 

Acceptable signal formats for PC IN, HDMI®, aid 3D 



Fonnat Resolution V. Frequency FI. Frequency 

Pixel Clock 
Frequency 

VESA 

Standard 

(DMT) 

VGA 

640 x 480 

59.940/60 Hz 

31.469/31.500 kHz 

25.175/25.200 MHz 

TBD 



72.809 Hz 

37.861 kHz 

31.500 MHz 

TBD 



75.000 Hz 

37.500 kHz 

31.500 MHz 

TBD 

SVGA 

800x600 

56.250 Hz 

35.156 kHz 

36.000 MHz 

TBD 



60.317 Hz 

37.879 kHz 

40.000 MHz 

TBD 



72.188 Hz 

48.077 kHz 

50.000 MHz 

TBD 



75.000 Hz 

46.875 kHz 

49.500 MHz 

TBD 

XGA 

1024x768 

60.004 Hz 

48.363 kHz 

65.000 MHz 

TBD 



70.069 Hz 

56.476 kHz 

75.000 MHz 

TBD 



75.029 Hz 

60.023 kHz 

78.750 MHz 

TBD 

WXGA 

1280x768 

59.995 Hz 

47.396 kHz 

68.250 MHz 

TBD 



59.870 Hz 

47.776 kHz 

79.500 MHz 

TBD 



74.893 Hz 

60.289 kHz 

102.250 MHz 

TBD 


1360x 768 60.015 Hz 

47.712 kHz 

85.500 MHz 

TBD 

SXGA 

1280x1024 60.020 Hz 

63.981 kHz 

108.000 MHz 

TBD 



75.025 Hz 

79.976 kHz 

135.000 MHz 

TBD 

HDMI® signal formats 


NOTE 


❖ The HDMI® inputs on this TV only accept VGA, SVGA, XGA, 
WXGA, and SXGA signal formats which are compliant with 
VESA-DMT as in the table below. Since some computer, HDMI®, 
or DVI device input signals are different from the resolution and 
frequency described in the table below, the following problems 
may occur: incorrect display, false format detection, picture 
position failure, blur, or judder. In these cases, set the monitor 
output format on your computer, HDMI®, or DVI device to 
conform to any of the signals in the table below. 

❖ The signals whose vertical frequency is 24 Hz, 56 Hz, 70 Hz, 

72 Hz, or 75 Hz are converted to a 60 Hz signal. 

❖ When you connect a computer to this TV, it is recommended that 
you set the refresh rate of your computer to 60 Hz. 






















Specifications 

Acceptable signal fonnals for PC IN, HDMI®, and 3D 



Format Resolution V. Frequency H. Frequency 

Pixel Clock 
Frequency 

VESA 

Standard 

(DMT) 

VGA 

640 x 480 

59.940 Hz 

31.469 kHz 

25.175 MHz 

TBD 



72.809 Hz 

37.861 kHz 

31.500 MHz 

TBD 



75.000 Hz 

37.500 kHz 

31.500 MHz 

TBD 

SVGA 

800x600 

56.250 Hz 

35.156 kHz 

36.000 MHz 

TBD 



60.317 Hz 

37.879 kHz 

40.000 MHz 

TBD 



72.188 Hz 

48.077 kHz 

50.000 MHz 

TBD 



75.000 Hz 

46.875 kHz 

49.500 MHz 

TBD 

XGA 

1024x768 

60.004 Hz 

48.363 kHz 

65.000 MHz 

TBD 



70.069 Hz 

56.476 kHz 

75.000 MHz 

TBD 



75.029 Hz 

60.023 kHz 

78.750 MHz 

TBD 

WXGA 

1280x768 

59.995 Hz 

47.396 kHz 

68.250 MHz 

TBD 



59.870 Hz 

47.776 kHz 

79.500 MHz 

TBD 



74.893 Hz 

60.289 kHz 

102.250 MHz 

TBD 


1360x768 60.015 Hz 

47.712 kHz 

85.500 MHz 

TBD 

SXGA 

1280x1024 60.020Hz 

63.981 kHz 

108.000 MHz 

TBD 



75.000 Hz 

79.976 kHz 

135.000 MHz 

TBD 

480i 

720 x 480i 

59.940/60 Hz 

15.734/15.750 kHz 

27.000/27.027 MHz TBD 

480p 

720 x 480p 

59.940/60 Hz 

31.469/31.500 kHz 

27.000/27.027 MHz TBD 

720p 

1280 x 720p 59.940/60 Hz 

44.955/45.000 kHz 

74.176/74.250 MHz TBD 

1080i 

1920 x 1080i 59.940/60 Hz 

33.716/33.750 kHz 

74.176/74.250 MHz TBD 

1080p 

1920 x 1080p 23.976/24 Hz 

26.973/27.000 kHz 

74.176/74.250 MHz TBD 



59.940/60 Hz 

67.433/67.500 kHz 

148.352/ 

148.500 MHz 

TBD 



























Specifications 

Acceptable signal formats for PC IN, HDM1®, and 3D 


3D Signal formats* 

Resolution 

Aspect 

ratio 

V. Frequency 

H. Frequency 

Pixel Clock 
Frequency 

3D Structure 

1280 x 720p 

16:9 

23.98 Hz 

17.98 kHz 

59.341 MHz 

Side by Side (half) 
Top and Bottom 



29.97 Hz 

22.48 kHz 

74.176 MHz 

Side by Side (half) 

Top and Bottom 



59.940/60 Hz 

90.0/89.91 kHz 

148.352/148.500 MHz Frame Packing 




44.955/45.000 kHz 

74.176/74.250 MHz 

Side by Side (half) 




Top and Bottom 

1920 x 1080i 

16:9 

59.940/60 Hz 

33.716/33.750 kHz 

74.176/74.250 MHz 

Side by Side (half) 






Top and Bottom 

1920 x1080p 

16:9 

23.976/24 Hz 

54/53.94 kHz 

148.352/148.500 MHz Frame Packing 




26.973 kHz 

74.176/74.250 MHz 

Side by Side (half) 

Top and Bottom 



29.97/30 Hz 

67.5/67.43 kHz 

148.352/148.500 MHz Frame Packing 




33.716/33.75 kHz 

74.176/74.250 MHz 

Side by Side (half) 




Top and Bottom 



59.940/60 Hz 

67.433/67.500 kHz 

148.352/148.500 MHz Side by Side (half) 






Top and Bottom 


*Some content may not be supported depending on the input source format. 






















Specifications 

Operating; the TV with combination buttons 


Operating the TV with combination buttons 

You can directly operate the TV power, input switch, picture size 
switch, and picture mode switch by pressing a combination button 
while holding down a color button. 

Button Color Combination Button 

Behavior/Mode 


3D 

Power Off 


POWER 

Power On 


1 

Input 1 


2 

Input 2 


3 

Input 3 


4 

Input 4 

RED 

5 

Input 5 


6 

Input 6 


7 

Input 7 


8 

Input 8 


9 

Input 9 


0 

Input 10 


MUTE 

Mute On 


1 

Native (picture size) 


2 

4:3 (picture size) 


3 

TheaterWide 1 (picture size) 


4 

TheaterWide 2 (picture size) 

GREEN 

5 

TheaterWide 3 (picture size) 


6 

Full (picture size) 


7 

Normal (picture size) 


8 

Dot by Dot (picture size) 


MUTE 

1/2 Mute On 



























Specifications 

Operating the TV with combination buttons 


Button Color Combination Button 

Behavior/Mode 

1 

AutoView (picture mode) 

2 

Dynamic (picture mode) 

3 

Standard (picture mode) 

4 

Movie (picture mode) 

YELLOW 5 

- (picture mode) 

6 

Store (picture mode) 

7 

Game (picture mode) 

8 

PC (picture mode) 

MUTE 

Mute Off 













Index 


Numerics 

3D 

2D from Quick menu 79 
3D from Quick menu 78 
3D lock 83 
3D timer lock 83 
adjusting 2D to 3D depth 84 
auto start mode 81 
button operation 76 
change pin code 82 
delete pin code 82 
enable 3D timer 83 
enter new pin code 81 
forgotten pin code 82 
functions 74 
Native mode 80 
selecting format 76 
setting 3D pin code 81 
start message 82 
switch left right images 85 
switching display mode 76 
switching to 2D mode 79 
switching to 3D mode 77 
viewing images 72 


4/3 stretch 
using 114 

A 

advanced picture settings 

Auto Brightness Sensor 120 
Backlight Adjustment Pro 120 
Base Color Adjustment 121 
Color temperature 122 
ColorMaster™ 121 
DNR 119 
DynaLight® 118 
Dynamic Contrast 117 
Edge Enhancer 117 
MPEG NR 119 
resetting to factory default 122 
Static Gamma 118 
using 117 

Apps Control Profile 171 
audio 

adjusting balance 125 
adjusting range 126 
Audyssey Dynamic Volume® 
127 

bass/treble 126 


201 


Index 


Dolby® Digital Dynamic Range 
Control 126 
muting sound 125 
optical audio output format 126 
Auto Aspect 
using 114 
auto input 

features 70 

c 

cables 

3.5mm to RCA Y-cable 29 
analog RGB (15-pin) 29 
coaxial (F-type) 27 
component video (red/green/blue) 
28 

Dual-wand 1R blaster cable 29 
HDMI® 28 
LAN 30 
optical audio 29 
overview of cables 27 
standard A/V (red/white/yellow) 
27 

channel return 85 
channels 

auto tuning 66 

labeling analog TV channels 69 
labeling video inputs 70 
locking specific channels 95 
manual tuning 67 
next programmed channel 85 
skipping 68 

skipping video inputs 68 
specific channel 85 
storing in memory 66 
closed captions 

Analog CC mode 87 
button 90 

Digital CC settings 89 
using 87 
computer 

adjusting image 102 


setting the audio 103 
to the TV’s HDMI® 41 
using with the TV 102 
connecting 

a computer 39 
audio system 35 
cable TV 30 
camcorder 30 

computer to TV’s PC IN 39 
DVD player with ColorStream® 
31 

DVI device to HDMI® input 36 
HDMI® audio system 39 
HDMI® device to HDMI® input 
36 

IR devices 33 
satellite receiver 31 
to a computer (no Internet 
connection) 43 
to a home network 42 
to a home network (no Internet 
connection) 43 

to a home network ( wired Internet 
connection) 44 
to a home network (wireless 
Internet connection) 44 
TV’s HDMI® 41 
VCR 31 

VCR and antenna 30 
control other devices 

HDMI®-CEC Control 38 
control panel 
lock 97 

controlling other devices 
TV remote 38 

E 

ePORTAL 142 

add favorites 152 
Apps144 
create event 151 
create messages 151 


Index 


delete event 151 
editing favorite apps 152 
events 151 
MediaShare 157 
modify favorites 152 
preferences 153 
search 143 
select apps 144 
view favorites 152 
ePortal 142 

ePORTAL Internet 147 
access webpage 150 
adding favorites 150 
browsing favorites 149 
expert picture settings 
RGB Filter 123 
setting 122 
Test Pattern 122 
White Balance 123 
External Control Setup 167 

F 

Factory Defaults 
reset 107 
favorites 

adding 150 
browsing 149 
viewing 152 
features 21 

H 

HDMI® 

viewing signal information 102 
HDMI® CEC 

adjusting amplifier’s audio 100 
controlling playback devices 98 
input source selection 100 
other functions 101 
HDMI® CEC Control 
using 97 

HDMI® settings feature 
using 101 
home network 


using 129 

I 

icon 

safety 20 
initial settings 
change 64 

individual settings 65 
navigate the menu 64 
quick setup 64 
initial setup 51 

main menu layout 62 
menu navigation 61 
quick menu 63 
IR Blaster Out terminal 
using 33 

IR Blaster setup 55 

M 

Media Renderer 

device name setup 169 
maximum volume setup 170 
Media Controller setup 170 
MediaGuide 153 
operating 154 
setup 153 

MediaShare (Media Player) 
basic operation 158 
playing music files 162 
specifications 157 
viewing movie files 160 
viewing photo files 164 
Music 

access via ePORTAL 157 

N 

network 

advanced setup 136 
connection test 139 
DNS setup 137 
initial setup 58 
setup 131 
wireless setup 131 


Index 


Network Device Setup 167 
no signal power down 
set 106 

0 

overview 

installation 22 
setup 22 
use 22 

P 

parental controls 

blocking programs/movies by 
rating (V-Chip) 91 
using 91 
Photos 

access via ePORTAL 157 
picture 

adjusting 115 
adjusting quality 115 
picture mode 

selecting 115 
picture settings 
locking 124 
picture size 
4/3 111 

Dot by Dot 113 
Full 111 
Native 110 
Normal 113 
selecting 109 
TheaterWide 1 112 
TheaterWide 2 112 
TheaterWide 3 112 
pin code 

changing 91 
deleting 91 

entering new pin code 91 
forgotten 91 
setting pin code 90 
power failure 108 
program ratings 
displaying 95 


unlocking programs 95 

Q 

quick setup 

ANT/CABLE IN 66 
local time 65 
location 65 
menu language 65 

R 

rating system 93 

downloading additional 92 

s 

safety 

icons 20 

scrolling the picture 113 
shared inputs 

configuring 70 
SmartTV 

using 142 
YouTube™ 146 
SmartTV™ 

CinemaNow® 147 
Netflix 144 
VUDU™ 145 
software keyboard 
using 139 
software licenses 
show 141 
software upgrade 
performing 140 
specifications 

3D Signal formats 198 
acceptable signal formats 195 
audio power 192 
channel coverage 191 
ColorStream® HD input 193 
Digital audio output 193 
dimensions 194 
ethemet 194 
HDMI® input 193 
HDMI® signal formats 196 


Index 


mass (weight) 194 

operating conditions 194 

PC IN signal formats 195 

PC input 193 

power consumption 192 

power source 192 

remote, combination buttons 199 

speaker type 192 

supplied accessories 195 

TV system 191 

USB 194 

video/audio terminals 193 
wireless connection 193 
support information 
show 107 
SurfLock™ 
using 85 

T 

time limit 

set for games 96 
timer 

sleep timer 105 
turn on TV 104 
Toshiba A/V Remote App 
Combo 176 
controlling devices 173 
initial setup 172 
mouse control 175 
text input 175 

Toshiba MediaGuide app 177 
touchpad control 176 
Toshiba MediaGuide app 177 
detail screen 178 
Genre Bar 178 
movie/TV portal 178 
popup, detailed information 178 
search 178 
TV listings 177 
Toshiba Send & Play App 178 
launching 179 
text input 180 


troubleshooting 181 

channel tuning problems 184 
closed caption problems 185 
contact Toshiba 190 
HDMI® 186 

HDMI® CEC Control problems 
185 

light indicator 189 
light indicator functions 189 
MediaShare (Media Player) 
problems 188 
network problems 186 
picture problems 182 
Rating blocking problems 185 
remote control problems 184 
sound problems 184 
wireless network problems 188 
TV connections 
front 23 
side 23 

TV panel connections 
back 24 

TV panel controls 
front 23 
left side 23 
side 23 
TV remote 

control other devices 46 
effective range 48 
functionality 49 
install batteries 46 
TV status information 
show 106 

V 

Video 

access via ePORTAL 157 
video input 
locking 96 
selecting 86 

w 

web browser 147 


206 ln,lex 


access web page 150 
adding favorites 150 
browsing favorites 149